package tcpip

You can search for identifiers within the package.

in-package search v0.2.0

On This Page

Parameters
Signature

package tcpip

tcpip
- Tcpip_checksum
tcpip.arpv4
- Arpv4
  - Make
    
    Ethif
    
    Time
- Arpv4_packet
  - Marshal
  - Unmarshal
- Arpv4_wire
tcpip.ethif
- Ethif
  - Make
- Ethif_packet
  - Marshal
  - Unmarshal
- Ethif_wire
tcpip.icmpv4
- Icmpv4
  - Make
    
    I
- Icmpv4_packet
  - Marshal
  - Unmarshal
- Icmpv4_wire
tcpip.icmpv4-socket
- Icmpv4_socket
tcpip.ipv4
- Ipv4_packet
  - Marshal
  - Unmarshal
- Ipv4_wire
- Static_ipv4
  - Make
    
    A
    
    N
tcpip.ipv6
- Ipv6
  - Make
    
    E
    
    T
- Ipv6_wire
- Ndpv6
tcpip.stack-direct
- Tcpip_stack_direct
  - Make
    
    Arpv4
    
    Ethif
    
    Icmpv4
    
    Ipv4
    
    Tcpv4
    
    Time
    
    Udpv4
  - TCPV4_DIRECT
  - UDPV4_DIRECT
tcpip.stack-socket
tcpip.tcp
- Tcp
tcpip.tcpv4-socket
- Tcpv4_socket
tcpip.tcpv6-socket
- Tcpv6_socket
tcpip.udp
- Udp
  - Make
    
    IP
- Udp_packet
  - Marshal
  - Unmarshal
- Udp_wire
tcpip.udpv4-socket
- Udpv4_socket
tcpip.udpv6-socket
- Udpv6_socket

Legend:
Library
Module
Module type
Parameter
Class
Class type

Parameters

module N : Mirage_net_lwt.S

Signature

include Mirage_protocols_lwt.ETHIF with type netif = N.t

type error = private [>

| Mirage_protocols.Ethif.error

]

The type for ethernet interface errors.

val pp_error : error Fmt.t

pp_error is the pretty-printer for errors.

type buffer = Cstruct.t

The type for memory buffers.

type netif = N.t

The type for ethernet network interfaces.

type macaddr = Macaddr.t

The type for unique MAC identifiers.

include Mirage_device.S with type 'a io = 'a Lwt.t

type 'a io = 'a Lwt.t

type t

val disconnect : t -> unit io

val write : t -> buffer -> (unit, error) Pervasives.result io

write nf buf outputs buf to netfront nf.

val writev : t -> buffer list -> (unit, error) Pervasives.result io

writev nf bufs output a list of buffers to netfront nf as a single packet.

val mac : t -> macaddr

mac nf is the MAC address of nf.

val mtu : t -> int

mtu nf is the Maximum Transmission Unit of the nf i.e. the maximum size of the payload, not including the ethernet frame header.

val input : 
  arpv4:(buffer -> unit io) ->
  ipv4:(buffer -> unit io) ->
  ipv6:(buffer -> unit io) ->
  t ->
  buffer ->
  unit io

listen nf fn is a blocking operation that calls fn buf with every packet that is read from the interface. The function can be stopped by calling disconnect in the device layer.

val connect : ?mtu:int -> netif -> t Lwt.t

connect ?mtu netif connects an ethernet layer on top of the raw network device netif. The Maximum Transfer Unit may be set via the optional ?mtu parameter, otherwise a default value of 1500 will be used.