On This Page
Legend:
Library
Module
Module type
Parameter
Class
Class type
Library
Module
Module type
Parameter
Class
Class type
package tls-mirage
TLS module given a flow
Parameters
module F : Mirage_flow.SSignature
type error = [ | `Tls_alert of Tls.Packet.alert_type| `Tls_failure of Tls.Engine.failure| `Read of F.error| `Write of F.write_error
]possible errors: incoming alert, processing failure, or a problem in the underlying flow.
The type for write errors.
we provide the FLOW interface
include Mirage_flow.S
with type error := error
and type write_error := write_error
val pp_write_error : write_error Fmt.tpp_write_error is the pretty-printer for write errors.
The type for flows. A flow represents the state of a single reliable stream that is connected to an endpoint.
val read : flow -> (Cstruct.t Mirage_flow.or_eof, error) Stdlib.result Lwt.tread flow blocks until some data is available and returns a fresh buffer containing it.
The returned buffer will be of a size convenient to the flow implementation, but will always have at least 1 byte.
When read returns `Eof or an error, close (or shutdown) should be called on the flow by the client. Once read returned `Eof or an error, no subsequent read call will be successful.
val write : flow -> Cstruct.t -> (unit, write_error) Stdlib.result Lwt.twrite flow buffer writes a buffer to the flow. There is no indication when the buffer has actually been sent and, therefore, it must not be reused. The contents may be transmitted in separate packets, depending on the underlying transport. The result Ok () indicates success, Error `Closed indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.
The promise is resolved when the buffer has been accepted by the implementation (if a partial write occured, write will wait until the remainder of the buffer has been accepted by the implementation).
If write returns an error, close (or shutdown) should be called on the flow by the client. Once write returned an error, no subsequent write or writev call will be successful.
val writev : flow -> Cstruct.t list -> (unit, write_error) Stdlib.result Lwt.twritev flow buffers writes a sequence of buffers to the flow. There is no indication when the buffers have actually been sent and, therefore, they must not be reused. The result Ok () indicates success, Error `Closed indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.
The promise is resolved when the buffers have been accepted by the implementation (if a partial write occured, writev will wait until all buffers have been accepted by the implementation).
If writev returns an error, close (or shutdown) should be called on the flow by the client. Once writev returned an error, no subsequent writev or write call will be successful.
val shutdown : flow -> [ `read | `write | `read_write ] -> unit Lwt.tshutdown flow mode shuts down the flow for the specific mode: A flow which is shutdown `read (or `read_write) will never be read again (subsequent calls will return `Eof); a flow which is shutdown `write (or `read_write) flushes all pending writes and signals the remote endpoint there won't be any future write or writev calls (subsequent calls will return `Closed). E.g. in TCP, the signalling is done by sending a segment with the FIN flag.
If this flow is layered upon another flow' (e.g. TLS over TCP), and the internal state after shutdown is `Closed, close on the underlying flow' is executed.
val close : flow -> unit Lwt.tclose flow terminates the flow and frees all associated data. Any subsequent read or write will return an error. A subsequent close will not do anything (esp. not raising an exception), but it may log an error.
If this flow is layered upon another flow' (e.g. TLS over TCP), close on the underlying flow' is executed.
underlying t returns the underlying flow. This is useful to extract information such as src and dst of that flow.
val reneg :
?authenticator:X509.Authenticator.t ->
?acceptable_cas:X509.Distinguished_name.t list ->
?cert:Tls.Config.own_cert ->
?drop:bool ->
flow ->
(unit, [ write_error | `Msg of string ]) Stdlib.result Lwt.treneg ~authenticator ~acceptable_cas ~cert ~drop t renegotiates the session, and blocks until the renegotiation finished. Optionally, a new authenticator and acceptable_cas can be used. The own certificate can be adjusted by cert. If drop is true (the default), application data received before the renegotiation finished is dropped.
val key_update :
?request:bool ->
flow ->
(unit, [ write_error | `Msg of string ]) Stdlib.result Lwt.tkey_update ~request t updates the traffic key and requests a traffic key update from the peer if request is provided and true (the default). This is only supported in TLS 1.3.
val client_of_flow :
Tls.Config.client ->
?host:[ `host ] Domain_name.t ->
F.flow ->
(flow, write_error) Stdlib.result Lwt.tclient_of_flow client ~host flow upgrades the existing connection to TLS using the client configuration, using host as peer name.
val server_of_flow :
Tls.Config.server ->
F.flow ->
(flow, write_error) Stdlib.result Lwt.tserver_of_flow server flow upgrades the flow to a TLS connection using the server configuration.
val epoch : flow -> (Tls.Core.epoch_data, unit) Stdlib.resultepoch flow extracts information of the established session.
On This Page