Module Core.Int64Source
This module extends Base.Int64.
Interface from Base
Sourceval globalize : int64 -> int64 include Base.Comparable.With_zero with type t := int64
Sourceval is_positive : int64 -> bool Sourceval is_non_negative : int64 -> bool Sourceval is_negative : int64 -> bool Sourceval is_non_positive : int64 -> bool Returns Neg, Zero, or Pos in a way consistent with the above functions.
Sourceval compare__local : int64 -> int64 -> int Sourceval equal__local : int64 -> int64 -> bool Sourceval of_string_opt : string -> int64 option Sourceval to_string_hum : ?delimiter:char -> int64 -> string delimiter is an underscore by default.
Infix operators and constants
Negation
There are two pairs of integer division and remainder functions, /% and %, and / and rem. They both satisfy the same equation relating the quotient and the remainder:
x = (x /% y) * y + (x % y);
x = (x / y) * y + (rem x y);
The functions return the same values if x and y are positive. They all raise if y = 0.
The functions differ if x < 0 or y < 0.
If y < 0, then % and /% raise, whereas / and rem do not.
x % y always returns a value between 0 and y - 1, even when x < 0. On the other hand, rem x y returns a negative value if and only if x < 0; that value satisfies abs (rem x y) <= abs y - 1.
Sourceval rem : int64 -> int64 -> int64 Other common functions
round rounds an int to a multiple of a given to_multiple_of argument, according to a direction dir, with default dir being `Nearest. round will raise if to_multiple_of <= 0. If the result overflows (too far positive or too far negative), round returns an incorrect result.
| `Down | rounds toward Int.neg_infinity |
| `Up | rounds toward Int.infinity |
| `Nearest | rounds to the nearest multiple, or `Up in case of a tie |
| `Zero | rounds toward zero |
Here are some examples for round ~to_multiple_of:10 for each direction:
| `Down | {10 .. 19} --> 10 | { 0 ... 9} --> 0 | {-10 ... -1} --> -10 |
| `Up | { 1 .. 10} --> 10 | {-9 ... 0} --> 0 | {-19 .. -10} --> -10 |
| `Zero | {10 .. 19} --> 10 | {-9 ... 9} --> 0 | {-19 .. -10} --> -10 |
| `Nearest | { 5 .. 14} --> 10 | {-5 ... 4} --> 0 | {-15 ... -6} --> -10 |For convenience and performance, there are variants of round with dir hard-coded. If you are writing performance-critical code you should use these.
Sourceval round :
?dir:[ `Zero | `Nearest | `Up | `Down ] ->
int64 ->
to_multiple_of:int64 ->
int64 Sourceval round_towards_zero : int64 -> to_multiple_of:int64 -> int64 Sourceval round_down : int64 -> to_multiple_of:int64 -> int64 Sourceval round_up : int64 -> to_multiple_of:int64 -> int64 Sourceval round_nearest : int64 -> to_multiple_of:int64 -> int64 Successor and predecessor functions
Sourceval succ : int64 -> int64 Sourceval pred : int64 -> int64 Exponentiation
Sourceval pow : int64 -> int64 -> int64 pow base exponent returns base raised to the power of exponent. It is OK if base <= 0. pow raises if exponent < 0, or an integer overflow would occur.
Bit-wise logical operations
Sourceval bit_and : int64 -> int64 -> int64 These are identical to land, lor, etc. except they're not infix and have different names.
Sourceval bit_or : int64 -> int64 -> int64 Sourceval bit_xor : int64 -> int64 -> int64 Sourceval bit_not : int64 -> int64 Sourceval popcount : int64 -> int Returns the number of 1 bits in the binary representation of the input.
Bit-shifting operations
The results are unspecified for negative shifts and shifts >= num_bits.
Sourceval shift_left : int64 -> int -> int64 Shifts left, filling in with zeroes.
Sourceval shift_right : int64 -> int -> int64 Shifts right, preserving the sign of the input.
Increment and decrement functions for integer references
Sourceval of_int32_exn : int32 -> int64 Sourceval to_int32_exn : int64 -> int32 Sourceval of_int64_exn : int64 -> int64 Sourceval to_int64 : int64 -> int64 Sourceval of_nativeint_exn : nativeint -> int64 Sourceval to_nativeint_exn : int64 -> nativeint Sourceval of_float_unchecked : float -> int64 of_float_unchecked truncates the given floating point number to an integer, rounding towards zero. The result is unspecified if the argument is nan or falls outside the range of representable integers.
The number of bits available in this integer type. Note that the integer representations are signed.
The largest representable integer.
The smallest representable integer.
Sourceval shift_right_logical : int64 -> int -> int64 Shifts right, filling in with zeroes, which will not preserve the sign of the input.
Sourceval ceil_pow2 : int64 -> int64 ceil_pow2 x returns the smallest power of 2 that is greater than or equal to x. The implementation may only be called for x > 0. Example: ceil_pow2 17 = 32
Sourceval floor_pow2 : int64 -> int64 floor_pow2 x returns the largest power of 2 that is less than or equal to x. The implementation may only be called for x > 0. Example: floor_pow2 17 = 16
Sourceval ceil_log2 : int64 -> int ceil_log2 x returns the ceiling of log-base-2 of x, and raises if x <= 0.
Sourceval floor_log2 : int64 -> int floor_log2 x returns the floor of log-base-2 of x, and raises if x <= 0.
Sourceval is_pow2 : int64 -> bool is_pow2 x returns true iff x is a power of 2. is_pow2 raises if x <= 0.
Returns the number of leading zeros in the binary representation of the input, as an integer between 0 and one less than num_bits.
The results are unspecified for t = 0.
Returns the number of trailing zeros in the binary representation of the input, as an integer between 0 and one less than num_bits.
The results are unspecified for t = 0.
Conversion functions
Sourceval of_int : int -> int64 Sourceval of_int32 : int32 -> int64 Sourceval of_int64 : int64 -> int64 Sourceval to_int : int64 -> int option Sourceval to_int32 : int64 -> int32 option Sourceval of_nativeint : nativeint -> int64 Sourceval to_nativeint : int64 -> nativeint option Truncating conversions
These functions return the least-significant bits of the input. In cases where optional conversions return Some x, truncating conversions return x.
Sourceval to_int_trunc : int64 -> int Sourceval to_int32_trunc : int64 -> int32 Sourceval to_nativeint_trunc : int64 -> nativeint Low-level float conversions
Sourceval bits_of_float : float -> int64 bits_of_float will always allocate its result on the heap unless the _unboxed C function call is chosen by the compiler.
Sourceval float_of_bits : int64 -> float float_of_bits will always allocate its result on the heap unless the _unboxed C function call is chosen by the compiler.
Byte swap operations
See Int's byte swap section for a description of Base's approach to exposing byte swap primitives.
As of writing, these operations do not sign extend unnecessarily on 64 bit machines, unlike their int32 counterparts, and hence, are more performant. See the Int32 module for more details of the overhead entailed by the int32 byteswap functions.
Sourceval bswap16 : int64 -> int64 Sourceval bswap32 : int64 -> int64 Sourceval bswap48 : int64 -> int64 Sourceval bswap64 : int64 -> int64 Extensions
include Identifiable.S
with type t := int64
with type comparator_witness := comparator_witness
include Comparable.S_binable
with type t := int64
with type comparator_witness := comparator_witness
include Base.Comparable.S
with type t := int64
with type comparator_witness := comparator_witness
include Base.Comparisons.S with type t := int64
Sourceval equal : int64 -> int64 -> bool Sourceval compare : int64 -> int64 -> int compare t1 t2 returns 0 if t1 is equal to t2, a negative integer if t1 is less than t2, and a positive integer if t1 is greater than t2.
Sourceval min : int64 -> int64 -> int64 Sourceval max : int64 -> int64 -> int64 Sourceval ascending : int64 -> int64 -> int ascending is identical to compare. descending x y = ascending y x. These are intended to be mnemonic when used like List.sort ~compare:ascending and List.sort ~cmp:descending, since they cause the list to be sorted in ascending or descending order, respectively.
Sourceval descending : int64 -> int64 -> int Sourceval between : int64 -> low:int64 -> high:int64 -> bool between t ~low ~high means low <= t <= high
Sourceval clamp_exn : int64 -> min:int64 -> max:int64 -> int64 clamp_exn t ~min ~max returns t', the closest value to t such that between t' ~low:min ~high:max is true.
Raises if not (min <= max).
include Quickcheckable.S_int with type t := int64
include Quickcheck_intf.S_range with type t := int64
gen_incl lower_bound upper_bound produces values between lower_bound and upper_bound, inclusive. It uses an ad hoc distribution that stresses boundary conditions more often than a uniform distribution, while still able to produce any value in the range. Raises if lower_bound > upper_bound.
gen_uniform_incl lower_bound upper_bound produces a generator for values uniformly distributed between lower_bound and upper_bound, inclusive. Raises if lower_bound > upper_bound.
gen_log_uniform_incl lower_bound upper_bound produces a generator for values between lower_bound and upper_bound, inclusive, where the number of bits used to represent the value is uniformly distributed. Raises if (lower_bound < 0) || (lower_bound > upper_bound).
gen_log_incl lower_bound upper_bound is like gen_log_uniform_incl, but weighted slightly more in favor of generating lower_bound and upper_bound specifically.