This module extends Base.Int32.
Interface from Base
val globalize : int32 -> int32include Base.Floatable.S with type t := int32
val of_float : float -> int32val to_float : int32 -> floatinclude Base.Intable.S with type t := int32
val of_int_exn : int -> int32val to_int_exn : int32 -> intinclude Base.Comparable.With_zero with type t := int32
val is_positive : int32 -> boolval is_non_negative : int32 -> boolval is_negative : int32 -> boolval is_non_positive : int32 -> boolReturns Neg, Zero, or Pos in a way consistent with the above functions.
val compare__local : int32 -> int32 -> intval equal__local : int32 -> int32 -> boolval of_string_opt : string -> int32 optionval to_string_hum : ?delimiter:char -> int32 -> stringdelimiter is an underscore by default.
Infix operators and constants
val (+) : int32 -> int32 -> int32val (-) : int32 -> int32 -> int32val (*) : int32 -> int32 -> int32val (**) : int32 -> int32 -> int32Negation
val (~-) : int32 -> int32There are two pairs of integer division and remainder functions, /% and %, and / and rem. They both satisfy the same equation relating the quotient and the remainder:
x = (x /% y) * y + (x % y);
x = (x / y) * y + (rem x y);
The functions return the same values if x and y are positive. They all raise if y = 0.
The functions differ if x < 0 or y < 0.
If y < 0, then % and /% raise, whereas / and rem do not.
x % y always returns a value between 0 and y - 1, even when x < 0. On the other hand, rem x y returns a negative value if and only if x < 0; that value satisfies abs (rem x y) <= abs y - 1.
val (/%) : int32 -> int32 -> int32val (%) : int32 -> int32 -> int32val (/) : int32 -> int32 -> int32val rem : int32 -> int32 -> int32val (//) : int32 -> int32 -> floatFloat division of integers.
val (land) : int32 -> int32 -> int32val (lor) : int32 -> int32 -> int32val (lxor) : int32 -> int32 -> int32val lnot : int32 -> int32val (lsl) : int32 -> int -> int32val (asr) : int32 -> int -> int32Other common functions
round rounds an int to a multiple of a given to_multiple_of argument, according to a direction dir, with default dir being `Nearest. round will raise if to_multiple_of <= 0. If the result overflows (too far positive or too far negative), round returns an incorrect result.
| `Down | rounds toward Int.neg_infinity |
| `Up | rounds toward Int.infinity |
| `Nearest | rounds to the nearest multiple, or `Up in case of a tie |
| `Zero | rounds toward zero |Here are some examples for round ~to_multiple_of:10 for each direction:
| `Down | {10 .. 19} --> 10 | { 0 ... 9} --> 0 | {-10 ... -1} --> -10 |
| `Up | { 1 .. 10} --> 10 | {-9 ... 0} --> 0 | {-19 .. -10} --> -10 |
| `Zero | {10 .. 19} --> 10 | {-9 ... 9} --> 0 | {-19 .. -10} --> -10 |
| `Nearest | { 5 .. 14} --> 10 | {-5 ... 4} --> 0 | {-15 ... -6} --> -10 |For convenience and performance, there are variants of round with dir hard-coded. If you are writing performance-critical code you should use these.
val round :
?dir:[ `Zero | `Nearest | `Up | `Down ] ->
int32 ->
to_multiple_of:int32 ->
int32val round_towards_zero : int32 -> to_multiple_of:int32 -> int32val round_down : int32 -> to_multiple_of:int32 -> int32val round_up : int32 -> to_multiple_of:int32 -> int32val round_nearest : int32 -> to_multiple_of:int32 -> int32Returns the absolute value of the argument. May be negative if the input is min_value.
Successor and predecessor functions
val succ : int32 -> int32val pred : int32 -> int32Exponentiation
val pow : int32 -> int32 -> int32pow base exponent returns base raised to the power of exponent. It is OK if base <= 0. pow raises if exponent < 0, or an integer overflow would occur.
Bit-wise logical operations
val bit_and : int32 -> int32 -> int32These are identical to land, lor, etc. except they're not infix and have different names.
val bit_or : int32 -> int32 -> int32val bit_xor : int32 -> int32 -> int32val bit_not : int32 -> int32val popcount : int32 -> intReturns the number of 1 bits in the binary representation of the input.
Bit-shifting operations
The results are unspecified for negative shifts and shifts >= num_bits.
val shift_left : int32 -> int -> int32Shifts left, filling in with zeroes.
val shift_right : int32 -> int -> int32Shifts right, preserving the sign of the input.
Increment and decrement functions for integer references
val decr : int32 Stdlib.ref -> unitval incr : int32 Stdlib.ref -> unitval of_int32_exn : int32 -> int32val to_int32_exn : int32 -> int32val of_int64_exn : int64 -> int32val to_int64 : int32 -> int64val of_nativeint_exn : nativeint -> int32val to_nativeint_exn : int32 -> nativeintval of_float_unchecked : float -> int32of_float_unchecked truncates the given floating point number to an integer, rounding towards zero. The result is unspecified if the argument is nan or falls outside the range of representable integers.
The number of bits available in this integer type. Note that the integer representations are signed.
The largest representable integer.
The smallest representable integer.
val (lsr) : int32 -> int -> int32Same as shift_right_logical.
val shift_right_logical : int32 -> int -> int32Shifts right, filling in with zeroes, which will not preserve the sign of the input.
val ceil_pow2 : int32 -> int32ceil_pow2 x returns the smallest power of 2 that is greater than or equal to x. The implementation may only be called for x > 0. Example: ceil_pow2 17 = 32
val floor_pow2 : int32 -> int32floor_pow2 x returns the largest power of 2 that is less than or equal to x. The implementation may only be called for x > 0. Example: floor_pow2 17 = 16
val ceil_log2 : int32 -> intceil_log2 x returns the ceiling of log-base-2 of x, and raises if x <= 0.
val floor_log2 : int32 -> intfloor_log2 x returns the floor of log-base-2 of x, and raises if x <= 0.
val is_pow2 : int32 -> boolis_pow2 x returns true iff x is a power of 2. is_pow2 raises if x <= 0.
Returns the number of leading zeros in the binary representation of the input, as an integer between 0 and one less than num_bits.
The results are unspecified for t = 0.
Returns the number of trailing zeros in the binary representation of the input, as an integer between 0 and one less than num_bits.
The results are unspecified for t = 0.
A sub-module designed to be opened to make working with ints more convenient.
Conversion functions
val of_int : int -> int32 optionval to_int : int32 -> int optionval of_int32 : int32 -> int32val to_int32 : int32 -> int32val of_nativeint : nativeint -> int32 optionval to_nativeint : int32 -> nativeintval of_int64 : int64 -> int32 optionTruncating conversions
These functions return the least-significant bits of the input. In cases where optional conversions return Some x, truncating conversions return x.
val of_int_trunc : int -> int32val to_int_trunc : int32 -> intval of_nativeint_trunc : nativeint -> int32val of_int64_trunc : int64 -> int32Low-level float conversions
val bits_of_float : float -> int32Rounds a regular 64-bit OCaml float to a 32-bit IEEE-754 "single" float, and returns its bit representation. We make no promises about the exact rounding behavior, or what happens in case of over- or underflow.
val float_of_bits : int32 -> floatCreates a 32-bit IEEE-754 "single" float from the given bits, and converts it to a regular 64-bit OCaml float.
Byte swap operations
See Int's byte swap section for a description of Base's approach to exposing byte swap primitives.
When compiling for 64-bit machines, if signedness of the output value does not matter, use byteswap functions for int64, if possible, for better performance. As of writing, 32-bit byte swap operations on 64-bit machines have extra overhead for moving to 32-bit registers and sign-extending values when returning to 64-bit registers.
The x86 instruction sequence that demonstrates the overhead is in base/bench/bench_int.ml
val bswap16 : int32 -> int32val bswap32 : int32 -> int32Extensions
include Identifiable.S
with type t := {t}1
with type comparator_witness := comparator_witness
include Base.Stringable.S with type t := {t}1
val of_string : string -> {t}1val to_string : {t}1 -> stringinclude Comparable.S_binable
with type t := {t}1
with type comparator_witness := comparator_witness
include Base.Comparable.S
with type t := {t}1
with type comparator_witness := comparator_witness
include Base.Comparisons.S with type t := {t}1
include Base.Comparisons.Infix with type t := {t}1
val (>=) : {t}1 -> {t}1 -> boolval (<=) : {t}1 -> {t}1 -> boolval (=) : {t}1 -> {t}1 -> boolval (>) : {t}1 -> {t}1 -> boolval (<) : {t}1 -> {t}1 -> boolval (<>) : {t}1 -> {t}1 -> boolval equal : {t}1 -> {t}1 -> boolval compare : {t}1 -> {t}1 -> intcompare t1 t2 returns 0 if t1 is equal to t2, a negative integer if t1 is less than t2, and a positive integer if t1 is greater than t2.
val min : {t}1 -> {t}1 -> {t}1val max : {t}1 -> {t}1 -> {t}1val ascending : {t}1 -> {t}1 -> intascending is identical to compare. descending x y = ascending y x. These are intended to be mnemonic when used like List.sort ~compare:ascending and List.sort
~cmp:descending, since they cause the list to be sorted in ascending or descending order, respectively.
val descending : {t}1 -> {t}1 -> intval between : {t}1 -> low:{t}1 -> high:{t}1 -> boolbetween t ~low ~high means low <= t <= high
val clamp_exn : {t}1 -> min:{t}1 -> max:{t}1 -> {t}1clamp_exn t ~min ~max returns t', the closest value to t such that between t' ~low:min ~high:max is true.
Raises if not (min <= max).
include Quickcheckable.S_int with type t := {t}1
include Quickcheck_intf.S_range with type t := {t}1
gen_incl lower_bound upper_bound produces values between lower_bound and upper_bound, inclusive. It uses an ad hoc distribution that stresses boundary conditions more often than a uniform distribution, while still able to produce any value in the range. Raises if lower_bound > upper_bound.
gen_uniform_incl lower_bound upper_bound produces a generator for values uniformly distributed between lower_bound and upper_bound, inclusive. Raises if lower_bound > upper_bound.
gen_log_uniform_incl lower_bound upper_bound produces a generator for values between lower_bound and upper_bound, inclusive, where the number of bits used to represent the value is uniformly distributed. Raises if (lower_bound < 0) ||
(lower_bound > upper_bound).
gen_log_incl lower_bound upper_bound is like gen_log_uniform_incl, but weighted slightly more in favor of generating lower_bound and upper_bound specifically.