kinetic-client 0.0.1

Error log

The package failed to build. The error log from opam follows.

[NOTE] Package dune is already installed (current version is 3.17.2).
[NOTE] Package ocamlfind is already installed (current version is 1.9.8).
The following actions will be performed:
=== install 29 packages
  - install base-bytes          base
  - install base64              3.5.1
  - install conf-gmp            4
  - install conf-gmp-powm-sec   3
  - install conf-pkg-config     4
  - install conf-zlib           1
  - install cppo                1.8.0
  - install cryptokit           1.20
  - install csexp               1.5.2
  - install dune-configurator   3.17.2
  - install easy-format         1.3.4
  - install gen                 1.1
  - install kinetic-client      0.0.1
  - install lwt                 5.9.0
  - install ocaml-compiler-libs v0.12.4
  - install ocamlbuild          0.15.0
  - install ocplib-endian       1.2
  - install piqi                0.7.8
  - install piqilib             0.6.16
  - install ppx_derivers        1.2.1
  - install ppxlib              0.35.0
  - install sedlex              2.6
  - install seq                 base
  - install sexplib0            v0.17.0
  - install stdlib-shims        0.3.0
  - install topkg               1.0.7
  - install uchar               0.0.2
  - install xmlm                1.4.0
  - install zarith              1.14

The following system packages will first need to be installed:
    libgmp-dev pkg-config protobuf-compiler zlib1g-dev

<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>

opam believes some required external dependencies are missing. opam can:
> 1. Run apt-get to install them (may need root/sudo access)
  2. Display the recommended apt-get command and wait while you run it manually (e.g. in another terminal)
  3. Continue anyway, and, upon success, permanently register that this external dependency is present, but not detectable
  4. Abort the installation

[1/2/3/4] 1

+ /usr/bin/sudo "apt-get" "install" "-qq" "-yy" "libgmp-dev" "pkg-config" "protobuf-compiler" "zlib1g-dev"
- debconf: delaying package configuration, since apt-utils is not installed
- Selecting previously unselected package libgmpxx4ldbl:amd64.
- (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18745 files and directories currently installed.)
- Preparing to unpack .../00-libgmpxx4ldbl_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
- Unpacking libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
- Selecting previously unselected package libgmp-dev:amd64.
- Preparing to unpack .../01-libgmp-dev_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
- Unpacking libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
- Selecting previously unselected package libpkgconf3:amd64.
- Preparing to unpack .../02-libpkgconf3_1.8.1-1_amd64.deb ...
- Unpacking libpkgconf3:amd64 (1.8.1-1) ...
- Selecting previously unselected package zlib1g-dev:amd64.
- Preparing to unpack .../03-zlib1g-dev_1%3a1.2.13.dfsg-1_amd64.deb ...
- Unpacking zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
- Selecting previously unselected package libprotobuf32:amd64.
- Preparing to unpack .../04-libprotobuf32_3.21.12-3_amd64.deb ...
- Unpacking libprotobuf32:amd64 (3.21.12-3) ...
- Selecting previously unselected package libprotobuf-lite32:amd64.
- Preparing to unpack .../05-libprotobuf-lite32_3.21.12-3_amd64.deb ...
- Unpacking libprotobuf-lite32:amd64 (3.21.12-3) ...
- Selecting previously unselected package libprotobuf-dev:amd64.
- Preparing to unpack .../06-libprotobuf-dev_3.21.12-3_amd64.deb ...
- Unpacking libprotobuf-dev:amd64 (3.21.12-3) ...
- Selecting previously unselected package libprotoc32:amd64.
- Preparing to unpack .../07-libprotoc32_3.21.12-3_amd64.deb ...
- Unpacking libprotoc32:amd64 (3.21.12-3) ...
- Selecting previously unselected package pkgconf-bin.
- Preparing to unpack .../08-pkgconf-bin_1.8.1-1_amd64.deb ...
- Unpacking pkgconf-bin (1.8.1-1) ...
- Selecting previously unselected package pkgconf:amd64.
- Preparing to unpack .../09-pkgconf_1.8.1-1_amd64.deb ...
- Unpacking pkgconf:amd64 (1.8.1-1) ...
- Selecting previously unselected package pkg-config:amd64.
- Preparing to unpack .../10-pkg-config_1.8.1-1_amd64.deb ...
- Unpacking pkg-config:amd64 (1.8.1-1) ...
- Selecting previously unselected package protobuf-compiler.
- Preparing to unpack .../11-protobuf-compiler_3.21.12-3_amd64.deb ...
- Unpacking protobuf-compiler (3.21.12-3) ...
- Setting up libpkgconf3:amd64 (1.8.1-1) ...
- Setting up libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
- Setting up pkgconf-bin (1.8.1-1) ...
- Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
- Setting up libprotobuf32:amd64 (3.21.12-3) ...
- Setting up libprotobuf-lite32:amd64 (3.21.12-3) ...
- Setting up libprotoc32:amd64 (3.21.12-3) ...
- Setting up libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
- Setting up protobuf-compiler (3.21.12-3) ...
- Setting up pkgconf:amd64 (1.8.1-1) ...
- Setting up libprotobuf-dev:amd64 (3.21.12-3) ...
- Setting up pkg-config:amd64 (1.8.1-1) ...
- Processing triggers for libc-bin (2.36-9+deb12u9) ...

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> retrieved conf-gmp.4  (cached)
-> retrieved conf-gmp-powm-sec.3  (cached)
-> installed base-bytes.base
-> retrieved base64.3.5.1  (cached)
-> retrieved cppo.1.8.0  (cached)
-> retrieved cryptokit.1.20  (cached)
-> installed conf-gmp.4
-> installed conf-pkg-config.4
-> retrieved csexp.1.5.2  (cached)
-> retrieved easy-format.1.3.4  (cached)
-> installed conf-gmp-powm-sec.3
-> installed conf-zlib.1
-> retrieved gen.1.1  (cached)
-> retrieved kinetic-client.0.0.1  (cached)
-> retrieved ocaml-compiler-libs.v0.12.4  (cached)
-> retrieved lwt.5.9.0  (cached)
-> retrieved ocamlbuild.0.15.0  (cached)
-> retrieved ocplib-endian.1.2  (cached)
-> retrieved piqi.0.7.8  (cached)
-> retrieved piqilib.0.6.16  (cached)
-> installed csexp.1.5.2
-> installed easy-format.1.3.4
-> retrieved ppx_derivers.1.2.1  (cached)
-> retrieved sedlex.2.6  (cached)
-> retrieved seq.base  (cached)
-> installed seq.base
-> retrieved sexplib0.v0.17.0  (cached)
-> installed base64.3.5.1
-> retrieved ppxlib.0.35.0  (cached)
-> retrieved dune-configurator.3.17.2  (cached)
-> installed cppo.1.8.0
-> installed ocaml-compiler-libs.v0.12.4
-> installed ppx_derivers.1.2.1
-> installed gen.1.1
-> retrieved stdlib-shims.0.3.0  (cached)
-> installed sexplib0.v0.17.0
-> retrieved topkg.1.0.7  (cached)
-> retrieved uchar.0.0.2  (cached)
-> retrieved xmlm.1.4.0  (cached)
-> retrieved zarith.1.14  (cached)
-> installed stdlib-shims.0.3.0
-> installed ocplib-endian.1.2
-> installed dune-configurator.3.17.2
-> installed ocamlbuild.0.15.0
-> installed uchar.0.0.2
-> installed zarith.1.14
-> installed lwt.5.9.0
-> installed cryptokit.1.20
-> installed topkg.1.0.7
-> installed xmlm.1.4.0
-> installed ppxlib.0.35.0
-> installed sedlex.2.6
-> installed piqilib.0.6.16
-> installed piqi.0.7.8
[ERROR] The compilation of kinetic-client.0.0.1 failed at "make".

#=== ERROR while compiling kinetic-client.0.0.1 ===============================#
# context              2.3.0 | linux/x86_64 | ocaml-base-compiler.4.14.2 | file:///src
# path                 ~/.opam/4.14/.opam-switch/build/kinetic-client.0.0.1
# command              /usr/bin/make
# exit-code            2
# env-file             ~/.opam/log/kinetic-client-113-fd84fb.env
# output-file          ~/.opam/log/kinetic-client-113-fd84fb.out
### output ###
# piqi of-proto src/kinetic.proto -o src/kinetic.proto.piqi
# [libprotobuf WARNING google/protobuf/compiler/parser.cc:646] No syntax specified for the proto file: src/kinetic.proto. Please use 'syntax = "proto2";' or 'syntax = "proto3";' to specify a syntax version. (Defaulted to proto2 syntax.)
# piqic-ocaml --embed-piqi -C src src/kinetic.proto.piqi
# patch -d src < src/kinetic_piqi.patch
# patching file kinetic_piqi.ml
# Hunk #1 FAILED at 236.
# Hunk #2 FAILED at 602.
# Hunk #3 FAILED at 1080.
# Hunk #4 FAILED at 1463.
# 4 out of 4 hunks FAILED -- saving rejects to file kinetic_piqi.ml.rej
# make: *** [Makefile:11: kinetic_piqi_ml] Error 1



<><> Error report <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
+- The following actions failed
| - build kinetic-client 0.0.1
+- 
+- The following changes have been performed
| - install base-bytes          base
| - install base64              3.5.1
| - install conf-gmp            4
| - install conf-gmp-powm-sec   3
| - install conf-pkg-config     4
| - install conf-zlib           1
| - install cppo                1.8.0
| - install cryptokit           1.20
| - install csexp               1.5.2
| - install dune-configurator   3.17.2
| - install easy-format         1.3.4
| - install gen                 1.1
| - install lwt                 5.9.0
| - install ocaml-compiler-libs v0.12.4
| - install ocamlbuild          0.15.0
| - install ocplib-endian       1.2
| - install piqi                0.7.8
| - install piqilib             0.6.16
| - install ppx_derivers        1.2.1
| - install ppxlib              0.35.0
| - install sedlex              2.6
| - install seq                 base
| - install sexplib0            v0.17.0
| - install stdlib-shims        0.3.0
| - install topkg               1.0.7
| - install uchar               0.0.2
| - install xmlm                1.4.0
| - install zarith              1.14
+- 
# To update the current shell environment, run: eval $(opam env)

The former state can be restored with:
    /usr/bin/opam switch import "/home/opam/.opam/4.14/.opam-switch/backup/state-20250206031453.export"