errpy 0.0.7

Error log

The package failed to build. The error log from opam follows.

[NOTE] Package dune is already installed (current version is 3.17.2).
[NOTE] Package ocamlfind is already installed (current version is 1.9.8).
The following actions will be performed:
=== install 9 packages
  - install conf-rust-2021      1
  - install cppo                1.8.0
  - install errpy               0.0.7
  - install ocaml-compiler-libs v0.12.4
  - install ppx_derivers        1.2.1
  - install ppx_deriving        6.0.3
  - install ppxlib              0.35.0
  - install sexplib0            v0.17.0
  - install stdlib-shims        0.3.0

The following system packages will first need to be installed:
    cargo

<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>

opam believes some required external dependencies are missing. opam can:
> 1. Run apt-get to install them (may need root/sudo access)
  2. Display the recommended apt-get command and wait while you run it manually (e.g. in another terminal)
  3. Continue anyway, and, upon success, permanently register that this external dependency is present, but not detectable
  4. Abort the installation

[1/2/3/4] 1

+ /usr/bin/sudo "apt-get" "install" "-qq" "-yy" "cargo"
- debconf: delaying package configuration, since apt-utils is not installed
- Selecting previously unselected package libpipeline1:amd64.
- (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18776 files and directories currently installed.)
- Preparing to unpack .../libpipeline1_1.5.7-1_amd64.deb ...
- Unpacking libpipeline1:amd64 (1.5.7-1) ...
- Selecting previously unselected package binfmt-support.
- Preparing to unpack .../binfmt-support_2.2.2-2_amd64.deb ...
- Unpacking binfmt-support (2.2.2-2) ...
- Selecting previously unselected package libpython3.11-minimal:amd64.
- Preparing to unpack .../libpython3.11-minimal_3.11.2-6+deb12u5_amd64.deb ...
- Unpacking libpython3.11-minimal:amd64 (3.11.2-6+deb12u5) ...
- Selecting previously unselected package python3.11-minimal.
- Preparing to unpack .../python3.11-minimal_3.11.2-6+deb12u5_amd64.deb ...
- Unpacking python3.11-minimal (3.11.2-6+deb12u5) ...
- Setting up libpython3.11-minimal:amd64 (3.11.2-6+deb12u5) ...
- Setting up python3.11-minimal (3.11.2-6+deb12u5) ...
- Selecting previously unselected package python3-minimal.
- (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19105 files and directories currently installed.)
- Preparing to unpack .../python3-minimal_3.11.2-1+b1_amd64.deb ...
- Unpacking python3-minimal (3.11.2-1+b1) ...
- Selecting previously unselected package media-types.
- Preparing to unpack .../media-types_10.0.0_all.deb ...
- Unpacking media-types (10.0.0) ...
- Selecting previously unselected package libpython3.11-stdlib:amd64.
- Preparing to unpack .../libpython3.11-stdlib_3.11.2-6+deb12u5_amd64.deb ...
- Unpacking libpython3.11-stdlib:amd64 (3.11.2-6+deb12u5) ...
- Selecting previously unselected package python3.11.
- Preparing to unpack .../python3.11_3.11.2-6+deb12u5_amd64.deb ...
- Unpacking python3.11 (3.11.2-6+deb12u5) ...
- Selecting previously unselected package libpython3-stdlib:amd64.
- Preparing to unpack .../libpython3-stdlib_3.11.2-1+b1_amd64.deb ...
- Unpacking libpython3-stdlib:amd64 (3.11.2-1+b1) ...
- Setting up python3-minimal (3.11.2-1+b1) ...
- Selecting previously unselected package python3.
- (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19515 files and directories currently installed.)
- Preparing to unpack .../00-python3_3.11.2-1+b1_amd64.deb ...
- Unpacking python3 (3.11.2-1+b1) ...
- Selecting previously unselected package libhttp-parser2.9:amd64.
- Preparing to unpack .../01-libhttp-parser2.9_2.9.4-5_amd64.deb ...
- Unpacking libhttp-parser2.9:amd64 (2.9.4-5) ...
- Selecting previously unselected package libmbedcrypto7:amd64.
- Preparing to unpack .../02-libmbedcrypto7_2.28.3-1_amd64.deb ...
- Unpacking libmbedcrypto7:amd64 (2.28.3-1) ...
- Selecting previously unselected package libmbedx509-1:amd64.
- Preparing to unpack .../03-libmbedx509-1_2.28.3-1_amd64.deb ...
- Unpacking libmbedx509-1:amd64 (2.28.3-1) ...
- Selecting previously unselected package libmbedtls14:amd64.
- Preparing to unpack .../04-libmbedtls14_2.28.3-1_amd64.deb ...
- Unpacking libmbedtls14:amd64 (2.28.3-1) ...
- Selecting previously unselected package libgit2-1.5:amd64.
- Preparing to unpack .../05-libgit2-1.5_1.5.1+ds-1+deb12u1_amd64.deb ...
- Unpacking libgit2-1.5:amd64 (1.5.1+ds-1+deb12u1) ...
- Selecting previously unselected package libicu72:amd64.
- Preparing to unpack .../06-libicu72_72.1-3_amd64.deb ...
- Unpacking libicu72:amd64 (72.1-3) ...
- Selecting previously unselected package libxml2:amd64.
- Preparing to unpack .../07-libxml2_2.9.14+dfsg-1.3~deb12u1_amd64.deb ...
- Unpacking libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
- Selecting previously unselected package libz3-4:amd64.
- Preparing to unpack .../08-libz3-4_4.8.12-3.1_amd64.deb ...
- Unpacking libz3-4:amd64 (4.8.12-3.1) ...
- Selecting previously unselected package libllvm14:amd64.
- Preparing to unpack .../09-libllvm14_1%3a14.0.6-12_amd64.deb ...
- Unpacking libllvm14:amd64 (1:14.0.6-12) ...
- Selecting previously unselected package libstd-rust-1.63:amd64.
- Preparing to unpack .../10-libstd-rust-1.63_1.63.0+dfsg1-2_amd64.deb ...
- Unpacking libstd-rust-1.63:amd64 (1.63.0+dfsg1-2) ...
- Selecting previously unselected package libstd-rust-dev:amd64.
- Preparing to unpack .../11-libstd-rust-dev_1.63.0+dfsg1-2_amd64.deb ...
- Unpacking libstd-rust-dev:amd64 (1.63.0+dfsg1-2) ...
- Selecting previously unselected package rustc.
- Preparing to unpack .../12-rustc_1.63.0+dfsg1-2_amd64.deb ...
- Unpacking rustc (1.63.0+dfsg1-2) ...
- Selecting previously unselected package cargo.
- Preparing to unpack .../13-cargo_0.66.0+ds1-1_amd64.deb ...
- Unpacking cargo (0.66.0+ds1-1) ...
- Selecting previously unselected package icu-devtools.
- Preparing to unpack .../14-icu-devtools_72.1-3_amd64.deb ...
- Unpacking icu-devtools (72.1-3) ...
- Selecting previously unselected package libclang-cpp14.
- Preparing to unpack .../15-libclang-cpp14_1%3a14.0.6-12_amd64.deb ...
- Unpacking libclang-cpp14 (1:14.0.6-12) ...
- Selecting previously unselected package libnspr4:amd64.
- Preparing to unpack .../16-libnspr4_2%3a4.35-1_amd64.deb ...
- Unpacking libnspr4:amd64 (2:4.35-1) ...
- Selecting previously unselected package libnss3:amd64.
- Preparing to unpack .../17-libnss3_2%3a3.87.1-1+deb12u1_amd64.deb ...
- Unpacking libnss3:amd64 (2:3.87.1-1+deb12u1) ...
- Selecting previously unselected package nss-plugin-pem:amd64.
- Preparing to unpack .../18-nss-plugin-pem_1.0.8+1-1_amd64.deb ...
- Unpacking nss-plugin-pem:amd64 (1.0.8+1-1) ...
- Selecting previously unselected package libcurl3-nss:amd64.
- Preparing to unpack .../19-libcurl3-nss_7.88.1-10+deb12u8_amd64.deb ...
- Unpacking libcurl3-nss:amd64 (7.88.1-10+deb12u8) ...
- Selecting previously unselected package libffi-dev:amd64.
- Preparing to unpack .../20-libffi-dev_3.4.4-1_amd64.deb ...
- Unpacking libffi-dev:amd64 (3.4.4-1) ...
- Selecting previously unselected package libicu-dev:amd64.
- Preparing to unpack .../21-libicu-dev_72.1-3_amd64.deb ...
- Unpacking libicu-dev:amd64 (72.1-3) ...
- Selecting previously unselected package libncurses6:amd64.
- Preparing to unpack .../22-libncurses6_6.4-4_amd64.deb ...
- Unpacking libncurses6:amd64 (6.4-4) ...
- Selecting previously unselected package libncurses-dev:amd64.
- Preparing to unpack .../23-libncurses-dev_6.4-4_amd64.deb ...
- Unpacking libncurses-dev:amd64 (6.4-4) ...
- Selecting previously unselected package libpfm4:amd64.
- Preparing to unpack .../24-libpfm4_4.13.0-1_amd64.deb ...
- Unpacking libpfm4:amd64 (4.13.0-1) ...
- Selecting previously unselected package libtinfo-dev:amd64.
- Preparing to unpack .../25-libtinfo-dev_6.4-4_amd64.deb ...
- Unpacking libtinfo-dev:amd64 (6.4-4) ...
- Selecting previously unselected package libxml2-dev:amd64.
- Preparing to unpack .../26-libxml2-dev_2.9.14+dfsg-1.3~deb12u1_amd64.deb ...
- Unpacking libxml2-dev:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
- Selecting previously unselected package libyaml-0-2:amd64.
- Preparing to unpack .../27-libyaml-0-2_0.2.5-1_amd64.deb ...
- Unpacking libyaml-0-2:amd64 (0.2.5-1) ...
- Selecting previously unselected package libz3-dev:amd64.
- Preparing to unpack .../28-libz3-dev_4.8.12-3.1_amd64.deb ...
- Unpacking libz3-dev:amd64 (4.8.12-3.1) ...
- Selecting previously unselected package llvm-14-runtime.
- Preparing to unpack .../29-llvm-14-runtime_1%3a14.0.6-12_amd64.deb ...
- Unpacking llvm-14-runtime (1:14.0.6-12) ...
- Selecting previously unselected package llvm-14-linker-tools.
- Preparing to unpack .../30-llvm-14-linker-tools_1%3a14.0.6-12_amd64.deb ...
- Unpacking llvm-14-linker-tools (1:14.0.6-12) ...
- Selecting previously unselected package llvm-14.
- Preparing to unpack .../31-llvm-14_1%3a14.0.6-12_amd64.deb ...
- Unpacking llvm-14 (1:14.0.6-12) ...
- Selecting previously unselected package python3-pkg-resources.
- Preparing to unpack .../32-python3-pkg-resources_66.1.1-1+deb12u1_all.deb ...
- Unpacking python3-pkg-resources (66.1.1-1+deb12u1) ...
- Selecting previously unselected package python3-pygments.
- Preparing to unpack .../33-python3-pygments_2.14.0+dfsg-1_all.deb ...
- Unpacking python3-pygments (2.14.0+dfsg-1) ...
- Selecting previously unselected package python3-yaml.
- Preparing to unpack .../34-python3-yaml_6.0-3+b2_amd64.deb ...
- Unpacking python3-yaml (6.0-3+b2) ...
- Selecting previously unselected package llvm-14-tools.
- Preparing to unpack .../35-llvm-14-tools_1%3a14.0.6-12_amd64.deb ...
- Unpacking llvm-14-tools (1:14.0.6-12) ...
- Selecting previously unselected package llvm-14-dev.
- Preparing to unpack .../36-llvm-14-dev_1%3a14.0.6-12_amd64.deb ...
- Unpacking llvm-14-dev (1:14.0.6-12) ...
- Setting up media-types (10.0.0) ...
- Setting up libpipeline1:amd64 (1.5.7-1) ...
- Setting up libicu72:amd64 (72.1-3) ...
- Setting up libyaml-0-2:amd64 (0.2.5-1) ...
- Setting up libpython3.11-stdlib:amd64 (3.11.2-6+deb12u5) ...
- Setting up libffi-dev:amd64 (3.4.4-1) ...
- Setting up libz3-4:amd64 (4.8.12-3.1) ...
- Setting up libpfm4:amd64 (4.13.0-1) ...
- Setting up libmbedcrypto7:amd64 (2.28.3-1) ...
- Setting up libnspr4:amd64 (2:4.35-1) ...
- Setting up libncurses6:amd64 (6.4-4) ...
- Setting up binfmt-support (2.2.2-2) ...
- invoke-rc.d: could not determine current runlevel
- invoke-rc.d: policy-rc.d denied execution of start.
- Setting up icu-devtools (72.1-3) ...
- Setting up libicu-dev:amd64 (72.1-3) ...
- Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
- Setting up libhttp-parser2.9:amd64 (2.9.4-5) ...
- Setting up libpython3-stdlib:amd64 (3.11.2-1+b1) ...
- Setting up libz3-dev:amd64 (4.8.12-3.1) ...
- Setting up python3.11 (3.11.2-6+deb12u5) ...
- Setting up libncurses-dev:amd64 (6.4-4) ...
- Setting up libmbedx509-1:amd64 (2.28.3-1) ...
- Setting up libmbedtls14:amd64 (2.28.3-1) ...
- Setting up python3 (3.11.2-1+b1) ...
- running python rtupdate hooks for python3.11...
- running python post-rtupdate hooks for python3.11...
- Setting up libnss3:amd64 (2:3.87.1-1+deb12u1) ...
- Setting up libxml2-dev:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
- Setting up libllvm14:amd64 (1:14.0.6-12) ...
- Setting up llvm-14-linker-tools (1:14.0.6-12) ...
- Setting up libgit2-1.5:amd64 (1.5.1+ds-1+deb12u1) ...
- Setting up python3-pkg-resources (66.1.1-1+deb12u1) ...
- Setting up libtinfo-dev:amd64 (6.4-4) ...
- Setting up libstd-rust-1.63:amd64 (1.63.0+dfsg1-2) ...
- Setting up nss-plugin-pem:amd64 (1.0.8+1-1) ...
- Setting up python3-yaml (6.0-3+b2) ...
- Setting up libstd-rust-dev:amd64 (1.63.0+dfsg1-2) ...
- Setting up python3-pygments (2.14.0+dfsg-1) ...
- Setting up llvm-14-runtime (1:14.0.6-12) ...
- Setting up libclang-cpp14 (1:14.0.6-12) ...
- Setting up rustc (1.63.0+dfsg1-2) ...
- Setting up libcurl3-nss:amd64 (7.88.1-10+deb12u8) ...
- Setting up llvm-14 (1:14.0.6-12) ...
- Setting up llvm-14-tools (1:14.0.6-12) ...
- Setting up cargo (0.66.0+ds1-1) ...
- Setting up llvm-14-dev (1:14.0.6-12) ...
- Processing triggers for libc-bin (2.36-9+deb12u9) ...

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> retrieved conf-rust-2021.1  (cached)
-> retrieved cppo.1.8.0  (cached)
-> retrieved ocaml-compiler-libs.v0.12.4  (cached)
-> retrieved ppx_derivers.1.2.1  (cached)
-> retrieved ppx_deriving.6.0.3  (cached)
-> retrieved sexplib0.v0.17.0  (cached)
-> retrieved stdlib-shims.0.3.0  (cached)
-> retrieved ppxlib.0.35.0  (cached)
-> installed ppx_derivers.1.2.1
-> installed conf-rust-2021.1
-> installed stdlib-shims.0.3.0
-> installed sexplib0.v0.17.0
-> retrieved errpy.0.0.7  (cached)
-> installed cppo.1.8.0
-> installed ocaml-compiler-libs.v0.12.4
-> installed ppxlib.0.35.0
-> installed ppx_deriving.6.0.3
[ERROR] The compilation of errpy.0.0.7 failed at "dune build -p errpy -j 255 @install".

#=== ERROR while compiling errpy.0.0.7 ========================================#
# context              2.3.0 | linux/x86_64 | ocaml-base-compiler.5.1.1 | file:///src
# path                 ~/.opam/5.1/.opam-switch/build/errpy.0.0.7
# command              ~/.opam/5.1/bin/dune build -p errpy -j 255 @install
# exit-code            1
# env-file             ~/.opam/log/errpy-113-6a7a8c.env
# output-file          ~/.opam/log/errpy-113-6a7a8c.out
### output ###
# File "vendor/ocaml/interop/ocamlrep_ocamlpool/dune", line 8, characters 9-18:
# 8 |   (names ocamlpool)))
#              ^^^^^^^^^
# (cd _build/default/vendor/ocaml/interop/ocamlrep_ocamlpool && /usr/bin/gcc -O2 -fno-strict-aliasing -fwrapv -pthread -fPIC -D_FILE_OFFSET_BITS=64 -fdiagnostics-color=always -g -I /home/opam/.opam/5.1/lib/ocaml -o ocamlpool.o -c ocamlpool.c)
# ocamlpool.c: In function 'ocamlpool_reserve_block':
# ocamlpool.c:383:14: error: too few arguments to function 'caml_shared_try_alloc'
#   383 |   value* p = caml_shared_try_alloc(d->shared_heap, wosize, tag, 0);
#       |              ^~~~~~~~~~~~~~~~~~~~~
# In file included from ocamlpool.c:296:
# /home/opam/.opam/5.1/lib/ocaml/caml/shared_heap.h:33:8: note: declared here
#    33 | value* caml_shared_try_alloc(struct caml_heap_state*,
#       |        ^~~~~~~~~~~~~~~~~~~~~
# File "src/dune", lines 13-20, characters 0-182:
# 13 | (rule
# 14 |  (targets libffi_ocaml.a)
# 15 |  (mode fallback)
# 16 |  (locks /cargo)
# 17 |  (action
# 18 |   (progn
# 19 |    (run cargo build --release)
# 20 |    (run cp ../../../target/release/libffi_ocaml.a libffi_ocaml.a))))
# (cd _build/default/src && /usr/bin/cargo build --release)
#    Compiling autocfg v1.1.0
#    Compiling proc-macro2 v1.0.52
#    Compiling unicode-ident v1.0.8
#    Compiling quote v1.0.26
#    Compiling syn v1.0.109
#    Compiling libc v0.2.140
#    Compiling crossbeam-utils v0.8.15
#    Compiling version_check v0.9.4
#    Compiling cfg-if v1.0.0
#    Compiling memchr v2.5.0
#    Compiling cc v1.0.79
#    Compiling scopeguard v1.1.0
#    Compiling serde_derive v1.0.156
#    Compiling rayon-core v1.11.0
#    Compiling serde v1.0.156
#    Compiling io-lifetimes v1.0.7
#    Compiling either v1.8.1
#    Compiling rustix v0.36.9
#    Compiling hashbrown v0.12.3
#    Compiling regex-syntax v0.6.28
#    Compiling once_cell v1.17.1
#    Compiling winnow v0.3.6
#    Compiling bitflags v1.3.2
#    Compiling siphasher v0.3.10
#    Compiling toml_datetime v0.6.1
#    Compiling rand_core v0.6.4
#    Compiling unicode-xid v0.2.4
#    Compiling arbitrary v1.3.0
#    Compiling linux-raw-sys v0.1.4
#    Compiling regex-automata v0.1.10
#    Compiling bumpalo v3.12.0
#    Compiling unicode-width v0.1.10
#    Compiling rustc-hash v1.1.0
#    Compiling heck v0.4.1
#    Compiling thiserror v1.0.39
#    Compiling os_str_bytes v6.4.1
#    Compiling termcolor v1.2.0
#    Compiling strsim v0.10.0
#    Compiling rust_to_ocaml_attr v0.0.0 (/home/opam/.opam/5.1/.opam-switch/build/errpy.0.0.7/vendor/ocaml/interop/rust_to_ocaml/rust_to_ocaml_attr)
#    Compiling itertools v0.10.5
#    Compiling rand v0.8.5
#    Compiling memoffset v0.8.0
#    Compiling crossbeam-epoch v0.9.14
#    Compiling indexmap v1.9.2
#    Compiling clap_lex v0.2.4
#    Compiling phf_shared v0.11.1
#    Compiling proc-macro-error-attr v1.0.4
#    Compiling proc-macro-error v1.0.4
#    Compiling unicase v2.6.0
#    Compiling crossbeam-channel v0.5.7
#    Compiling aho-corasick v0.7.20
#    Compiling phf_generator v0.11.1
#    Compiling tree-sitter v0.20.9
#    Compiling tree-sitter-python v0.20.2
#    Compiling ocamlrep_ocamlpool v0.0.0 (/home/opam/.opam/5.1/.opam-switch/build/errpy.0.0.7/vendor/ocaml/interop/ocamlrep_ocamlpool)
#    Compiling crossbeam-deque v0.8.3
# The following warnings were emitted during compilation:
# 
# warning: ocamlpool.c: In function 'ocamlpool_reserve_block':
# warning: ocamlpool.c:383:14: error: too few arguments to function 'caml_shared_try_alloc'
# warning:   383 |   value* p = caml_shared_try_alloc(d->shared_heap, wosize, tag, 0);
# warning:       |              ^~~~~~~~~~~~~~~~~~~~~
# warning: In file included from ocamlpool.c:296:
# warning: /home/opam/.opam/5.1/lib/ocaml/caml/shared_heap.h:33:8: note: declared here
# warning:    33 | value* caml_shared_try_alloc(struct caml_heap_state*,
# warning:       |        ^~~~~~~~~~~~~~~~~~~~~
# 
# error: failed to run custom build command for `ocamlrep_ocamlpool v0.0.0 (/home/opam/.opam/5.1/.opam-switch/build/errpy.0.0.7/vendor/ocaml/interop/ocamlrep_ocamlpool)`
# 
# Caused by:
#   process didn't exit successfully: `/home/opam/.opam/5.1/.opam-switch/build/errpy.0.0.7/target/release/build/ocamlrep_ocamlpool-e182d0766aaa3256/build-script-build` (exit status: 1)
#   --- stdout
#   cargo:rerun-if-changed=ocamlpool.c
#   TARGET = Some("x86_64-unknown-linux-gnu")
#   OPT_LEVEL = Some("3")
#   HOST = Some("x86_64-unknown-linux-gnu")
#   cargo:rerun-if-env-changed=CC_x86_64-unknown-linux-gnu
#   CC_x86_64-unknown-linux-gnu = None
#   cargo:rerun-if-env-changed=CC_x86_64_unknown_linux_gnu
#   CC_x86_64_unknown_linux_gnu = None
#   cargo:rerun-if-env-changed=HOST_CC
#   HOST_CC = None
#   cargo:rerun-if-env-changed=CC
#   CC = None
#   cargo:rerun-if-env-changed=CFLAGS_x86_64-unknown-linux-gnu
#   CFLAGS_x86_64-unknown-linux-gnu = None
#   cargo:rerun-if-env-changed=CFLAGS_x86_64_unknown_linux_gnu
#   CFLAGS_x86_64_unknown_linux_gnu = None
#   cargo:rerun-if-env-changed=HOST_CFLAGS
#   HOST_CFLAGS = None
#   cargo:rerun-if-env-changed=CFLAGS
#   CFLAGS = None
#   cargo:rerun-if-env-changed=CRATE_CC_NO_DEFAULTS
#   CRATE_CC_NO_DEFAULTS = None
#   DEBUG = Some("false")
#   CARGO_CFG_TARGET_FEATURE = Some("fxsr,sse,sse2")
#   running: "cc" "-O3" "-ffunction-sections" "-fdata-sections" "-fPIC" "-m64" "-I" "/home/opam/.opam/5.1/lib/ocaml" "-Wall" "-Wextra" "-o" "/home/opam/.opam/5.1/.opam-switch/build/errpy.0.0.7/target/release/build/ocamlrep_ocamlpool-f8fa6e6a0f11fdca/out/ocamlpool.o" "-c" "ocamlpool.c"
#   cargo:warning=ocamlpool.c: In function 'ocamlpool_reserve_block':
#   cargo:warning=ocamlpool.c:383:14: error: too few arguments to function 'caml_shared_try_alloc'
#   cargo:warning=  383 |   value* p = caml_shared_try_alloc(d->shared_heap, wosize, tag, 0);
#   cargo:warning=      |              ^~~~~~~~~~~~~~~~~~~~~
#   cargo:warning=In file included from ocamlpool.c:296:
#   cargo:warning=/home/opam/.opam/5.1/lib/ocaml/caml/shared_heap.h:33:8: note: declared here
#   cargo:warning=   33 | value* caml_shared_try_alloc(struct caml_heap_state*,
#   cargo:warning=      |        ^~~~~~~~~~~~~~~~~~~~~
#   exit status: 1
# 
#   --- stderr
# 
# 
#   error occurred: Command "cc" "-O3" "-ffunction-sections" "-fdata-sections" "-fPIC" "-m64" "-I" "/home/opam/.opam/5.1/lib/ocaml" "-Wall" "-Wextra" "-o" "/home/opam/.opam/5.1/.opam-switch/build/errpy.0.0.7/target/release/build/ocamlrep_ocamlpool-f8fa6e6a0f11fdca/out/ocamlpool.o" "-c" "ocamlpool.c" with args "cc" did not execute successfully (status code exit status: 1).
# 
# 
# warning: build failed, waiting for other jobs to finish...



<><> Error report <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
+- The following actions failed
| - build errpy 0.0.7
+- 
+- The following changes have been performed
| - install conf-rust-2021      1
| - install cppo                1.8.0
| - install ocaml-compiler-libs v0.12.4
| - install ppx_derivers        1.2.1
| - install ppx_deriving        6.0.3
| - install ppxlib              0.35.0
| - install sexplib0            v0.17.0
| - install stdlib-shims        0.3.0
+- 
# To update the current shell environment, run: eval $(opam env)

The former state can be restored with:
    /usr/bin/opam switch import "/home/opam/.opam/5.1/.opam-switch/backup/state-20250206041744.export"