mirage-net-solo5 0.4.0

Error log

The package failed to build. The error log from opam follows.

[NOTE] Package dune is already installed (current version is 3.17.2).
[NOTE] Package ocamlfind is already installed (current version is 1.9.8).
The following actions will be performed:
=== install 36 packages
  - install astring             0.8.5
  - install base                v0.14.3
  - install base-bytes          base
  - install conf-pkg-config     2
  - install cppo                1.8.0
  - install csexp               1.5.2
  - install cstruct             6.2.0
  - install dune-configurator   3.17.2
  - install fmt                 0.9.0
  - install io-page             3.0.0
  - install ipaddr              2.9.0
  - install jbuilder            1.0+beta20.2 (deprecated)
  - install logs                0.7.0
  - install lwt                 5.9.0
  - install mirage-device       1.2.0 (deprecated)
  - install mirage-net          1.2.0
  - install mirage-net-lwt      1.1.0 (deprecated)
  - install mirage-net-solo5    0.4.0
  - install mirage-solo5        0.5.0
  - install num                 1.5-1
  - install ocaml-compiler-libs v0.12.4
  - install ocaml-freestanding  0.6.7 (deprecated)        [required by io-page, mirage-solo5]
  - install ocaml-src           4.09.1-1                  [required by ocaml-freestanding]
  - install ocamlbuild          0.15.0
  - install ocb-stubblr         0.1.1-1
  - install ocplib-endian       1.2
  - install parsexp             v0.14.2
  - install ppx_derivers        1.2.1
  - install ppx_sexp_conv       v0.14.3
  - install ppxlib              0.25.1
  - install result              1.5
  - install sexplib             v0.14.0
  - install sexplib0            v0.14.0
  - install solo5-bindings-hvt  0.4.1 (deprecated)
  - install stdlib-shims        0.3.0
  - install topkg               1.0.7

The following system packages will first need to be installed:
    pkg-config

<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>

opam believes some required external dependencies are missing. opam can:
> 1. Run apt-get to install them (may need root/sudo access)
  2. Display the recommended apt-get command and wait while you run it manually (e.g. in another terminal)
  3. Continue anyway, and, upon success, permanently register that this external dependency is present, but not detectable
  4. Abort the installation

[1/2/3/4] 1

+ /usr/bin/sudo "apt-get" "install" "-qq" "-yy" "pkg-config"
- debconf: delaying package configuration, since apt-utils is not installed
- Selecting previously unselected package libpkgconf3:amd64.
- (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18745 files and directories currently installed.)
- Preparing to unpack .../libpkgconf3_1.8.1-1_amd64.deb ...
- Unpacking libpkgconf3:amd64 (1.8.1-1) ...
- Selecting previously unselected package pkgconf-bin.
- Preparing to unpack .../pkgconf-bin_1.8.1-1_amd64.deb ...
- Unpacking pkgconf-bin (1.8.1-1) ...
- Selecting previously unselected package pkgconf:amd64.
- Preparing to unpack .../pkgconf_1.8.1-1_amd64.deb ...
- Unpacking pkgconf:amd64 (1.8.1-1) ...
- Selecting previously unselected package pkg-config:amd64.
- Preparing to unpack .../pkg-config_1.8.1-1_amd64.deb ...
- Unpacking pkg-config:amd64 (1.8.1-1) ...
- Setting up libpkgconf3:amd64 (1.8.1-1) ...
- Setting up pkgconf-bin (1.8.1-1) ...
- Setting up pkgconf:amd64 (1.8.1-1) ...
- Setting up pkg-config:amd64 (1.8.1-1) ...
- Processing triggers for libc-bin (2.36-9+deb12u9) ...

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> installed base-bytes.base
-> retrieved astring.0.8.5  (cached)
-> retrieved base.v0.14.3  (cached)
-> retrieved cppo.1.8.0  (cached)
-> installed conf-pkg-config.2
-> retrieved csexp.1.5.2  (cached)
-> retrieved cstruct.6.2.0  (cached)
-> retrieved fmt.0.9.0  (cached)
-> retrieved io-page.3.0.0  (cached)
-> retrieved ipaddr.2.9.0  (cached)
-> retrieved logs.0.7.0  (cached)
-> retrieved lwt.5.9.0  (cached)
-> retrieved jbuilder.1.0+beta20.2  (cached)
-> installed csexp.1.5.2
-> retrieved mirage-device.1.2.0  (cached)
-> retrieved mirage-net.1.2.0  (cached)
-> retrieved mirage-net-lwt.1.1.0  (cached)
-> retrieved dune-configurator.3.17.2  (cached)
-> installed cppo.1.8.0
-> retrieved mirage-solo5.0.5.0  (cached)
-> retrieved num.1.5-1  (cached)
-> retrieved mirage-net-solo5.0.4.0  (https://github.com/mirage/mirage-net-solo5/releases/download/v0.4.0/mirage-net-solo5-0.4.0.tbz)
-> retrieved ocaml-compiler-libs.v0.12.4  (cached)
-> retrieved ocaml-freestanding.0.6.7  (cached)
-> retrieved ocamlbuild.0.15.0  (cached)
-> retrieved ocaml-src.4.09.1-1  (cached)
-> installed ocaml-compiler-libs.v0.12.4
-> retrieved ocb-stubblr.0.1.1-1  (cached)
-> installed num.1.5-1
-> retrieved ocplib-endian.1.2  (cached)
-> retrieved parsexp.v0.14.2  (cached)
-> retrieved ppx_derivers.1.2.1  (cached)
-> retrieved ppx_sexp_conv.v0.14.3  (cached)
-> retrieved result.1.5  (cached)
-> retrieved sexplib.v0.14.0  (cached)
-> retrieved ppxlib.0.25.1  (cached)
-> retrieved sexplib0.v0.14.0  (cached)
-> retrieved solo5-bindings-hvt.0.4.1  (cached)
-> installed ocaml-src.4.09.1-1
-> installed dune-configurator.3.17.2
-> installed ppx_derivers.1.2.1
-> installed ocplib-endian.1.2
-> installed result.1.5
-> retrieved stdlib-shims.0.3.0  (cached)
-> retrieved topkg.1.0.7  (cached)
-> installed sexplib0.v0.14.0
[ERROR] The compilation of solo5-bindings-hvt.0.4.1 failed at "make hvt".
-> installed stdlib-shims.0.3.0
-> installed lwt.5.9.0
-> installed ocamlbuild.0.15.0
-> installed jbuilder.1.0+beta20.2
-> installed base.v0.14.3
-> installed parsexp.v0.14.2
-> installed topkg.1.0.7
-> installed sexplib.v0.14.0
-> installed fmt.0.9.0
-> installed mirage-device.1.2.0
-> installed mirage-net.1.2.0
-> installed astring.0.8.5
-> installed cstruct.6.2.0
-> installed ocb-stubblr.0.1.1-1
-> installed logs.0.7.0
-> installed ppxlib.0.25.1
-> installed ppx_sexp_conv.v0.14.3
-> installed ipaddr.2.9.0

#=== ERROR while compiling solo5-bindings-hvt.0.4.1 ===========================#
# context              2.3.0 | linux/x86_64 | ocaml-base-compiler.4.09.1 | file:///src
# path                 ~/.opam/4.09/.opam-switch/build/solo5-bindings-hvt.0.4.1
# command              /usr/bin/make hvt
# exit-code            2
# env-file             ~/.opam/log/solo5-bindings-hvt-113-444061.env
# output-file          ~/.opam/log/solo5-bindings-hvt-113-444061.out
### output ###
# ./configure.sh
# ./configure.sh: Only 'gcc' 4.x+ is supported on Linux
# Makefile.common:22: /home/opam/.opam/4.09/.opam-switch/build/solo5-bindings-hvt.0.4.1/Makeconf: No such file or directory
# make: *** [GNUmakefile:21: /home/opam/.opam/4.09/.opam-switch/build/solo5-bindings-hvt.0.4.1/Makeconf] Error 1



<><> Error report <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
+- The following actions failed
| - build solo5-bindings-hvt 0.4.1
+- 
+- The following changes have been performed (the rest was aborted)
| - install astring             0.8.5
| - install base                v0.14.3
| - install base-bytes          base
| - install conf-pkg-config     2
| - install cppo                1.8.0
| - install csexp               1.5.2
| - install cstruct             6.2.0
| - install dune-configurator   3.17.2
| - install fmt                 0.9.0
| - install ipaddr              2.9.0
| - install jbuilder            1.0+beta20.2
| - install logs                0.7.0
| - install lwt                 5.9.0
| - install mirage-device       1.2.0
| - install mirage-net          1.2.0
| - install num                 1.5-1
| - install ocaml-compiler-libs v0.12.4
| - install ocaml-src           4.09.1-1
| - install ocamlbuild          0.15.0
| - install ocb-stubblr         0.1.1-1
| - install ocplib-endian       1.2
| - install parsexp             v0.14.2
| - install ppx_derivers        1.2.1
| - install ppx_sexp_conv       v0.14.3
| - install ppxlib              0.25.1
| - install result              1.5
| - install sexplib             v0.14.0
| - install sexplib0            v0.14.0
| - install stdlib-shims        0.3.0
| - install topkg               1.0.7
+- 

<><> mirage-device.1.2.0 installed successfully <><><><><><><><><><><><><><><><>
=> Note: This package is deprecated.
=> mirage-device is deprecated

<><> jbuilder.1.0+beta20.2 installed successfully <><><><><><><><><><><><><><><>
=> Note: This package is deprecated.

<><> solo5-bindings-hvt.0.4.1 troubleshooting <><><><><><><><><><><><><><><><><>
=> Note: This package is deprecated.
# To update the current shell environment, run: eval $(opam env)

The former state can be restored with:
    /usr/bin/opam switch import "/home/opam/.opam/4.09/.opam-switch/backup/state-20250206030917.export"