package tls

v0.12.8 (2020-12-08)

• Re-add ECPointFormats hello extension (both client and server) to avoid handshake failures with Go's TLS stack (RFC 8422 makes it optional, but go (1.15.5) requires it) - reported by @jeffa5 at https://discuss.ocaml.org/t/strange-prohibited-tls-1-2-cipher-suite-9d-issue/ fix by @hannesm #424

v0.12.7 (2020-12-04)

• Tls.lwt: make the receive buffer connection-local to avoid potential data races (#422 by @dinosaure)

• Tls_mirage: remove unneeded type alias (@hannesm)

• Add Tls.Config.Ciphers.http2 - a list of ciphersuites allowed to be negotiated for HTTP2 sessions (#423 by @jeffa5)

v0.12.6 (2020-11-06)

• OCaml 4.12 support (#421 @kit-ty-kate)

v0.12.5 (2020-09-22)

• Rename length to v_length to be compatible with cstruct 6.0.0 (#419 @dinosaure)

v0.12.4 (2020-08-08)

• handshake_server13: demote group and cipher log level (#417 by @xguerin)

• tls_lwt: register printers for Tls_alert and Tls_failure (#418 by @hannesm)

v0.12.3 (2020-07-04)

• Adapt to new GCM and CCM API of mirage-crypto (#416 by @hannesm)

• Add support for ChaCha20/Poly1305 ciphersuite (#416 by @hannesm)

v0.12.2 (2020-06-20)

• tls_lwt again calls Mirage_crypto_rng_lwt.initialize () -- which is since mirage-crypto-rng 0.8 no longer inside the lwt monad, and safe to be called multiple times and on top level (#415 by @hannesm)

v0.12.1 (2020-06-12)

in #414 by @hannesm

• Drop support for RC4 ciphersuite

• Raise lower TLS version in default configuration to 1.2

• tls_lwt no longer calls Mirage_crypto_rng_unix.initialize -- this needs to be done in the application, inside Lwt_main.run: Mirage_crypto_rng_lwt.initialize () >>= fun () ->

• Support ECDHE ciphersuites in TLS 1.2 and below as specified in RFC 8422 (requested in #413 by @ryanakca, also in #362 by @orbitz @annubiz)

• drop "TLS_" prefix from ciphersuite constructors

• BUGFIX: TLS client (<= 1.2) assembling an empty Certificate message (noticed in #413, present since 0.12.0 release)

• Cleanup Packet.any_ciphersuite list (remove ARIA, CAMELLIA, KRB5, EXPORT)

• Adapt interoperability test scripts with TLS 1.3 support

v0.12.0 (2020-05-12)

in #405 by @hannesm

• TLS 1.3 support

• Tracing now uses the logs library (log source tls.tracing on debug level)

• bugfix for padding in ClientHello, which computed wrong length

• bugfix hs_fragments to be set before executing the protocol handling logic

• bugfix guard RSA signature with an Insufficient_key handler, which may occur when using an RSA key which size is too small for the used digest algorithm

v0.11.1 (2020-04-09)

• Adapt to X509.0.11.0 API changes (#412)

v0.11.0 (2020-03-12)

• use dune as build system (#407)

• BREAKING split into tls and tls-mirage opam packages (#407)

• BREAKING use mirage-crypto instead of nocrypto (#407)

v0.10.6 (2020-01-23)

• adapt to x509 0.9.0 interface: certificate revocation lists can now be passed to the authenticator in Tls_mirage and X509_lwt; also a list of hash algorithms to be used for certificate signature verification can be passed to the authenticator

• adapt to lwt 5.0.0

v0.10.5 (2019-11-01)

• adapt to mirage-flow 2.0.0, mirage-clock 3.0.0, mirage-kv 3.0.0 interfaces (#401 @hannesm)

0.10.4 (2019-08-15)

• tls_lwt: avoid double close by checking in the default close callback of Lwt_io.make whether the underlying file descriptor has been closed already. (reported and discussed by @hcarty in #395, merged #397)

0.10.3 (2019-07-26)

• support x509 0.7.0+

• remove dependency on Astring (was only used in the lwt-starttls example)

0.10.2 (2019-04-02)

• support for cstruct 4.0.0+

• remove support for < 4.04.2 (same as x509 in master)

• remove result (part of 4.03.0)

• enhance mirage/example2 to work on more platforms than unix

0.10.1 (2019-02-28)

• tls-mirage: fix compilation

0.10.0 (2019-02-28)

• tls: fix extensions length (used to include the 2 byte extension length field) if padding is inserted (introduced on May 5, 2014 in #73)

• tls-mirage: adapt to mirage-kv 2.0.0 API (#384, @samoht)

0.9.3 (2019-01-07)

• tls: do not require client sent ciphersuites to be a proper set (interoperability with some android devices)

• tls_lwt: delay error from writing to peer while reading, record errors only if state is active (fixes #347)

• migrate opam file to opam 2.0 format

0.9.2 (2018-08-24)

• compatibility with ppx_sexp_conv >v0.11.0 (#381), required for 4.07.0

• support ALPN (#378, @bobbypriambodo)

0.9.1 (2018-02-26)

• Tls_lwt: use Tls.Config instead of Config directly to avoid polluting imported names (#376, @rgrinberg)

0.9.0 (2017-12-23)

• renegotiation semantics (#375) allow acceptable_ca, authenticator, and own_cert to be updated (Config.with_x) semantics of reneg is blocking {Tls_lwt.Unix|Tls_mirage}.reneg ~drop:bool drops data of earlier epoch

• implement acceptable_ca (#332, @reynir)

• fix client renegotiation with ExtendedMasterSecret (#373, broken since 0.7.0)

• Config.client can get ~peer_name (#373)

• Asn.Time.t is Ptime.t now (asn1-combinators.0.2.0, x509.0.6.0, #372)

• cleanups (#360, #363, #369, @rgrinberg)

• remove 3DES CBC SHA from default ciphers (#359)

0.8.0 (2017-02-01)

• lwt: in Unix.client_of_fd the named argument host is now optional (#336)

• mirage: in client_of_flow the (positional) hostname argument is now optional (#336)

• mirage: adapt to PCLOCK interface (@mattgray #329 #331)

• build system migrated from oasis to topkg (#342)

• mirage: adapt to MirageOS3 (@yomimono @samoht #338 #349 #350 #351 #353)

• lwt: do not crash on double close (@vbmithr #345)

• fixed docstring typos (@mor1 #340)

0.7.1 (2016-03-21)

• remove camlp4 dependency (use cstruct ppx and sexplib ppx instead)

• sort client extensions, there are servers which dislike an extension without data at the end, thus try to send extensions with data at the end (#319)

• initial GCM support (#310)

• fix hs_can_handle_appdata (#315): Initially we allowed application data always after the first handshake.

  Turns out, between CCS and Finished there is new crypto_context in place which has not yet been authenticated -- bad idea to accept application data at that point (beginning of 2015 in OCaml TLS).

  The fix was to only allow application data in Established state (and block in Tls_lwt/Tls_mirage when the user requested renegotiation) (December 2015 in OCaml-TLS).

  Renegotiation was also turned off by default when we introduced resumption (mid October 2015): both features together (without mitigating via session hash) allow the triple handshake.

  It turns out, the server side can happily accept application data from the other side when it just sent a HelloRequest (and waits for the ClientHello; same is true for the client side, waiting for the ServerHello in renegotiation case might be interleaved with application data) to let the client initiate a new handshake. By this commit, OCaml-TLS allows application data then.

  In the end, it is a pretty academic thing anyways, since nobody uses renegotiation with OCaml-TLS in the field.

• during verification of a digitally signed: checked that the used hash algorithm is one of the configured ones (#313)

• unify return type of handshake and change cipher spec handler (#314)

• separate client and server extensions (#317)

• type equality (no longer generative error type), use result (#318)

• removed Printer (was barely useful)

0.7.0 (2015-12-04)

• session resumption (via session ID) support (#283) Config contains session_cache : SessionID.t -> epoch_data option and cached_session : epoch_data option

• session hash and extended master secret (RFC 7627) support (#287)

semantic changes

• disable renegotiation by default (#300)

• blocking semantics (both Mirage and Lwt) while renegotiating (#304)

• Engine.handshake_in_progress no longer exist

• Hex_fingerprint / Fingerprint authenticators no longer exist

• Mirage X509 does no longer prefix keys and trust anchors with "tls/" in the path

minor fixes

• fix concurrent read/write in tls_mirage (#303)

• expose own_random and peer_random in epoch_data (@cfcs, #297)

• public key pinning (X509_lwt) via Hex_key_fingerprint / Key_fingerprint (#301)

• certificate chain and peer certificate are exposed via epoch_data (new path-building X.509 interface)

0.6.0 (2015-07-02)

• API: dropped 'perfect' from forward secrecy in Config.Ciphers: fs instead of pfs, fs_of instead of pfs_of

• API: type epoch_data moved from Engine to Core

• removed Cstruct_s now that cstruct (since 1.6.0) provides s-expression marshalling

• require at least 1024 bit DH group, use FFDHE 2048 bit DH group by default instead of oakley2 (logjam)

• more specific alerts:

  • UNRECOGNIZED_NAME: if hostname in SNI does not match

  • UNSUPPORTED_EXTENSION: if server hello has an extension not present in client hello

  • ILLEGAL_PARAMETER: if a parse error occured

• encrypt outgoing alerts

• fix off-by-one in handling empty TLS records: if a record is less than 5 bytes, treat as a fragment. exactly 5 bytes might already be a valid application data frame

0.5.0 (2015-05-02)

• updates to extension enum (contributed by Dave Garrett #264)

• removed entropy feeding (done by nocrypto) #265

• Tls_lwt file descriptor lifecycle: not eagerly close file descriptors #266

0.4.0 (2015-03-19)

• client authentication (both client and server side)

• server side SNI configuration (see sni.md)

• SCSV server-side downgrade prevention (by Gabriel de Perthuis @g2p #5)

• remove RC4 ciphers from default config #8

• support for AEAD ciphers, currently CCM #191

• proper bounds checking of handshake fragments #255

• disable application data between CCS and Finished #237

• remove secure renegotiation configuration option #256

• expose epoch in mirage interface, implement 2.3.0 API (error_message)

• error reporting (type failure in engine.mli) #246

• hook into Lwt event loop to feed RNG #254

0.3.0 (2014-12-21)

• X509_lwt provides Fingerprints and Hex_fingerprints constructor for checking fingerprints of certificates instead of trusting trust anchors #206 #207

• client configuration requires an authenticator #202

• server certificate must be at least Config.min_rsa_key_size bits

• expose epoch via lwt interface #208

• mirage-2.2.0 compatibility #212

• cleanups of mirage interface #213

• nocrypto-0.3.0 compatibility #194 #209 #210

0.2.0 (2014-10-30)

• distinguish between supported hash and mac algorithms (using Nocrypto.Hash) and those which may occur on the wire #189

• expose trust anchor when authenticating certificate (requires x509 >=0.2) #178

• information about the active session is exposed via epoch : state -> epoch

• distinguish between supported ciphersuites (type ciphersuite) and known ciphersuites (type any_ciphersuite) #173

• distinguish between supported versions by the stack (type tls_version) and readable versions (tls_any_version), which might occur in a tls record or client_hello read from the network #179 #172

• support > TLS-1.2 client hellos (as reported by ssllabs.com #161)

• support iOS 6 devices (who propose NULL ciphers - reported in #160)

• send minimal protocol version in record layer of client hello (maximum version is in the client hello itself) (RFC5246, E.1) #165

0.1.0 (2014-07-08)

• initial beta release