On This Page
package stog_rdf
stog_rdf 0.20.0
Error log
The package failed to build. The error log from opam follows.
[NOTE] Package dune is already installed (current version is 3.17.2).
[NOTE] Package ocamlfind is already installed (current version is 1.9.8).
The following actions will be performed:
=== install 62 packages
- install angstrom 0.16.1
- install base-bytes base
- install bigstringaf 0.10.0
- install conf-gmp 4
- install conf-gmp-powm-sec 3
- install conf-libpcre 2
- install conf-pkg-config 4
- install conf-zlib 1
- install cppo 1.8.0
- install cryptokit 1.20
- install csexp 1.5.2
- install dune-build-info 3.17.2
- install dune-configurator 3.17.2
- install dune-private-libs 3.17.2
- install dune-site 3.17.2
- install dyn 3.17.2
- install fmt 0.9.0
- install gen 1.1
- install higlo 0.8
- install iri 1.0.0
- install jsonm 1.0.2
- install logs 0.7.0
- install lwt 5.9.0
- install lwt_ppx 5.8.0
- install menhir 20240715
- install menhirCST 20240715
- install menhirLib 20240715
- install menhirSdk 20240715
- install ocaml-compiler-libs v0.12.4
- install ocaml-syntax-shims 1.0.0
- install ocamlbuild 0.15.0
- install ocf 0.9.0
- install ocf_ppx 0.9.0
- install ocplib-endian 1.2
- install ordering 3.17.2
- install pcre 8.0.2
- install pp 2.0.0
- install ppx_blob 0.9.0
- install ppx_derivers 1.2.1
- install ppxlib 0.35.0
- install ptime 1.2.0
- install rdf 0.15.0
- install re 1.12.0
- install sedlex 3.3
- install seq base
- install sexplib0 v0.16.0
- install stdlib-shims 0.3.0
- install stdune 3.17.2
- install stog 0.20.0
- install stog_rdf 0.20.0
- install stringext 1.6.0
- install topkg 1.0.7
- install uri 4.4.0
- install uucp 15.0.0
- install uuidm 0.9.8
- install uunf 15.0.0
- install uutf 1.0.3
- install xmlm 1.4.0
- install xtmpl 0.19.0
- install xtmpl_ppx 0.19.0
- install yojson 2.2.2
- install zarith 1.14
The following system packages will first need to be installed:
libgmp-dev libpcre3-dev pkg-config zlib1g-dev
<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>
opam believes some required external dependencies are missing. opam can:
> 1. Run apt-get to install them (may need root/sudo access)
2. Display the recommended apt-get command and wait while you run it manually (e.g. in another terminal)
3. Continue anyway, and, upon success, permanently register that this external dependency is present, but not detectable
4. Abort the installation
[1/2/3/4] 1
+ /usr/bin/sudo "apt-get" "install" "-qq" "-yy" "libgmp-dev" "libpcre3-dev" "pkg-config" "zlib1g-dev"
- debconf: delaying package configuration, since apt-utils is not installed
- Selecting previously unselected package libgmpxx4ldbl:amd64.
- (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18745 files and directories currently installed.)
- Preparing to unpack .../00-libgmpxx4ldbl_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
- Unpacking libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
- Selecting previously unselected package libgmp-dev:amd64.
- Preparing to unpack .../01-libgmp-dev_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
- Unpacking libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
- Selecting previously unselected package libpcre16-3:amd64.
- Preparing to unpack .../02-libpcre16-3_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre16-3:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcre3:amd64.
- Preparing to unpack .../03-libpcre3_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre3:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcre32-3:amd64.
- Preparing to unpack .../04-libpcre32-3_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre32-3:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcrecpp0v5:amd64.
- Preparing to unpack .../05-libpcrecpp0v5_2%3a8.39-15_amd64.deb ...
- Unpacking libpcrecpp0v5:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcre3-dev:amd64.
- Preparing to unpack .../06-libpcre3-dev_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre3-dev:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpkgconf3:amd64.
- Preparing to unpack .../07-libpkgconf3_1.8.1-1_amd64.deb ...
- Unpacking libpkgconf3:amd64 (1.8.1-1) ...
- Selecting previously unselected package pkgconf-bin.
- Preparing to unpack .../08-pkgconf-bin_1.8.1-1_amd64.deb ...
- Unpacking pkgconf-bin (1.8.1-1) ...
- Selecting previously unselected package pkgconf:amd64.
- Preparing to unpack .../09-pkgconf_1.8.1-1_amd64.deb ...
- Unpacking pkgconf:amd64 (1.8.1-1) ...
- Selecting previously unselected package pkg-config:amd64.
- Preparing to unpack .../10-pkg-config_1.8.1-1_amd64.deb ...
- Unpacking pkg-config:amd64 (1.8.1-1) ...
- Selecting previously unselected package zlib1g-dev:amd64.
- Preparing to unpack .../11-zlib1g-dev_1%3a1.2.13.dfsg-1_amd64.deb ...
- Unpacking zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
- Setting up libpcre16-3:amd64 (2:8.39-15) ...
- Setting up libpcre3:amd64 (2:8.39-15) ...
- Setting up libpkgconf3:amd64 (1.8.1-1) ...
- Setting up libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
- Setting up libpcre32-3:amd64 (2:8.39-15) ...
- Setting up pkgconf-bin (1.8.1-1) ...
- Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
- Setting up libpcrecpp0v5:amd64 (2:8.39-15) ...
- Setting up libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
- Setting up libpcre3-dev:amd64 (2:8.39-15) ...
- Setting up pkgconf:amd64 (1.8.1-1) ...
- Setting up pkg-config:amd64 (1.8.1-1) ...
- Processing triggers for libc-bin (2.36-9+deb12u9) ...
<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> retrieved conf-gmp.4 (cached)
-> retrieved conf-gmp-powm-sec.3 (cached)
-> installed base-bytes.base
-> retrieved bigstringaf.0.10.0 (cached)
-> retrieved cppo.1.8.0 (cached)
-> retrieved angstrom.0.16.1 (cached)
-> installed conf-gmp.4
-> installed conf-pkg-config.4
-> retrieved cryptokit.1.20 (cached)
-> retrieved csexp.1.5.2 (cached)
-> installed conf-libpcre.2
-> installed conf-gmp-powm-sec.3
-> installed conf-zlib.1
-> retrieved fmt.0.9.0 (cached)
-> retrieved gen.1.1 (cached)
-> retrieved higlo.0.8 (cached)
-> retrieved iri.1.0.0 (cached)
-> retrieved jsonm.1.0.2 (cached)
-> retrieved logs.0.7.0 (cached)
-> retrieved lwt.5.9.0 (cached)
-> retrieved lwt_ppx.5.8.0 (cached)
-> retrieved menhir.20240715, menhirCST.20240715, menhirLib.20240715, menhirSdk.20240715 (cached)
-> installed cppo.1.8.0
-> retrieved dune-build-info.3.17.2, dune-configurator.3.17.2, dune-private-libs.3.17.2, dune-site.3.17.2, dyn.3.17.2, ordering.3.17.2, stdune.3.17.2 (cached)
-> installed csexp.1.5.2
-> retrieved ocaml-compiler-libs.v0.12.4 (cached)
-> retrieved ocaml-syntax-shims.1.0.0 (cached)
-> installed menhirCST.20240715
-> installed menhirLib.20240715
-> installed menhirSdk.20240715
-> retrieved ocamlbuild.0.15.0 (cached)
-> retrieved ocf.0.9.0, ocf_ppx.0.9.0 (cached)
-> retrieved ocplib-endian.1.2 (cached)
-> retrieved pcre.8.0.2 (cached)
-> retrieved pp.2.0.0 (cached)
-> retrieved ppx_blob.0.9.0 (cached)
-> retrieved ppx_derivers.1.2.1 (cached)
-> retrieved ppxlib.0.35.0 (cached)
-> installed pp.2.0.0
-> retrieved ptime.1.2.0 (cached)
-> installed ppx_derivers.1.2.1
-> retrieved re.1.12.0 (cached)
-> retrieved seq.base (cached)
-> installed seq.base
-> installed ocplib-endian.1.2
-> retrieved sedlex.3.3 (cached)
-> retrieved sexplib0.v0.16.0 (cached)
-> retrieved stdlib-shims.0.3.0 (cached)
-> retrieved stringext.1.6.0 (cached)
-> retrieved stog.0.20.0, stog_rdf.0.20.0 (cached)
-> installed ocaml-compiler-libs.v0.12.4
-> installed ocaml-syntax-shims.1.0.0
-> installed dune-build-info.3.17.2
-> installed ordering.3.17.2
-> installed dune-configurator.3.17.2
-> retrieved rdf.0.15.0 (cached)
-> installed gen.1.1
-> installed re.1.12.0
-> installed sexplib0.v0.16.0
-> installed stdlib-shims.0.3.0
-> retrieved topkg.1.0.7 (cached)
-> installed stringext.1.6.0
-> retrieved uri.4.4.0 (cached)
-> installed bigstringaf.0.10.0
-> retrieved uucp.15.0.0 (cached)
-> installed pcre.8.0.2
-> retrieved uuidm.0.9.8 (cached)
-> retrieved uunf.15.0.0 (cached)
-> retrieved uutf.1.0.3 (cached)
-> retrieved xmlm.1.4.0 (cached)
-> retrieved xtmpl.0.19.0, xtmpl_ppx.0.19.0 (cached)
-> retrieved zarith.1.14 (cached)
-> retrieved yojson.2.2.2 (cached)
-> installed angstrom.0.16.1
-> installed dyn.3.17.2
-> installed ocamlbuild.0.15.0
-> installed lwt.5.9.0
-> installed yojson.2.2.2
-> installed uri.4.4.0
-> installed zarith.1.14
-> installed ocf.0.9.0
-> installed stdune.3.17.2
-> installed topkg.1.0.7
-> installed cryptokit.1.20
-> installed uuidm.0.9.8
-> installed uutf.1.0.3
-> installed fmt.0.9.0
-> installed xmlm.1.4.0
-> installed ptime.1.2.0
-> installed dune-private-libs.3.17.2
-> installed jsonm.1.0.2
-> installed logs.0.7.0
-> installed menhir.20240715
-> installed dune-site.3.17.2
-> installed ppxlib.0.35.0
-> installed uunf.15.0.0
-> installed ppx_blob.0.9.0
-> installed lwt_ppx.5.8.0
-> installed ocf_ppx.0.9.0
-> installed sedlex.3.3
-> installed iri.1.0.0
-> installed xtmpl.0.19.0
-> installed higlo.0.8
-> installed xtmpl_ppx.0.19.0
-> installed stog.0.20.0
-> installed uucp.15.0.0
-> installed rdf.0.15.0
[ERROR] The compilation of stog_rdf.0.20.0 failed at "dune build -p stog_rdf -j 255 --promote-install-files=false @install".
#=== ERROR while compiling stog_rdf.0.20.0 ====================================#
# context 2.3.0 | linux/x86_64 | ocaml-base-compiler.4.12.1 | file:///src
# path ~/.opam/4.12/.opam-switch/build/stog_rdf.0.20.0
# command ~/.opam/4.12/bin/dune build -p stog_rdf -j 255 --promote-install-files=false @install
# exit-code 1
# env-file ~/.opam/log/stog_rdf-113-d1fac6.env
# output-file ~/.opam/log/stog_rdf-113-d1fac6.out
### output ###
# (cd _build/default && /home/opam/.opam/4.12/bin/ocamlc.opt -g -w -40 -bin-annot -w -6-7-9-10-27-32-33-34-35-36-50-52 -no-strict-sequence -linkall -g -bin-annot -I plugins/.stog_rdf.objs/byte -I /home/opam/.opam/4.12/lib/angstrom -I /home/opam/.opam/4.12/lib/bigstringaf -I /home/opam/.opam/4.12/lib/bytes -I /home/opam/.opam/4.12/lib/dune-build-info -I /home/opam/.opam/4.12/lib/dune-private-libs/dune-section -I /home/opam/.opam/4.12/lib/dune-site -I /home/opam/.opam/4.12/lib/dune-site/private -I /home/opam/.opam/4.12/lib/fmt -I /home/opam/.opam/4.12/lib/gen -I /home/opam/.opam/4.12/lib/higlo -I /home/opam/.opam/4.12/lib/iri -I /home/opam/.opam/4.12/lib/logs -I /home/opam/.opam/4.12/lib/lwt -I /home/opam/.opam/4.12/lib/lwt/unix -I /home/opam/.opam/4.12/lib/menhirLib -I /home/opam/.opam/4.12/lib/ocaml/compiler-libs -I /home/opam/.opam/4.12/lib/ocaml/threads -I /home/opam/.opam/4.12/lib/ocf -I /home/opam/.opam/4.12/lib/ocplib-endian -I /home/opam/.opam/4.12/lib/ocplib-endian/bigstring -I /home/opam/.opam/4.12/lib/pcre -I /home/opam/.opam/4.12/lib/ptime -I /home/opam/.opam/4.12/lib/rdf -I /home/opam/.opam/4.12/lib/re -I /home/opam/.opam/4.12/lib/re/str -I /home/opam/.opam/4.12/lib/sedlex -I /home/opam/.opam/4.12/lib/seq -I /home/opam/.opam/4.12/lib/stog -I /home/opam/.opam/4.12/lib/stog/base -I /home/opam/.opam/4.12/lib/stringext -I /home/opam/.opam/4.12/lib/uri -I /home/opam/.opam/4.12/lib/uucp -I /home/opam/.opam/4.12/lib/uuidm -I /home/opam/.opam/4.12/lib/uunf -I /home/opam/.opam/4.12/lib/uunf/string -I /home/opam/.opam/4.12/lib/uutf -I /home/opam/.opam/4.12/lib/xmlm -I /home/opam/.opam/4.12/lib/xtmpl -I /home/opam/.opam/4.12/lib/yojson -no-alias-deps -o plugins/.stog_rdf.objs/byte/stog_rdf.cmo -c -impl plugins/stog_rdf.pp.ml)
# File "plugins/stog_rdf.ml", line 353, characters 33-38:
# 353 | let d = Ds.simple_dataset ~named g in
# ^^^^^
# Error: This expression has type (Iri.t * Rdf.Graph.graph) list
# but an expression was expected of type
# (Rdf.Ds.name * Rdf.Graph.graph) list
# Type Iri.t is not compatible with type
# Rdf.Ds.name = [ `B of Rdf.Term.blank_id | `I of Iri.t ]
<><> Error report <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
+- The following actions failed
| - build stog_rdf 0.20.0
+-
+- The following changes have been performed
| - install angstrom 0.16.1
| - install base-bytes base
| - install bigstringaf 0.10.0
| - install conf-gmp 4
| - install conf-gmp-powm-sec 3
| - install conf-libpcre 2
| - install conf-pkg-config 4
| - install conf-zlib 1
| - install cppo 1.8.0
| - install cryptokit 1.20
| - install csexp 1.5.2
| - install dune-build-info 3.17.2
| - install dune-configurator 3.17.2
| - install dune-private-libs 3.17.2
| - install dune-site 3.17.2
| - install dyn 3.17.2
| - install fmt 0.9.0
| - install gen 1.1
| - install higlo 0.8
| - install iri 1.0.0
| - install jsonm 1.0.2
| - install logs 0.7.0
| - install lwt 5.9.0
| - install lwt_ppx 5.8.0
| - install menhir 20240715
| - install menhirCST 20240715
| - install menhirLib 20240715
| - install menhirSdk 20240715
| - install ocaml-compiler-libs v0.12.4
| - install ocaml-syntax-shims 1.0.0
| - install ocamlbuild 0.15.0
| - install ocf 0.9.0
| - install ocf_ppx 0.9.0
| - install ocplib-endian 1.2
| - install ordering 3.17.2
| - install pcre 8.0.2
| - install pp 2.0.0
| - install ppx_blob 0.9.0
| - install ppx_derivers 1.2.1
| - install ppxlib 0.35.0
| - install ptime 1.2.0
| - install rdf 0.15.0
| - install re 1.12.0
| - install sedlex 3.3
| - install seq base
| - install sexplib0 v0.16.0
| - install stdlib-shims 0.3.0
| - install stdune 3.17.2
| - install stog 0.20.0
| - install stringext 1.6.0
| - install topkg 1.0.7
| - install uri 4.4.0
| - install uucp 15.0.0
| - install uuidm 0.9.8
| - install uunf 15.0.0
| - install uutf 1.0.3
| - install xmlm 1.4.0
| - install xtmpl 0.19.0
| - install xtmpl_ppx 0.19.0
| - install yojson 2.2.2
| - install zarith 1.14
+-
# To update the current shell environment, run: eval $(opam env)
The former state can be restored with:
/usr/bin/opam switch import "/home/opam/.opam/4.12/.opam-switch/backup/state-20250206022150.export"
On This Page