package async_unix

  1. Overview
  2. Docs
package async_unix
Legend:
Library
Module
Module type
Parameter
Class
Class type
include module type of struct include Core.Sexp end
type t = Base.Sexp.t =
  1. | Atom of Base.String.t
  2. | List of t Base.List.t
val bin_read_t : t Bin_prot.Read.reader
val __bin_read_t__ : (Base.Int.t -> t) Bin_prot.Read.reader
val bin_reader_t : t Bin_prot.Type_class.reader
val bin_size_t : t Bin_prot.Size.sizer
val bin_write_t : t Bin_prot.Write.writer
val bin_writer_t : t Bin_prot.Type_class.writer
val bin_shape_t : Bin_prot.Shape.t
val hash_fold_t : Base.Hash.state -> t -> Base.Hash.state
val hash : t -> Base.Hash.hash_value
module O = Core.Sexp.O
include Core_kernel.Comparable.S with type t := t
include Base.Comparable.S with type t := t
include Base.Comparisons.S with type t := t
include Base.Comparisons.Infix with type t := t
val (>=) : t -> t -> bool
val (<=) : t -> t -> bool
val (=) : t -> t -> bool
val (>) : t -> t -> bool
val (<) : t -> t -> bool
val (<>) : t -> t -> bool
val equal : t -> t -> bool
val min : t -> t -> t
val max : t -> t -> t
val ascending : t -> t -> int

ascending is identical to compare. descending x y = ascending y x. These are intended to be mnemonic when used like List.sort ~compare:ascending and List.sort ~cmp:descending, since they cause the list to be sorted in ascending or descending order, respectively.

val descending : t -> t -> int
val between : t -> low:t -> high:t -> bool

between t ~low ~high means low <= t <= high

val clamp_exn : t -> min:t -> max:t -> t

clamp_exn t ~min ~max returns t', the closest value to t such that between t' ~low:min ~high:max is true.

Raises if not (min <= max).

val clamp : t -> min:t -> max:t -> t Base.Or_error.t
include Base.Comparator.S with type t := t
type comparator_witness = Core.Sexp.comparator_witness
val validate_lbound : min:t Base.Maybe_bound.t -> t Base.Validate.check
val validate_ubound : max:t Base.Maybe_bound.t -> t Base.Validate.check
val validate_bound : min:t Base.Maybe_bound.t -> max:t Base.Maybe_bound.t -> t Base.Validate.check
module Replace_polymorphic_compare = Core.Sexp.Replace_polymorphic_compare
module Map = Core.Sexp.Map
module Set = Core.Sexp.Set
include Base.Stringable.S with type t := t
include Core_kernel.Quickcheckable.S with type t := t
include module type of struct include Sexplib.Sexp end with type t := t
include Sexplib.Sexp_intf.S with type t := t

Type of bigstrings

val compare : t -> t -> int
Defaults
val default_indent : int ref

default_indent reference to default indentation level for human-readable conversions. Initialisation value: 2.

S-expression size
val size : t -> int * int

size sexp

  • returns

    (n_atoms, n_chars), where n_atoms is the number of atoms in S-expression sexp, and n_chars is the number of characters in the atoms of the S-expression.

Scan functions
val scan_sexp : ?buf:Buffer.t -> Lexing.lexbuf -> t

scan_sexp ?buf lexbuf scans an S-expression from lex buffer lexbuf using the optional string buffer buf for storing intermediate strings.

val scan_sexps : ?buf:Buffer.t -> Lexing.lexbuf -> t list

scan_sexps ?buf lexbuf reads a list of whitespace separated S-expressions from lex buffer lexbuf using the optional string buffer buf for storing intermediate strings.

val scan_rev_sexps : ?buf:Buffer.t -> Lexing.lexbuf -> t list

scan_rev_sexps ?buf lexbuf same as scan_sexps, but returns the reversed list and is slightly more efficient.

val scan_sexp_opt : ?buf:Buffer.t -> Lexing.lexbuf -> t option

scan_sexp_opt ?buf lexbuf is equivalent to scan_sexp ?buf lexbuf except that it returns None when the eof is reached.

val scan_iter_sexps : ?buf:Buffer.t -> f:(t -> unit) -> Lexing.lexbuf -> unit

scan_iter_sexps ?buf ~f lexbuf iterates over all whitespace separated S-expressions scanned from lex buffer lexbuf using function f, and the optional string buffer buf for storing intermediate strings.

val scan_fold_sexps : ?buf:Buffer.t -> f:('a -> t -> 'a) -> init:'a -> Lexing.lexbuf -> 'a

scan_fold_sexps ?buf ~f ~init lexbuf folds over all whitespace separated S-expressions scanned from lex buffer lexbuf using function f, initial state init, and the optional string buffer buf for storing intermediate strings.

val scan_sexps_conv : ?buf:Buffer.t -> f:(t -> 'a) -> Lexing.lexbuf -> 'a list

scan_sexps_conv ?buf ~f lexbuf maps all whitespace separated S-expressions scanned from lex buffer lexbuf to some list using function f, and the optional string buffer buf for storing intermediate strings.

Type and exception definitions for (partial) parsing
module Parse_pos = Core.Sexp.Parse_pos
module Cont_state = Core.Sexp.Cont_state
type ('a, 't) parse_result = ('a, 't) Sexplib.Pre_sexp.parse_result =
  1. | Done of 't * Parse_pos.t
    (*

    Done (t, parse_pos) finished parsing an S-expression. Current parse position is parse_pos.

    *)
  2. | Cont of Cont_state.t * ('a, 't) parse_fun
    (*

    Cont (cont_state, parse_fun) met the end of input before completely parsing an S-expression. The user has to call parse_fun to continue parsing the S-expression in another buffer. cont_state is the current parsing state of the continuation. NOTE: the continuation may only be called once and will raise Failure otherwise!

    *)

Type of result from calling Sexp.parse.

and ('a, 't) parse_fun = pos:int -> len:int -> 'a -> ('a, 't) parse_result

Type of parsing functions with given offsets and lengths.

module Annotated = Core.Sexp.Annotated

Module for parsing S-expressions annotated with location information

type 't parse_state = private 't Sexplib.Pre_sexp.parse_state = {
  1. parse_pos : Parse_pos.t;
    (*

    Current parse position

    *)
}

Type of state maintained during parsing

type parse_error = Sexplib.Pre_sexp.parse_error = {
  1. err_msg : string;
    (*

    Reason why parsing failed

    *)
  2. parse_state : [ `Sexp of t list list parse_state | `Annot of Annotated.stack parse_state ];
    (*

    State of parser

    *)
}

Type of parse errors

exception Parse_error of parse_error

Exception raised during partial parsing

Unannotated (partial) parsing
val parse : ?parse_pos:Parse_pos.t -> ?len:int -> string -> (string, t) parse_result

parse ?parse_pos ?len str (partially) parses an S-expression in string buffer str starting out with position information provided in parse_pos and reading at most len characters. To parse a single atom that is not delimited by whitespace it is necessary to call this function a second time with the returned continuation, and a dummy buffer that contains whitespace.

parse starts parsing str at position parse_pos.buf_pos. Each subsequent parse_fun from a Cont uses the buf and pos that is supplied to it. The final parse_fun that returns Done mutates the buf_pos in the originally supplied parse_pos, and then returns it.

  • parameter parse_pos

    default = Parse_pos.create ()

  • parameter len

    default = String.length str - parse_pos.Parse_pos.buf_pos

val parse_bigstring : ?parse_pos:Parse_pos.t -> ?len:int -> bigstring -> (bigstring, t) parse_result

parse_bigstring ?parse_pos ?len str same as parse, but operates on bigstrings.

val input_sexp : ?parse_pos:Parse_pos.t -> in_channel -> t

input_sexp ?parse_pos ic parses an S-expression from input channel ic using initial position information in parse_pos. NOTE: this function is not as fast on files as Sexp.load_sexp, and is also slightly slower than the scan-functions. But it is guaranteed that input_sexp is only going to read data parseable as an S-expression. Thus, subsequent input functions will see the data immediately following it.

  • parameter parse_pos

    default = Parse_pos.create ()

val input_sexps : ?parse_pos:Parse_pos.t -> ?buf:bytes -> in_channel -> t list

input_sexps ?parse_pos ?buf ic parses whitespace separated S-expressions from input channel ic until EOF is reached. Faster than the scan-functions.

  • parameter parse_pos

    default = Parse_pos.create ()

val input_rev_sexps : ?parse_pos:Parse_pos.t -> ?buf:bytes -> in_channel -> t list

input_rev_sexps ?parse_pos ?buf ic same as Sexp.input_sexps, but returns a reversed list of S-expressions, which is slightly more efficient.

Loading of (converted) S-expressions
val load_sexp : ?strict:bool -> ?buf:bytes -> string -> t

load_sexp ?strict ?buf file reads one S-expression from file using buffer buf for storing intermediate data. Faster than the scan-functions.

  • raises Failure

    if parsing reached the end of file before one S-expression could be read.

  • raises Failure

    if strict is true and there is more than one S-expression in the file.

  • parameter strict

    default = true

val load_sexps : ?buf:bytes -> string -> t list

load_sexps ?buf file reads a list of whitespace separated S-expressions from file using buffer buf for storing intermediate data. Faster than the scan-functions.

  • raises Parse_error

    if there is unparseable data in the file.

  • raises Failure

    if parsing reached the end of file before the last S-expression could be fully read.

val load_rev_sexps : ?buf:bytes -> string -> t list

load_rev_sexps ?buf file same as Sexp.load_sexps, but returns a reversed list of S-expressions, which is slightly more efficient.

val load_sexp_conv : ?strict:bool -> ?buf:bytes -> string -> (t -> 'a) -> 'a Annotated.conv

load_sexp_conv ?strict ?buf file f like Sexp.load_sexp, but performs a conversion on the fly using f. Performance is equivalent to executing Sexp.load_sexp and performing conversion when there are no errors. In contrast to the plain S-expression loader, this function not only performs the conversion, it will give exact error ranges for conversion errors.

  • raises Parse_error

    if there is unparseable data in the file.

  • raises Failure

    if parsing reached the end of file before the last S-expression could be fully read.

val load_sexp_conv_exn : ?strict:bool -> ?buf:bytes -> string -> (t -> 'a) -> 'a

load_sexp_conv_exn ?strict ?buf file f like load_sexp_conv, but returns the converted value or raises Of_sexp_error with exact location information in the case of a conversion error.

val load_sexps_conv : ?buf:bytes -> string -> (t -> 'a) -> 'a Annotated.conv list

load_sexps_conv ?buf file f like Sexp.load_sexps, but performs a conversion on the fly using f. Performance is equivalent to executing Sexp.load_sexps and performing conversion when there are no errors. In contrast to the plain S-expression loader, this function not only performs the conversion, it will give exact error ranges for conversion errors.

  • raises Parse_error

    if there is unparseable data in the file.

  • raises Failure

    if parsing reached the end of file before the last S-expression could be fully read.

val load_sexps_conv_exn : ?buf:bytes -> string -> (t -> 'a) -> 'a list

load_sexps_conv_exn ?buf file f like load_sexps_conv, but returns the converted value or raises Of_sexp_error with exact location information in the case of a conversion error.

Output of S-expressions to I/O-channels

NOTE: for performance reasons these output functions may need to allocate large strings to write out huge S-expressions. This may cause problems on 32-bit platforms. If you think that you may need to write huge S-expressions on such platforms, you might want to use the pretty-printers that write to formatters instead (see further below).

val output_hum : out_channel -> t -> unit

output_hum oc sexp outputs S-expression sexp to output channel oc in human readable form.

val output_hum_indent : int -> out_channel -> t -> unit

output_hum_indent indent oc sexp outputs S-expression sexp to output channel oc in human readable form using indentation level indent.

val output_mach : out_channel -> t -> unit

output_mach oc sexp outputs S-expression sexp to output channel oc in machine readable (i.e. most compact) form.

val output : out_channel -> t -> unit

output oc sexp same as output_mach.

Output of S-expressions to file

All save-functions write to a temporary file before moving it into place to avoid intermittent garbling of existing files, which may cause problems for other processes that try to read.

Output of S-expressions to formatters
val pp_hum : Format.formatter -> t -> unit

pp_hum ppf sexp outputs S-expression sexp to formatter ppf in human readable form.

val pp_hum_indent : int -> Format.formatter -> t -> unit

pp_hum_indent n ppf sexp outputs S-expression sexp to formatter ppf in human readable form and indentation level n.

val pp_mach : Format.formatter -> t -> unit

pp_mach ppf sexp outputs S-expression sexp to formatter ppf in machine readable (i.e. most compact) form.

val pp : Format.formatter -> t -> unit

pp ppf sexp same as pp_mach.

String and bigstring conversions
module Of_string_conv_exn = Core.Sexp.Of_string_conv_exn

Module encapsulating the exception raised by string converters when type conversions fail.

val of_string : string -> t

of_string str converts string str to an S-expression. NOTE: trailing whitespace is considered an error, which may be overly strict for some applications. Either strip the string of trailing whitespace first, or, even cheaper, use parse instead.

val of_string_conv : string -> (t -> 'a) -> 'a Annotated.conv

of_string_conv str conv like of_string, but performs type conversion with conv.

  • returns

    conversion result.

val of_string_conv_exn : string -> (t -> 'a) -> 'a

of_string_conv_exn str conv like of_string_conv, but raises Of_string_conv_exn.E if type conversion fails.

  • returns

    converted value.

val of_bigstring : bigstring -> t

of_bigstring bstr same as of_string, but operates on bigstrings.

val of_bigstring_conv : bigstring -> (t -> 'a) -> 'a Annotated.conv

of_bigstring_conv bstr conv like of_bigstring, but performs type conversion with conv.

  • returns

    conversion result.

val of_bigstring_conv_exn : bigstring -> (t -> 'a) -> 'a

of_bigstring_conv_exn bstr conv like of_bigstring_conv, but raises Of_string_conv_exn.E if type conversion fails.

  • returns

    converted value.

val to_string_hum : ?indent:int -> t -> string

to_string_hum ?indent sexp converts S-expression sexp to a string in human readable form with indentation level indent.

  • parameter indent

    default = !default_indent

val to_string_mach : t -> string

to_string_mach sexp converts S-expression sexp to a string in machine readable (i.e. most compact) form.

val to_string : t -> string

to_string sexp same as to_string_mach.

Buffer conversions
val to_buffer_hum : buf:Buffer.t -> ?indent:int -> t -> unit

to_buffer_hum ~buf ?indent sexp outputs the S-expression sexp converted to a string in human readable form to buffer buf.

  • parameter indent

    default = !default_indent

val to_buffer_mach : buf:Buffer.t -> t -> unit

to_buffer_mach ~buf sexp outputs the S-expression sexp converted to a string in machine readable (i.e. most compact) form to buffer buf.

val to_buffer : buf:Buffer.t -> t -> unit

to_buffer ~buf sexp same as to_buffer_mach.

val to_buffer_gen : buf:'buffer -> add_char:('buffer -> char -> unit) -> add_string:('buffer -> string -> unit) -> t -> unit

to_buffer_gen ~buf ~add_char ~add_string sexp outputs the S-expression sexp converted to a string to buffer buf using the output functions add_char and add_string.

Utilities for automated type conversions
val unit : t

unit the unit-value as expressed by an S-expression.

val is_unit : t -> bool
val sexp_of_t : t -> t

sexp_of_t sexp maps S-expressions which are part of a type with automated S-expression conversion to themselves.

val t_of_sexp : t -> t

t_of_sexp sexp maps S-expressions which are part of a type with automated S-expression conversion to themselves.

Utilities for conversion error handling
type found = [
  1. | `Found
  2. | `Pos of int * found
]

Type of successful search results. `Found means that an S-expression was found at the immediate position, and `Pos (pos, found) indicates that it was found at position pos within a structure (= S-expression list) where found describes recursively where it was found in that structure.

type search_result = [
  1. | `Not_found
  2. | found
]

Type of search results. `Not_found means that an S-expression was not found within another S-expression.

val search_physical : t -> contained:t -> search_result

search_physical sexp ~contained

  • returns

    the search result indicating whether, and if, where the S-expression contained was found within S-expression sexp.

val subst_found : t -> subst:t -> found -> t

subst_found sexp ~subst found

  • returns

    the S-expression that results from substituting subst within S-expression sexp at the location described by found.

module With_layout = Core.Sexp.With_layout

S-expressions annotated with relative source positions and comments

exception Of_sexp_error of Base.Exn.t * t
val of_float_style : [ `Underscores | `No_underscores ] Base.Ref.t
val of_int_style : [ `Underscores | `No_underscores ] Base.Ref.t
type 'a no_raise = 'a

no_raise is the identity, but by using 'a no_raise in a sexpable type, the resulting use sexp_of_no_raise protects the conversion of 'a to a sexp so that if it fails, one gets a sexp with an error message about the failure, rather than an exception being raised.

WARNING: The resulting no_raise_of_sexp can still raise.

val bin_read_no_raise : 'a Bin_prot.Read.reader -> 'a no_raise Bin_prot.Read.reader
val __bin_read_no_raise__ : 'a Bin_prot.Read.reader -> (Base.Int.t -> 'a no_raise) Bin_prot.Read.reader
val bin_size_no_raise : 'a Bin_prot.Size.sizer -> 'a no_raise Bin_prot.Size.sizer
val bin_write_no_raise : 'a Bin_prot.Write.writer -> 'a no_raise Bin_prot.Write.writer
val bin_shape_no_raise : Bin_prot.Shape.t -> Bin_prot.Shape.t
val no_raise_of_sexp : (Ppx_sexp_conv_lib.Sexp.t -> 'a) -> Ppx_sexp_conv_lib.Sexp.t -> 'a no_raise
val sexp_of_no_raise : ('a -> Ppx_sexp_conv_lib.Sexp.t) -> 'a no_raise -> Ppx_sexp_conv_lib.Sexp.t
module Sexp_maybe = Core.Sexp.Sexp_maybe

If sexp_of_t fails, it returns Error rather than raising. You can convert values of this type to and from sexp in processes that can or cannot parse the underlying sexp in any combination and still recover the original value. Also, the Error case contains a human-readable description of the error.

module With_text = Core.Sexp.With_text

A With_text.t is a value paired with the full textual representation of its sexp. This is useful for dealing with the case where you want to keep track of a value along with the format of the s-expression it was generated from, which allows you to maintain formatting details, comments, etc.

val of_sexp_allow_extra_fields : (Base.Sexp.t -> 'a) -> Base.Sexp.t -> 'a

of_sexp_allow_extra_fields of_sexp sexp uses of_sexp to convert sexp to a value, but will not fail if there are any extra fields in a record (even deeply nested records).

The implementation uses global state, so it is not thread safe.

val save : ?perm:int -> string -> t -> unit
  • deprecated [since 2015-12] Use Writer.save_sexp ~hum:false to avoid blocking.
val save_hum : ?perm:int -> string -> t -> unit
  • deprecated [since 2015-12] Use Writer.save_sexp ~hum:true to avoid blocking.
val save_mach : ?perm:int -> string -> t -> unit
  • deprecated [since 2015-12] Use Writer.save_sexp ~hum:false to avoid blocking.
val save_sexps : ?perm:int -> string -> t list -> unit
  • deprecated [since 2015-12] Use Writer.save_sexps ~hum:false to avoid blocking.
val save_sexps_hum : ?perm:int -> string -> t list -> unit
  • deprecated [since 2015-12] Use Writer.save_sexps ~hum:true to avoid blocking.
val save_sexps_mach : ?perm:int -> string -> t list -> unit
  • deprecated [since 2015-12] Use Writer.save_sexps ~hum:false to avoid blocking.
OCaml

Innovation. Community. Security.

GitHub Discord Twitter Peertube RSS
About
Changelog Releases Industrial Users Academic Users Why OCaml
Ecosystem
Packages Community Events OCaml Planet Jobs
Resources
Install OCaml Get Started Platform Tools Language Manual Standard Library API Books Exercises Papers OCaml Playground Logo
Policies
Carbon Footprint Governance Privacy Code of Conduct