Legend:
Library
Module
Module type
Parameter
Class
Class type
Library
Module
Module type
Parameter
Class
Class type
val disconnect : t -> unit Lwt.t
Disconnect from the dual IPv4 and IPv6 stack. While this might take some time to complete, it can never result in an error.
module UDP : Mirage_protocols.UDP with type ipaddr = Ipaddr.t
module TCP : Mirage_protocols.TCP with type ipaddr = Ipaddr.t
module IP : Mirage_protocols.IP with type ipaddr = Ipaddr.t
udp t
obtains a descriptor for use with the UDP
module, usually to transmit traffic.
tcp t
obtains a descriptor for use with the TCP
module, usually to initiate outgoing connections.
ip t
obtains a descriptor for use with the IP
module, which can handle raw IPv4 and IPv6 frames, or manipulate IP address configuration on the stack interface.
val listen_udp : t -> port:int -> UDP.callback -> unit
listen_udp t ~port cb
registers the cb
callback on the UDP port
and immediately return. If port
is invalid (not between 0 and 65535 inclusive), it raises Invalid_argument
. Multiple bindings to the same port will overwrite previous bindings, so callbacks will not chain if ports clash.
val listen_tcp :
?keepalive:Mirage_protocols.Keepalive.t ->
t ->
port:int ->
(TCP.flow -> unit Lwt.t) ->
unit
listen_tcp ~keepalive t ~port cb
registers the cb
callback on the TCP port
and immediately return. If port
is invalid (not between 0 and 65535 inclusive), it raises Invalid_argument
. Multiple bindings to the same port will overwrite previous bindings, so callbacks will not chain if ports clash. If ~keepalive
is provided then these keepalive settings will be applied to the accepted connections before the callback is called.
val listen : t -> unit Lwt.t
listen t
requests that the stack listen for traffic on the network interface associated with the stack, and demultiplex traffic to the appropriate callbacks.