package mirage-block-partition

  1. Overview
  2. Docs
Legend:
Library
Module
Module type
Parameter
Class
Class type

Parameters

module B : Mirage_block.S

Signature

include Mirage_block.S
type nonrec error = private [>
  1. | Mirage_block.error
]

The type for block errors.

val pp_error : error Fmt.t

pp_error is the pretty-printer for errors.

type nonrec write_error = private [>
  1. | Mirage_block.write_error
]

The type for write errors.

val pp_write_error : write_error Fmt.t

pp_write_error is the pretty-printer for write errors.

type t

The type representing the internal state of the block device

val disconnect : t -> unit Lwt.t

Disconnect from the device. While this might take some time to complete, it can never result in an error.

val get_info : t -> Mirage_block.info Lwt.t

Query the characteristics of a specific block device

val read : t -> int64 -> Cstruct.t list -> (unit, error) result Lwt.t

read device sector_start buffers reads data starting at sector_start from the block device into buffers. Ok () means the buffers have been filled. Error _ indicates an I/O error has happened and some of the buffers may not be filled. Each of elements in the list buffers must be a whole number of sectors in length. The list of buffers can be of any length. Some implementations may further require that each element in buffers is exactly sector_size long.

val write : t -> int64 -> Cstruct.t list -> (unit, write_error) result Lwt.t

write device sector_start buffers writes data from buffers onto the block device starting at sector_start. Ok () means the contents of the buffers have been written. Error _ indicates a partial failure in which some of the writes may not have happened.

Once submitted, it is not possible to cancel a request and there is no timeout.

The operation may fail with: `Is_read_only: the device is read-only, no data has been written.

Each of buffers must be a whole number of sectors in length. The list of buffers can be of any length. Some implementations may further require that each element in buffers is exactly sector_size long.

The data will not be copied, so the supplied buffers must not be re-used until the IO operation completes.

val connect : B.t -> ((Mbr.Partition.t * t) list, [ `Overlapping_partitions ]) result Lwt.t

connect b returns a pair of Mbr.Partition.t from the MBR and a corresponding device representing the partition. An error is returned if any of the partitions overlap.

  • raises Invalid_argument

    if the the sector size of b is not exactly 512 bytes or if any of the partitions are outsie the device.

  • raises Failure

    if reading the MBR fails or does not parse.

OCaml

Innovation. Community. Security.