package lsp

  1. Overview
  2. Docs
package lsp
Legend:
Library
Module
Module type
Parameter
Class
Class type
type t = string
include module type of struct include StringLabels end with type t := t

Strings

val make : int -> char -> string

make n c is a string of length n with each index holding the character c.

val init : int -> f:(int -> char) -> string

init n ~f is a string of length n with index i holding the character f i (called in increasing index order).

  • since 4.02
val empty : string

The empty string.

  • since 4.13
val length : string -> int

length s is the length (number of bytes/characters) of s.

val get : string -> int -> char

get s i is the character at index i in s. This is the same as writing s.[i].

val of_bytes : bytes -> string

Return a new string that contains the same bytes as the given byte sequence.

  • since 4.13
val to_bytes : string -> bytes

Return a new byte sequence that contains the same bytes as the given string.

  • since 4.13
val blit : src:string -> src_pos:int -> dst:bytes -> dst_pos:int -> len:int -> unit

Same as Bytes.blit_string which should be preferred.

Concatenating

Note. The Stdlib.(^) binary operator concatenates two strings.

val concat : sep:string -> string list -> string

concat ~sep ss concatenates the list of strings ss, inserting the separator string sep between each.

val cat : string -> string -> string

cat s1 s2 concatenates s1 and s2 (s1 ^ s2).

  • since 4.13

Predicates and comparisons

val starts_with : prefix:string -> string -> bool

starts_with ~prefix s is true if and only if s starts with prefix.

  • since 4.13
val ends_with : suffix:string -> string -> bool

ends_with ~suffix s is true if and only if s ends with suffix.

  • since 4.13
val contains_from : string -> int -> char -> bool

contains_from s start c is true if and only if c appears in s after position start.

val rcontains_from : string -> int -> char -> bool

rcontains_from s stop c is true if and only if c appears in s before position stop+1.

val contains : string -> char -> bool

contains s c is String.contains_from s 0 c.

Extracting substrings

val sub : string -> pos:int -> len:int -> string

sub s ~pos ~len is a string of length len, containing the substring of s that starts at position pos and has length len.

val split_on_char : sep:char -> string -> string list

split_on_char ~sep s is the list of all (possibly empty) substrings of s that are delimited by the character sep.

The function's result is specified by the following invariants:

  • The list is not empty.
  • Concatenating its elements using sep as a separator returns a string equal to the input (concat (make 1 sep) (split_on_char sep s) = s).
  • No string in the result contains the sep character.
  • since 4.05

Transforming

val map : f:(char -> char) -> string -> string

map f s is the string resulting from applying f to all the characters of s in increasing order.

  • since 4.00
val mapi : f:(int -> char -> char) -> string -> string

mapi ~f s is like map but the index of the character is also passed to f.

  • since 4.02
val fold_left : f:('acc -> char -> 'acc) -> init:'acc -> string -> 'acc

fold_left f x s computes f (... (f (f x s.[0]) s.[1]) ...) s.[n-1], where n is the length of the string s.

  • since 4.13
val fold_right : f:(char -> 'acc -> 'acc) -> string -> init:'acc -> 'acc

fold_right f s x computes f s.[0] (f s.[1] ( ... (f s.[n-1] x) ...)), where n is the length of the string s.

  • since 4.13
val trim : string -> string

trim s is s without leading and trailing whitespace. Whitespace characters are: ' ', '\x0C' (form feed), '\n', '\r', and '\t'.

  • since 4.00
val escaped : string -> string

escaped s is s with special characters represented by escape sequences, following the lexical conventions of OCaml.

All characters outside the US-ASCII printable range [0x20;0x7E] are escaped, as well as backslash (0x2F) and double-quote (0x22).

The function Scanf.unescaped is a left inverse of escaped, i.e. Scanf.unescaped (escaped s) = s for any string s (unless escaped s fails).

val uppercase_ascii : string -> string

uppercase_ascii s is s with all lowercase letters translated to uppercase, using the US-ASCII character set.

  • since 4.05
val lowercase_ascii : string -> string

lowercase_ascii s is s with all uppercase letters translated to lowercase, using the US-ASCII character set.

  • since 4.05
val capitalize_ascii : string -> string

capitalize_ascii s is s with the first character set to uppercase, using the US-ASCII character set.

  • since 4.05
val uncapitalize_ascii : string -> string

uncapitalize_ascii s is s with the first character set to lowercase, using the US-ASCII character set.

  • since 4.05

Traversing

val iter : f:(char -> unit) -> string -> unit

iter ~f s applies function f in turn to all the characters of s. It is equivalent to f s.[0]; f s.[1]; ...; f s.[length s - 1]; ().

val iteri : f:(int -> char -> unit) -> string -> unit

iteri is like iter, but the function is also given the corresponding character index.

  • since 4.00

Searching

val index_from_opt : string -> int -> char -> int option

index_from_opt s i c is the index of the first occurrence of c in s after position i (if any).

  • since 4.05
val rindex_from_opt : string -> int -> char -> int option

rindex_from_opt s i c is the index of the last occurrence of c in s before position i+1 (if any).

  • since 4.05
val index_opt : string -> char -> int option

index_opt s c is String.index_from_opt s 0 c.

  • since 4.05
val rindex_opt : string -> char -> int option

rindex_opt s c is String.rindex_from_opt s (length s - 1) c.

  • since 4.05

Strings and Sequences

val to_seq : t -> char Seq.t

to_seq s is a sequence made of the string's characters in increasing order. In "unsafe-string" mode, modifications of the string during iteration will be reflected in the sequence.

  • since 4.07
val to_seqi : t -> (int * char) Seq.t

to_seqi s is like to_seq but also tuples the corresponding index.

  • since 4.07
val of_seq : char Seq.t -> t

of_seq s is a string made of the sequence's characters.

  • since 4.07

UTF decoding and validations

  • since 4.14

UTF-8

val get_utf_8_uchar : t -> int -> Uchar.utf_decode

get_utf_8_uchar b i decodes an UTF-8 character at index i in b.

val is_valid_utf_8 : t -> bool

is_valid_utf_8 b is true if and only if b contains valid UTF-8 data.

UTF-16BE

val get_utf_16be_uchar : t -> int -> Uchar.utf_decode

get_utf_16be_uchar b i decodes an UTF-16BE character at index i in b.

val is_valid_utf_16be : t -> bool

is_valid_utf_16be b is true if and only if b contains valid UTF-16BE data.

UTF-16LE

val get_utf_16le_uchar : t -> int -> Uchar.utf_decode

get_utf_16le_uchar b i decodes an UTF-16LE character at index i in b.

val is_valid_utf_16le : t -> bool

is_valid_utf_16le b is true if and only if b contains valid UTF-16LE data.

Binary decoding of integers

The functions in this section binary decode integers from strings.

All following functions raise Invalid_argument if the characters needed at index i to decode the integer are not available.

Little-endian (resp. big-endian) encoding means that least (resp. most) significant bytes are stored first. Big-endian is also known as network byte order. Native-endian encoding is either little-endian or big-endian depending on Sys.big_endian.

32-bit and 64-bit integers are represented by the int32 and int64 types, which can be interpreted either as signed or unsigned numbers.

8-bit and 16-bit integers are represented by the int type, which has more bits than the binary encoding. These extra bits are sign-extended (or zero-extended) for functions which decode 8-bit or 16-bit integers and represented them with int values.

val get_uint8 : string -> int -> int

get_uint8 b i is b's unsigned 8-bit integer starting at character index i.

  • since 4.13
val get_int8 : string -> int -> int

get_int8 b i is b's signed 8-bit integer starting at character index i.

  • since 4.13
val get_uint16_ne : string -> int -> int

get_uint16_ne b i is b's native-endian unsigned 16-bit integer starting at character index i.

  • since 4.13
val get_uint16_be : string -> int -> int

get_uint16_be b i is b's big-endian unsigned 16-bit integer starting at character index i.

  • since 4.13
val get_uint16_le : string -> int -> int

get_uint16_le b i is b's little-endian unsigned 16-bit integer starting at character index i.

  • since 4.13
val get_int16_ne : string -> int -> int

get_int16_ne b i is b's native-endian signed 16-bit integer starting at character index i.

  • since 4.13
val get_int16_be : string -> int -> int

get_int16_be b i is b's big-endian signed 16-bit integer starting at character index i.

  • since 4.13
val get_int16_le : string -> int -> int

get_int16_le b i is b's little-endian signed 16-bit integer starting at character index i.

  • since 4.13
val get_int32_ne : string -> int -> int32

get_int32_ne b i is b's native-endian 32-bit integer starting at character index i.

  • since 4.13
val seeded_hash : int -> t -> int

A seeded hash function for strings, with the same output value as Hashtbl.seeded_hash. This function allows this module to be passed as argument to the functor Hashtbl.MakeSeeded.

  • since 5.0
val get_int32_be : string -> int -> int32

get_int32_be b i is b's big-endian 32-bit integer starting at character index i.

  • since 4.13
val get_int32_le : string -> int -> int32

get_int32_le b i is b's little-endian 32-bit integer starting at character index i.

  • since 4.13
val get_int64_ne : string -> int -> int64

get_int64_ne b i is b's native-endian 64-bit integer starting at character index i.

  • since 4.13
val get_int64_be : string -> int -> int64

get_int64_be b i is b's big-endian 64-bit integer starting at character index i.

  • since 4.13
val get_int64_le : string -> int -> int64

get_int64_le b i is b's little-endian 64-bit integer starting at character index i.

  • since 4.13
val equal : t -> t -> bool
val compare : t -> t -> Ordering.t
val hash : t -> int
val to_dyn : t -> Dyn.t
val break : t -> pos:int -> t * t
val is_empty : t -> bool
val of_list : char list -> t
val is_prefix : t -> prefix:t -> bool
val is_suffix : t -> suffix:t -> bool
val take : t -> int -> t
val drop : t -> int -> t
val split_n : t -> int -> t * t
val drop_prefix : t -> prefix:t -> t option
val drop_suffix : t -> suffix:t -> t option
val capitalize : t -> t

These only change ASCII characters

val uncapitalize : t -> t
val uppercase : t -> t
val lowercase : t -> t
val index : t -> char -> int option
val index_from : t -> int -> char -> int option
val rindex : t -> char -> int option
val rindex_from : t -> int -> char -> int option
val extract_words : t -> is_word_char:(char -> bool) -> t list
val extract_comma_space_separated_words : t -> t list
val extract_blank_separated_words : t -> t list
val lsplit2 : t -> on:char -> (t * t) option
val lsplit2_exn : t -> on:char -> t * t
val rsplit2 : t -> on:char -> (t * t) option
val split : t -> on:char -> t list
val split_lines : t -> t list
val escape_only : char -> t -> t

Escace ONLY one character. escape also escapes '\n',... and transforms all chars above '~' into '\xxx' which is not suitable for UTF-8 strings.

val longest : string list -> int

Return the length of the longest string in the list

val longest_map : 'a list -> f:('a -> string) -> int
val longest_prefix : t list -> t
val exists : t -> f:(char -> bool) -> bool
val for_all : t -> f:(char -> bool) -> bool
val maybe_quoted : t -> t

maybe_quoted s is s if s doesn't need escaping according to OCaml lexing conventions and sprintf "%S" s otherwise.

(* CR-someday aalekseyev: this function is not great: barely anything "needs escaping according to OCaml lexing conventions", so the condition for whether to add the quote characters ends up being quite arbitrary. *)

val quoted : t -> t
val enumerate_and : string list -> string

Produces: "x, y and z"

val enumerate_or : string list -> string

Produces: "x, y or z"

val enumerate_one_of : t list -> t

Produces: "One of x, y or z"

val findi : ?from:int -> string -> f:(char -> bool) -> int option

Find index of first character satisfying f

val rfindi : ?from:int -> string -> f:(char -> bool) -> int option

Find index of last character satisfying f

module Set : sig ... end
module Map : sig ... end
module Table : Hashtbl.S with type key = t
val need_quoting : string -> bool

Whether the string needs quoting if it is part of a shell command

val quote_for_shell : string -> string

quote_for_shell s quotes s using Filename.quote if need_quoting s is true

val filter_map : string -> f:(char -> char option) -> string
OCaml

Innovation. Community. Security.

GitHub Discord Twitter Peertube RSS
About
Changelog Releases Industrial Users Academic Users Why OCaml
Ecosystem
Packages Community Events OCaml Planet Jobs
Resources
Install OCaml Get Started Platform Tools Language Manual Standard Library API Books Exercises Papers OCaml Playground Logo
Policies
Carbon Footprint Governance Privacy Code of Conduct