On This Page
package js_of_ocaml-tyxml
js_of_ocaml-tyxml 3.4.0
Error log
The package failed to build. The error log from opam follows.
[NOTE] Package dune is already installed (current version is 2.5.1).
[NOTE] Package ocamlfind is already installed (current version is 1.9.6).
The following actions will be performed:
=== install 57 packages
- install base-bytes base
- install bigarray-compat 1.1.0
- install cmdliner 1.3.0
- install conf-dbm 1.0.0
- install conf-gmp 4
- install conf-gmp-powm-sec 3
- install conf-libpcre 2
- install conf-libssl 4
- install conf-pkg-config 4
- install conf-which 1
- install conf-zlib 1
- install cppo 1.8.0
- install cryptokit 1.20
- install dbm 1.4
- install domain-name 0.4.0
- install dune-configurator 2.5.1
- install dune-private-libs 2.5.1
- install eliom 6.9.2
- install ipaddr 5.6.0
- install js_of_ocaml 3.4.0
- install js_of_ocaml-compiler 3.4.0
- install js_of_ocaml-lwt 3.4.0
- install js_of_ocaml-ocamlbuild 3.9.0
- install js_of_ocaml-ppx 3.4.0
- install js_of_ocaml-ppx_deriving_json 3.4.0
- install js_of_ocaml-tyxml 3.4.0
- install lwt 4.5.0
- install lwt_log 1.1.2
- install lwt_ppx 2.0.1
- install lwt_react 1.2.0
- install lwt_ssl 1.2.0
- install macaddr 5.6.0
- install mmap 1.2.0
- install ocaml-migrate-parsetree 1.8.0 (deprecated)
- install ocamlbuild 0.15.0
- install ocamlnet 4.1.9-2
- install ocplib-endian 1.2
- install ocsigenserver 2.18.0
- install pcre 7.4.6
- install ppx_derivers 1.2.1
- install ppx_deriving 4.5-1
- install ppx_tools 6.6
- install ppx_tools_versioned 5.4.0
- install ppxfind 1.4
- install re 1.11.0
- install react 1.2.2
- install reactiveData 0.3.0
- install result 1.5
- install seq base
- install ssl 0.5.13
- install topkg 1.0.7
- install tyxml 4.3.0
- install uchar 0.0.2
- install uutf 1.0.3
- install xml-light 2.4
- install yojson 2.0.2
- install zarith 1.14
The following system packages will first need to be installed:
libgdbm-dev libgmp-dev libpcre3-dev libssl-dev pkg-config zlib1g-dev
<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>
opam believes some required external dependencies are missing. opam can:
> 1. Run apt-get to install them (may need root/sudo access)
2. Display the recommended apt-get command and wait while you run it manually (e.g. in another terminal)
3. Continue anyway, and, upon success, permanently register that this external dependency is present, but not detectable
4. Abort the installation
[1/2/3/4] 1
+ /usr/bin/sudo "apt-get" "install" "-qq" "-yy" "libgdbm-dev" "libgmp-dev" "libpcre3-dev" "libssl-dev" "pkg-config" "zlib1g-dev"
- debconf: delaying package configuration, since apt-utils is not installed
- Selecting previously unselected package libgdbm-dev:amd64.
- (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18745 files and directories currently installed.)
- Preparing to unpack .../00-libgdbm-dev_1.23-3_amd64.deb ...
- Unpacking libgdbm-dev:amd64 (1.23-3) ...
- Selecting previously unselected package libgmpxx4ldbl:amd64.
- Preparing to unpack .../01-libgmpxx4ldbl_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
- Unpacking libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
- Selecting previously unselected package libgmp-dev:amd64.
- Preparing to unpack .../02-libgmp-dev_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
- Unpacking libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
- Selecting previously unselected package libpcre16-3:amd64.
- Preparing to unpack .../03-libpcre16-3_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre16-3:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcre3:amd64.
- Preparing to unpack .../04-libpcre3_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre3:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcre32-3:amd64.
- Preparing to unpack .../05-libpcre32-3_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre32-3:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcrecpp0v5:amd64.
- Preparing to unpack .../06-libpcrecpp0v5_2%3a8.39-15_amd64.deb ...
- Unpacking libpcrecpp0v5:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpcre3-dev:amd64.
- Preparing to unpack .../07-libpcre3-dev_2%3a8.39-15_amd64.deb ...
- Unpacking libpcre3-dev:amd64 (2:8.39-15) ...
- Selecting previously unselected package libpkgconf3:amd64.
- Preparing to unpack .../08-libpkgconf3_1.8.1-1_amd64.deb ...
- Unpacking libpkgconf3:amd64 (1.8.1-1) ...
- Selecting previously unselected package libssl-dev:amd64.
- Preparing to unpack .../09-libssl-dev_3.0.15-1~deb12u1_amd64.deb ...
- Unpacking libssl-dev:amd64 (3.0.15-1~deb12u1) ...
- Selecting previously unselected package pkgconf-bin.
- Preparing to unpack .../10-pkgconf-bin_1.8.1-1_amd64.deb ...
- Unpacking pkgconf-bin (1.8.1-1) ...
- Selecting previously unselected package pkgconf:amd64.
- Preparing to unpack .../11-pkgconf_1.8.1-1_amd64.deb ...
- Unpacking pkgconf:amd64 (1.8.1-1) ...
- Selecting previously unselected package pkg-config:amd64.
- Preparing to unpack .../12-pkg-config_1.8.1-1_amd64.deb ...
- Unpacking pkg-config:amd64 (1.8.1-1) ...
- Selecting previously unselected package zlib1g-dev:amd64.
- Preparing to unpack .../13-zlib1g-dev_1%3a1.2.13.dfsg-1_amd64.deb ...
- Unpacking zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
- Setting up libpcre16-3:amd64 (2:8.39-15) ...
- Setting up libpcre3:amd64 (2:8.39-15) ...
- Setting up libpkgconf3:amd64 (1.8.1-1) ...
- Setting up libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
- Setting up libssl-dev:amd64 (3.0.15-1~deb12u1) ...
- Setting up libpcre32-3:amd64 (2:8.39-15) ...
- Setting up pkgconf-bin (1.8.1-1) ...
- Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
- Setting up libgdbm-dev:amd64 (1.23-3) ...
- Setting up libpcrecpp0v5:amd64 (2:8.39-15) ...
- Setting up libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
- Setting up libpcre3-dev:amd64 (2:8.39-15) ...
- Setting up pkgconf:amd64 (1.8.1-1) ...
- Setting up pkg-config:amd64 (1.8.1-1) ...
- Processing triggers for libc-bin (2.36-9+deb12u9) ...
<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> retrieved conf-dbm.1.0.0 (cached)
-> retrieved conf-gmp.4 (cached)
-> retrieved conf-gmp-powm-sec.3 (cached)
-> retrieved conf-libssl.4 (cached)
-> installed base-bytes.base
-> retrieved bigarray-compat.1.1.0 (cached)
-> retrieved cmdliner.1.3.0 (cached)
-> retrieved cppo.1.8.0 (cached)
-> installed conf-gmp.4
-> installed conf-pkg-config.4
-> installed conf-which.1
-> retrieved cryptokit.1.20 (cached)
-> retrieved dbm.1.4 (cached)
-> installed conf-dbm.1.0.0
-> retrieved domain-name.0.4.0 (cached)
-> installed conf-gmp-powm-sec.3
-> installed conf-libpcre.2
-> installed conf-libssl.4
-> installed conf-zlib.1
-> retrieved eliom.6.9.2 (cached)
-> retrieved ipaddr.5.6.0, macaddr.5.6.0 (cached)
-> retrieved js_of_ocaml.3.4.0, js_of_ocaml-compiler.3.4.0, js_of_ocaml-lwt.3.4.0, js_of_ocaml-ppx.3.4.0, js_of_ocaml-ppx_deriving_json.3.4.0, js_of_ocaml-tyxml.3.4.0 (cached)
-> installed bigarray-compat.1.1.0
-> installed cppo.1.8.0
-> retrieved dune-configurator.2.5.1, dune-private-libs.2.5.1 (cached)
-> retrieved js_of_ocaml-ocamlbuild.3.9.0 (cached)
-> retrieved lwt.4.5.0 (cached)
-> retrieved lwt_log.1.1.2 (cached)
-> retrieved lwt_ppx.2.0.1 (cached)
-> retrieved lwt_react.1.2.0 (cached)
-> retrieved lwt_ssl.1.2.0 (cached)
-> installed cmdliner.1.3.0
-> retrieved mmap.1.2.0 (cached)
-> retrieved ocaml-migrate-parsetree.1.8.0 (cached)
-> retrieved ocamlbuild.0.15.0 (cached)
-> retrieved ocplib-endian.1.2 (cached)
-> retrieved ocsigenserver.2.18.0 (cached)
-> retrieved pcre.7.4.6 (cached)
-> retrieved ppx_derivers.1.2.1 (cached)
-> installed dbm.1.4
-> installed domain-name.0.4.0
-> installed dune-private-libs.2.5.1
-> installed macaddr.5.6.0
-> installed mmap.1.2.0
-> retrieved ocamlnet.4.1.9-2 (cached)
-> installed ocplib-endian.1.2
-> retrieved ppx_deriving.4.5-1 (cached)
-> retrieved ppx_tools.6.6 (cached)
-> installed ppx_derivers.1.2.1
-> installed dune-configurator.2.5.1
-> installed ipaddr.5.6.0
-> retrieved ppx_tools_versioned.5.4.0 (cached)
-> retrieved ppxfind.1.4 (cached)
-> retrieved re.1.11.0 (cached)
-> retrieved react.1.2.2 (cached)
-> retrieved seq.base (cached)
-> installed seq.base
-> retrieved reactiveData.0.3.0 (cached)
-> retrieved result.1.5 (cached)
-> retrieved ssl.0.5.13 (cached)
-> retrieved uchar.0.0.2 (cached)
-> retrieved uutf.1.0.3 (cached)
-> retrieved topkg.1.0.7 (cached)
-> retrieved tyxml.4.3.0 (cached)
-> retrieved xml-light.2.4 (cached)
-> retrieved yojson.2.0.2 (cached)
-> installed pcre.7.4.6
-> installed re.1.11.0
-> installed result.1.5
-> installed ssl.0.5.13
-> installed ppx_tools.6.6
-> retrieved zarith.1.14 (cached)
-> installed yojson.2.0.2
-> installed lwt.4.5.0
-> installed xml-light.2.4
-> installed lwt_log.1.1.2
-> installed lwt_ssl.1.2.0
-> installed ocaml-migrate-parsetree.1.8.0
-> installed js_of_ocaml-compiler.3.4.0
-> installed ppxfind.1.4
-> installed ppx_deriving.4.5-1
-> installed ppx_tools_versioned.5.4.0
-> installed zarith.1.14
-> installed lwt_ppx.2.0.1
-> installed cryptokit.1.20
-> installed ocamlbuild.0.15.0
-> installed js_of_ocaml-ocamlbuild.3.9.0
-> installed uchar.0.0.2
-> installed js_of_ocaml.3.4.0
-> installed js_of_ocaml-ppx_deriving_json.3.4.0
-> installed js_of_ocaml-ppx.3.4.0
-> installed js_of_ocaml-lwt.3.4.0
-> installed topkg.1.0.7
-> installed uutf.1.0.3
-> installed react.1.2.2
-> installed reactiveData.0.3.0
-> installed tyxml.4.3.0
-> installed lwt_react.1.2.0
[ERROR] The compilation of js_of_ocaml-tyxml.3.4.0 failed at "dune build -p js_of_ocaml-tyxml -j 71".
-> installed ocamlnet.4.1.9-2
-> installed ocsigenserver.2.18.0
#=== ERROR while compiling js_of_ocaml-tyxml.3.4.0 ============================#
# context 2.3.0 | linux/x86_64 | ocaml-base-compiler.4.08.1 | file:///src
# path ~/.opam/4.08/.opam-switch/build/js_of_ocaml-tyxml.3.4.0
# command ~/.opam/4.08/bin/dune build -p js_of_ocaml-tyxml -j 71
# exit-code 1
# env-file ~/.opam/log/js_of_ocaml-tyxml-113-aec4f3.env
# output-file ~/.opam/log/js_of_ocaml-tyxml-113-aec4f3.out
### output ###
# File "dune-project", line 2, characters 11-14:
# 2 | (using fmt 1.0)
# ^^^
# Warning: Version 1.0 of integration with automatic formatters is not
# supported until version 1.4 of the dune language.
# There are no supported versions of this extension in version 1.3 of the dune
# language.
#
# ocamlopt lib/tyxml/js_of_ocaml_tyxml.{a,cmxa} (exit 2)
# (cd _build/default && /home/opam/.opam/4.08/bin/ocamlopt.opt -w -40 -g -a -o lib/tyxml/js_of_ocaml_tyxml.cmxa lib/tyxml/.js_of_ocaml_tyxml.objs/native/js_of_ocaml_tyxml__.cmx lib/tyxml/.js_of_ocaml_tyxml.objs/native/js_of_ocaml_tyxml__Tyxml_cast_sigs.cmx lib/tyxml/.js_of_ocaml_tyxml.objs/native/js_of_ocaml_tyxml__Tyxml_cast.cmx lib/tyxml/.js_of_ocaml_tyxml.objs/native/js_of_ocaml_tyxml__Tyxml_js.cmx lib/tyxml/.js_of_ocaml_tyxml.objs/native/js_of_ocaml_tyxml.cmx lib/tyxml/.js_of_ocaml_tyxml.objs/native/tyxml_cast.cmx lib/tyxml/.js_of_ocaml_tyxml.objs/native/tyxml_cast_sigs.cmx lib/tyxml/.js_of_ocaml_tyxml.objs/native/tyxml_js.cmx)
# File "_none_", line 1:
# Error: Files lib/tyxml/.js_of_ocaml_tyxml.objs/native/tyxml_cast.cmx
# and lib/tyxml/.js_of_ocaml_tyxml.objs/native/js_of_ocaml_tyxml__Tyxml_cast_sigs.cmx
# make inconsistent assumptions over interface Svg_types
# ocamlc lib/tyxml/js_of_ocaml_tyxml.cma (exit 2)
# (cd _build/default && /home/opam/.opam/4.08/bin/ocamlc.opt -w -40 -g -a -o lib/tyxml/js_of_ocaml_tyxml.cma lib/tyxml/.js_of_ocaml_tyxml.objs/byte/js_of_ocaml_tyxml__.cmo lib/tyxml/.js_of_ocaml_tyxml.objs/byte/js_of_ocaml_tyxml__Tyxml_cast_sigs.cmo lib/tyxml/.js_of_ocaml_tyxml.objs/byte/js_of_ocaml_tyxml__Tyxml_cast.cmo lib/tyxml/.js_of_ocaml_tyxml.objs/byte/js_of_ocaml_tyxml__Tyxml_js.cmo lib/tyxml/.js_of_ocaml_tyxml.objs/byte/js_of_ocaml_tyxml.cmo lib/tyxml/.js_of_ocaml_tyxml.objs/byte/tyxml_cast.cmo lib/tyxml/.js_of_ocaml_tyxml.objs/byte/tyxml_cast_sigs.cmo lib/tyxml/.js_of_ocaml_tyxml.objs/byte/tyxml_js.cmo)
# File "_none_", line 1:
# Error: Files lib/tyxml/.js_of_ocaml_tyxml.objs/byte/tyxml_cast.cmo
# and lib/tyxml/.js_of_ocaml_tyxml.objs/byte/js_of_ocaml_tyxml__Tyxml_cast_sigs.cmo
# make inconsistent assumptions over interface Svg_types
<><> Error report <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
+- The following actions failed
| - build js_of_ocaml-tyxml 3.4.0
+-
+- The following changes have been performed (the rest was aborted)
| - install base-bytes base
| - install bigarray-compat 1.1.0
| - install cmdliner 1.3.0
| - install conf-dbm 1.0.0
| - install conf-gmp 4
| - install conf-gmp-powm-sec 3
| - install conf-libpcre 2
| - install conf-libssl 4
| - install conf-pkg-config 4
| - install conf-which 1
| - install conf-zlib 1
| - install cppo 1.8.0
| - install cryptokit 1.20
| - install dbm 1.4
| - install domain-name 0.4.0
| - install dune-configurator 2.5.1
| - install dune-private-libs 2.5.1
| - install ipaddr 5.6.0
| - install js_of_ocaml 3.4.0
| - install js_of_ocaml-compiler 3.4.0
| - install js_of_ocaml-lwt 3.4.0
| - install js_of_ocaml-ocamlbuild 3.9.0
| - install js_of_ocaml-ppx 3.4.0
| - install js_of_ocaml-ppx_deriving_json 3.4.0
| - install lwt 4.5.0
| - install lwt_log 1.1.2
| - install lwt_ppx 2.0.1
| - install lwt_react 1.2.0
| - install lwt_ssl 1.2.0
| - install macaddr 5.6.0
| - install mmap 1.2.0
| - install ocaml-migrate-parsetree 1.8.0
| - install ocamlbuild 0.15.0
| - install ocamlnet 4.1.9-2
| - install ocplib-endian 1.2
| - install ocsigenserver 2.18.0
| - install pcre 7.4.6
| - install ppx_derivers 1.2.1
| - install ppx_deriving 4.5-1
| - install ppx_tools 6.6
| - install ppx_tools_versioned 5.4.0
| - install ppxfind 1.4
| - install re 1.11.0
| - install react 1.2.2
| - install reactiveData 0.3.0
| - install result 1.5
| - install seq base
| - install ssl 0.5.13
| - install topkg 1.0.7
| - install tyxml 4.3.0
| - install uchar 0.0.2
| - install uutf 1.0.3
| - install xml-light 2.4
| - install yojson 2.0.2
| - install zarith 1.14
+-
<><> ocaml-migrate-parsetree.1.8.0 installed successfully <><><><><><><><><><><>
=> Note: This package is deprecated.
<><> lwt.4.5.0 installed successfully <><><><><><><><><><><><><><><><><><><><><>
=> Lwt 5.0.0 will make some breaking changes in December 2019. See
https://github.com/ocsigen/lwt/issues/584
# To update the current shell environment, run: eval $(opam env)
The former state can be restored with:
/usr/bin/opam switch import "/home/opam/.opam/4.08/.opam-switch/backup/state-20250204160537.export"
On This Page