package mirage-dns
Library
Module
Module type
Parameter
Class
Class type
The type for TCP errors.
The type for TCP write errors.
type buffer = bufferThe type for memory buffers.
type ip = ipv4The type for IPv4 stacks for this stack to connect to.
type ipaddr = ipv4addrThe type for IP address representations.
The type for input function continuation to pass onto the underlying IP stack. This will normally be a NOOP for a conventional kernel, but a direct implementation will parse the buffer.
include Mirage_flow.S
with type 'a io := 'a io
and type buffer := buffer
and type flow := flow
and type error := error
and type write_error := write_error
val pp_write_error : write_error Fmt.tpp_write_error is the pretty-printer for write errors.
val read : flow -> (buffer Mirage_flow.or_eof, error) Pervasives.result ioread flow blocks until some data is available and returns a fresh buffer containing it.
The returned buffer will be of a size convenient to the flow implementation, but will always have at least 1 byte.
If the remote endpoint calls close then calls to read will keep returning data until all the in-flight data has been read. read flow will return `Eof when the remote endpoint has called close and when there is no more in-flight data.
val write : flow -> buffer -> (unit, write_error) Pervasives.result iowrite flow buffer writes a buffer to the flow. There is no indication when the buffer has actually been read and, therefore, it must not be reused. The contents may be transmitted in separate packets, depending on the underlying transport. The result Ok () indicates success, Error `Closed indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.
val writev : flow -> buffer list -> (unit, write_error) Pervasives.result iowritev flow buffers writes a sequence of buffers to the flow. There is no indication when the buffers have actually been read and, therefore, they must not be reused. The result Ok () indicates success, Error `Closed indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.
close flow flushes all pending writes and signals the remote endpoint that there will be no future writes. Once the remote endpoint has read all pending data, it is expected that calls to read on the remote return `Eof.
Note it is still possible for the remote endpoint to write to the flow and for the local endpoint to call read. This state where the local endpoint has called close but the remote endpoint has not called close is similar to that of a half-closed TCP connection or a Unix socket after shutdown(SHUTDOWN_WRITE).
close flow waits until the remote endpoint has also called close before returning. At this point no data can flow in either direction and resources associated with the flow can be freed.
The type for application callback that receives a flow that it can read/write to.
Get the destination IPv4 address and destination port that a flow is currently connected to.
val write_nodelay : flow -> buffer -> (unit, write_error) Pervasives.result iowrite_nodelay flow buffer writes the contents of buffer to the flow. The thread blocks until all data has been successfully transmitted to the remote endpoint. Buffering within the stack is minimized in this mode. Note that this API will change in a future revision to be a per-flow attribute instead of a separately exposed function.
val writev_nodelay :
flow ->
buffer list ->
(unit, write_error) Pervasives.result iowritev_nodelay flow buffers writes the contents of buffers to the flow. The thread blocks until all data has been successfully transmitted to the remote endpoint. Buffering within the stack is minimized in this mode. Note that this API will change in a future revision to be a per-flow attribute instead of a separately exposed function.
create_connection t (addr,port) opens a TCPv4 connection to the specified endpoint.