uring 0.5 · OCaml Package

Io_uring interface.

module Region : sig ... end

Region handles carving up a block of external memory into smaller chunks. This is currently just a slab allocator of a fixed size, on the basis that most IO operations operate on predictable chunks of memory. Since the block of memory in a region is contiguous, it can be used in Uring's fixed buffer model to map it into kernel space for more efficient IO.

type 'a t

'a t is a reference to an Io_uring structure.

type 'a job

A handle for a submitted job, which can be used to cancel it. If an operation returns None, this means that submission failed because the ring is full.

val create : ?polling_timeout:int -> queue_depth:int -> unit -> 'a t

create ~queue_depth will return a fresh Io_uring structure t. Initially, t has no fixed buffer. Use set_fixed_buffer if you want one.

parameter polling_timeout
If given, use polling mode with the given idle timeout (in ms). This requires privileges.

val queue_depth : 'a t -> int

queue_depth t returns the total number of submission slots for the uring t

val exit : 'a t -> unit

exit t will shut down the uring t. Any subsequent requests will fail.

raises Invalid_argument
if there are any requests in progress

Fixed buffers

Each uring may have associated with it a fixed region of memory that is used for the "fixed buffer" mode of io_uring to avoid data copying between userspace and the kernel.

val set_fixed_buffer : 'a t -> Cstruct.buffer -> (unit, [> `ENOMEM ]) result

set_fixed_buffer t buf sets buf as the fixed buffer for t.

You will normally want to wrap this with Region.alloc or similar to divide the buffer into chunks.

If t already has a buffer set, the old one will be removed.

Returns `ENOMEM if insufficient kernel resources are available or the caller's RLIMIT_MEMLOCK resource limit would be exceeded.

raises Invalid_argument
if there are any requests in progress

val buf : 'a t -> Cstruct.buffer

buf t is the fixed internal memory buffer associated with uring t using set_fixed_buffer, or a zero-length buffer if none is set.

Queueing operations

val noop : 'a t -> 'a -> 'a job option

noop t d submits a no-op operation to uring t. The user data d will be returned by wait or peek upon completion.

Timeout

type clock =

| Boottime
| Realtime
(*
Represents Linux clocks. Boottime and Realtime represents OS clocks CLOCK_BOOTTIME and CLOCK_REALTIME respectively.
*)

val timeout : ?absolute:bool -> 'a t -> clock -> int64 -> 'a -> 'a job option

timeout t clock ns d submits a timeout request to uring t.

absolute denotes how clock and ns relate to one another. Default value is false

ns is the timeout time in nanoseconds

module type FLAGS = sig ... end

module Open_flags : sig ... end

Flags that can be passed to openat2.

module Resolve : sig ... end

Flags that can be passed to openat2 to control path resolution.

val openat2 : 
  'a t ->
  access:[ `R | `W | `RW ] ->
  flags:Open_flags.t ->
  perm:Unix.file_perm ->
  resolve:Resolve.t ->
  ?fd:Unix.file_descr ->
  string ->
  'a ->
  'a job option

openat2 t ~access ~flags ~perm ~resolve ~fd path d opens path, which is resolved relative to fd (or the current directory if fd is not given). The user data d will be returned by wait or peek upon completion.

parameter access
controls whether the file is opened for reading, writing, or both

parameter flags
are the usual open flags

parameter perm
sets the access control bits for newly created files (subject to the process's umask)

parameter resolve
controls how the pathname is resolved.

val unlink : 
  'a t ->
  dir:bool ->
  ?fd:Unix.file_descr ->
  string ->
  'a ->
  'a job option

unlink t ~dir ~fd path removes the directory entry path, which is resolved relative to fd. If fd is not given, then the current working directory is used. If path is a symlink, the link is removed, not the target.

parameter dir
If true, this acts like rmdir (only removing empty directories). If false, it acts like unlink (only removing non-directories).

module Poll_mask : sig ... end

val poll_add : 'a t -> Unix.file_descr -> Poll_mask.t -> 'a -> 'a job option

poll_add t fd mask d will submit a poll(2) request to uring t. It completes and returns d when an event in mask is ready on fd.

type offset := Optint.Int63.t

For files, give the absolute offset, or use Optint.Int63.minus_one for the current position. For sockets, use an offset of Optint.Int63.zero (minus_one is not allowed here).

val read : 
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  Cstruct.t ->
  'a ->
  'a job option

read t ~file_offset fd buf d will submit a read(2) request to uring t. It reads from absolute file_offset on the fd file descriptor and writes the results into the memory pointed to by buf. The user data d will be returned by wait or peek upon completion.

val write : 
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  Cstruct.t ->
  'a ->
  'a job option

write t ~file_offset fd buf d will submit a write(2) request to uring t. It writes to absolute file_offset on the fd file descriptor from the the memory pointed to by buf. The user data d will be returned by wait or peek upon completion.

val iov_max : int

The maximum length of the list that can be passed to readv and similar.

val readv : 
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  Cstruct.t list ->
  'a ->
  'a job option

readv t ~file_offset fd iov d will submit a readv(2) request to uring t. It reads from absolute file_offset on the fd file descriptor and writes the results into the memory pointed to by iov. The user data d will be returned by wait or peek upon completion.

Requires List.length iov <= Uring.iov_max

val writev : 
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  Cstruct.t list ->
  'a ->
  'a job option

writev t ~file_offset fd iov d will submit a writev(2) request to uring t. It writes to absolute file_offset on the fd file descriptor from the the memory pointed to by iov. The user data d will be returned by wait or peek upon completion.

Requires List.length iov <= Uring.iov_max

val read_fixed : 
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  off:int ->
  len:int ->
  'a ->
  'a job option

read t ~file_offset fd ~off ~len d will submit a read(2) request to uring t. It reads up to len bytes from absolute file_offset on the fd file descriptor and writes the results into the fixed memory buffer associated with uring t at offset off. The user data d will be returned by wait or peek upon completion.

val read_chunk : 
  ?len:int ->
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  Region.chunk ->
  'a ->
  'a job option

read_chunk is like read_fixed, but gets the offset from chunk.

parameter len
Restrict the read to the first len bytes of chunk.

val write_fixed : 
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  off:int ->
  len:int ->
  'a ->
  'a job option

write t ~file_offset fd off d will submit a write(2) request to uring t. It writes up to len bytes into absolute file_offset on the fd file descriptor from the fixed memory buffer associated with uring t at offset off. The user data d will be returned by wait or peek upon completion.

val write_chunk : 
  ?len:int ->
  'a t ->
  file_offset:offset ->
  Unix.file_descr ->
  Region.chunk ->
  'a ->
  'a job option

write_chunk is like write_fixed, but gets the offset from chunk.

parameter len
Restrict the write to the first len bytes of chunk.

val splice : 
  'a t ->
  src:Unix.file_descr ->
  dst:Unix.file_descr ->
  len:int ->
  'a ->
  'a job option

splice t ~src ~dst ~len d will submit a request to copy len bytes from src to dst. The operation returns the number of bytes transferred, or 0 for end-of-input. The result is EINVAL if the file descriptors don't support splicing.

val connect : 'a t -> Unix.file_descr -> Unix.sockaddr -> 'a -> 'a job option

connect t fd addr d will submit a request to connect fd to addr.

module Sockaddr : sig ... end

Holder for the peer's address in accept.

val accept : 'a t -> Unix.file_descr -> Sockaddr.t -> 'a -> 'a job option

accept t fd addr d will submit a request to accept a new connection on fd. The new FD will be configured with SOCK_CLOEXEC. The remote address will be stored in addr.

val close : 'a t -> Unix.file_descr -> 'a -> 'a job option

val cancel : 'a t -> 'a job -> 'a -> 'a job option

cancel t job d submits a request to cancel job. The cancel job itself returns 0 on success, or ENOTFOUND if job had already completed by the time the kernel processed the cancellation request.

raises Invalid_argument
if the job has already been returned by e.g. wait.

module Msghdr : sig ... end

val send_msg : 
  ?fds:Unix.file_descr list ->
  ?dst:Unix.sockaddr ->
  'a t ->
  Unix.file_descr ->
  Cstruct.t list ->
  'a ->
  'a job option

send_msg t fd buffs d will submit a sendmsg(2) request. The Msghdr will be constructed from the FDs (fds), address (dst) and buffers (buffs).

Requires List.length buffs <= Uring.iov_max

parameter dst
Destination address.

parameter fds
Extra file descriptors to attach to the message.

val recv_msg : 'a t -> Unix.file_descr -> Msghdr.t -> 'a -> 'a job option

recv_msg t fd msghdr d will submit a recvmsg(2) request. If the request is successful then the msghdr will contain the sender address and the data received.

Probing

You can check which operations are supported by the running kernel.

module Op : sig ... end

type probe

val get_probe : _ t -> probe

val op_supported : probe -> Op.t -> bool

Submitting operations

val submit : 'a t -> int

submit t will submit all the outstanding queued requests on uring t to the kernel. Their results can subsequently be retrieved using wait or peek.

type 'a completion_option =

| None
| Some of {
1. result : int;
2. data : 'a;
}

The type of results of calling wait and peek. None denotes that either there were no completions in the queue or an interrupt / timeout occurred. Some contains both the user data attached to the completed request and the integer syscall result.

val wait : ?timeout:float -> 'a t -> 'a completion_option

wait ?timeout t will block indefinitely (the default) or for timeout seconds for any outstanding events to complete on uring t. This calls submit automatically.

val get_cqe_nonblocking : 'a t -> 'a completion_option

get_cqe_nonblocking t returns the next completion entry from the uring t. It is like wait except that it returns None instead of blocking.

val peek : 'a t -> 'a completion_option

deprecated Renamed to Uring.get_cqe_nonblocking

val error_of_errno : int -> Unix.error

error_of_errno e converts the error code abs e to a Unix error type.

val active_ops : _ t -> int

active_ops t returns the number of operations added to the ring (whether submitted or not) for which the completion event has not yet been collected.

module Stats : sig ... end

val get_debug_stats : _ t -> Stats.t

get_debug_stats t collects some metrics about the internal state of t.

module Private : sig ... end

package uring

Fixed buffers

Queueing operations

Timeout

Probing

Submitting operations