package core

  1. Overview
  2. Docs
Legend:
Library
Module
Module type
Parameter
Class
Class type

Conversions between units of measure that are based on bytes (like kilobytes, megabytes, gigabytes, and words).

t's are created with of_bytes_float_exn, of_words_float_exn, of_kilobytes, of_megabytes, etc.

Note: in this module, kilobytes, Megabytes, etc. are defined as powers of 1024:

  • 1 kilobyte: 2^10 = 1024 bytes
  • 1 Megabyte: 2^20 = 1024^2 bytes
  • 1 Gigabyte: 2^30 = 1024^3 bytes
  • 1 Terabyte: 2^40 = 1024^4 bytes
  • 1 Petabyte: 2^50 = 1024^5 bytes
  • 1 Exabyte: 2^60 = 1024^6 bytes
type t
val sexp_of_t : t -> Sexplib0.Sexp.t
include Typerep_lib.Typerepable.S with type t := t
val typerep_of_t : t Typerep_lib.Std_internal.Typerep.t
val typename_of_t : t Typerep_lib.Typename.t
val create : [ `Bytes | `Kilobytes | `Megabytes | `Gigabytes | `Words ] -> Base.Float.t -> t
  • deprecated [since 2019-01] Use [of_bytes], [of_kilobytes], [of_megabytes], etc as appropriate.
include Comparable.S_plain with type t := t
include Base.Comparable.S with type t := t
val (>=) : t -> t -> bool
val (<=) : t -> t -> bool
val (=) : t -> t -> bool
val (>) : t -> t -> bool
val (<) : t -> t -> bool
val (<>) : t -> t -> bool
val equal : t -> t -> bool
val min : t -> t -> t
val max : t -> t -> t
val ascending : t -> t -> int
val descending : t -> t -> int
val between : t -> low:t -> high:t -> bool
val clamp_exn : t -> min:t -> max:t -> t
val clamp : t -> min:t -> max:t -> t Base__.Or_error.t
type comparator_witness
val comparator : (t, comparator_witness) Base__Comparator.comparator
val validate_lbound : min:t Maybe_bound.t -> t Validate.check
val validate_ubound : max:t Maybe_bound.t -> t Validate.check
val validate_bound : min:t Maybe_bound.t -> max:t Maybe_bound.t -> t Validate.check
module Replace_polymorphic_compare : sig ... end
include Hashable.S_plain with type t := t
include Ppx_compare_lib.Comparable.S with type t := t
val compare : t Base__Ppx_compare_lib.compare
include Ppx_hash_lib.Hashable.S with type t := t
val hash_fold_t : t Base__Ppx_hash_lib.hash_fold
val hash : t -> Base__Ppx_hash_lib.Std.Hash.hash_value
val hashable : t Core__.Hashtbl.Hashable.t
module Table : Hashtbl.S_plain with type key = t
module Hash_set : Hash_set.S_plain with type elt = t
module Hash_queue : Hash_queue.S with type key = t
val of_string : string -> t
val to_string : t -> string
val of_bytes : Base.Float.t -> t

This is a deprecated alias for of_bytes_float_exn.

  • deprecated [since 2019-01] Use [of_bytes_int], [of_bytes_int63], [of_bytes_int64_exn] or [of_bytes_float_exn] as appropriate.
val of_bytes_int : Base.Int.t -> t
val of_bytes_int63 : Int63.t -> t
val of_bytes_int64_exn : Int64.t -> t

This will raise if and only if the argument can not be represented as a Byte_units.t. Specifically this is if the argument is outside of [-2^62,2^62).

val of_bytes_float_exn : Base.Float.t -> t

This will raise if and only if the argument can not be represented as a Byte_units.t. Specifically this is if the argument is outside of [-2^62,2^62),

val of_kilobytes : Base.Float.t -> t

create of Byte_units based on the number of kilobytes. N.B. This will raise if the value is outside of [-2^52,2^52).

val of_megabytes : Base.Float.t -> t

create of Byte_units based on the number of Megabytes. N.B. This will raise if the value is outside of [-2^42,2^42).

val of_gigabytes : Base.Float.t -> t

create of Byte_units based on the number of Gigabytes. N.B. This will raise if the value is outside of [-2^32,2^32).

val of_terabytes : Base.Float.t -> t

create of Byte_units based on the number of Terabytes. N.B. This will raise if the value is outside of [-2^22,2^22).

val of_petabytes : Base.Float.t -> t

create of Byte_units based on the number of Petabytes. N.B. This will raise if the value is outside of [-2^12,2^12).

val of_exabytes : Base.Float.t -> t

create of Byte_units based on the number of Exabytes. N.B. This will raise if the value is outside of [-4,4).

val of_words : Base.Float.t -> t

Do not use, consider using of_words_int instead. Alias for of_words_float_exn.

  • deprecated [since 2019-01] Use [of_words_int] or [of_words_float_exn] instead.
val of_words_int : Base.Int.t -> t

create of Byte_units based on the number of machine words.

val of_words_float_exn : Base.Float.t -> t

Create of Byte_units based on the number of machine words. On 64-bit platforms this will raise if the value is outside of [-2^59,2^59). On 32-bit platforms (including JS) this will raise if the value is outside of [-2^60,2^60).

val to_string_hum : t -> Base.String.t

to_string_hum t returns a string representation of t. This will use the largest unit that will not make the translated value be below 1.

For example Byte_units.to_string_hum (Byte_units.of_bytes_int 1000) gives 1000B, but Byte_units.to_string_hum (Byte_units.of_bytes_int 1500) gives 1.46484K.

val to_string_short : t -> Base.String.t
  • deprecated [since 2020-06] Use [Short.to_string] instead.
module Short : sig ... end
val bytes : t -> Base.Float.t

This is a deprecated alias for bytes_float.

  • deprecated [since 2019-01] Use [bytes_int_exn], [bytes_int63], [bytes_int64] or [bytes_float] as appropriate.
val bytes_int_exn : t -> Base.Int.t

This will raise if and only if the value of this Byte_units.t can not be represented as an int. This can only happen on platforms where int is less than 63 bits, specifically JS and 32-bit OCaml where this will raise if the number of bytes is outside of [-2^30,2^30).

val bytes_int63 : t -> Int63.t
val bytes_int64 : t -> Int64.t
val bytes_float : t -> Base.Float.t
val kilobytes : t -> Base.Float.t
val megabytes : t -> Base.Float.t
val gigabytes : t -> Base.Float.t
val terabytes : t -> Base.Float.t
val petabytes : t -> Base.Float.t
val exabytes : t -> Base.Float.t
val words : t -> Base.Float.t

Do not use, consider using words_int_exn instead. Alias for words_float

  • deprecated [since 2019-01] Use [words_int_exn] or [words_float] instead.
val words_int_exn : t -> Base.Int.t

In JS and on 32-bit OCaml this will raise if and only if the number of bytes is outside of [-2^32,2^32).

val words_float : t -> Base.Float.t
val zero : t
val min_value : t
val max_value : t
val sign : t -> Sign.t
val abs : t -> t
val neg : t -> t
val scale : t -> Base.Float.t -> t

scale t mul scale the measure t by mul

val arg_type : t Command.Arg_type.t
module Infix : sig ... end
include module type of Infix
val (-) : t -> t -> t
val (+) : t -> t -> t
val (/) : t -> Base.Float.t -> t

( / ) t mul scales t by 1/mul

val (//) : t -> t -> Base.Float.t

( // ) t1 t2 returns the ratio of t1 to t2

include Quickcheck.S_range with type t := t
include Quickcheck_intf.S with type t := t
val quickcheck_generator : t Base_quickcheck.Generator.t
val quickcheck_observer : t Base_quickcheck.Observer.t
val quickcheck_shrinker : t Base_quickcheck.Shrinker.t
val gen_incl : t -> t -> t Base_quickcheck.Generator.t

gen_incl lower_bound upper_bound produces values between lower_bound and upper_bound, inclusive. It uses an ad hoc distribution that stresses boundary conditions more often than a uniform distribution, while still able to produce any value in the range. Raises if lower_bound > upper_bound.

val gen_uniform_incl : t -> t -> t Base_quickcheck.Generator.t

gen_uniform_incl lower_bound upper_bound produces a generator for values uniformly distributed between lower_bound and upper_bound, inclusive. Raises if lower_bound > upper_bound.

module Stable : sig ... end
OCaml

Innovation. Community. Security.