package core

  1. Overview
  2. Docs
package core
Legend:
Library
Module
Module type
Parameter
Class
Class type
type t = private Int63.t

t is immediate on 64bit boxes and so plays nicely with the GC write barrier.

String and sexp output takes the form 'HH:MM:SS.sssssssss'; see Core.Ofday_intf for accepted input. If input includes more than 9 decimal places in seconds, rounds to the nearest nanosecond, with the midpoint rounded up. Allows 60.sss... seconds for leap seconds but treats it as exactly 60s regardless of fractional part.

type underlying = Int63.t

Time of day.

t represents a clock-face time of day. Usually this is equivalent to a time-offset from midnight, and each t occurs exactly once in each calendar day. However, when daylight saving time begins or ends, some clock face times (and therefore t's) can occur more than once per day or not at all, and e.g. 04:00 can occur three or five hours after midnight, so knowing your current offset from midnight is *not* in general equivalent to knowing the current t.

(See Zone for tools to help you cope with DST.)

There is one nonstandard representable value, start_of_next_day, which can be thought of as "24:00:00" in 24-hour time. It is essentially "00:00:00" on the next day. By having this value, we allow comparisons against a strict upper bound on t values. However, it has some odd properties; for example, Time.of_date_ofday ~zone date start_of_next_day |> Time.to_date ~zone yields a different date.

Any ofday will satisfy start_of_day <= ofday <= start_of_next_day.

include Bin_prot.Binable.S with type t := t
val bin_size_t : t Bin_prot__.Size.sizer
val bin_write_t : t Bin_prot__.Write.writer
val bin_read_t : t Bin_prot__.Read.reader
val __bin_read_t__ : (int -> t) Bin_prot__.Read.reader
val bin_shape_t : Bin_prot__.Shape.t
val bin_writer_t : t Bin_prot__.Type_class.writer
val bin_reader_t : t Bin_prot__.Type_class.reader
val bin_t : t Bin_prot__.Type_class.t
include Sexplib0.Sexpable.S with type t := t
val t_of_sexp : Sexplib0__.Sexp.t -> t
val sexp_of_t : t -> Sexplib0__.Sexp.t
val t_sexp_grammar : t Sexplib0.Sexp_grammar.t
include Typerep_lib.Typerepable.S with type t := t
val typerep_of_t : t Typerep_lib.Std_internal.Typerep.t
val typename_of_t : t Typerep_lib.Typename.t
include Interfaces.Comparable_binable with type t := t
include Base.Comparable.S with type t := t
val (>=) : t -> t -> bool
val (<=) : t -> t -> bool
val (=) : t -> t -> bool
val (>) : t -> t -> bool
val (<) : t -> t -> bool
val (<>) : t -> t -> bool
val equal : t -> t -> bool
val compare : t -> t -> int
val min : t -> t -> t
val max : t -> t -> t
val ascending : t -> t -> int
val descending : t -> t -> int
val between : t -> low:t -> high:t -> bool
val clamp_exn : t -> min:t -> max:t -> t
val clamp : t -> min:t -> max:t -> t Base__.Or_error.t
type comparator_witness
val validate_lbound : min:t Maybe_bound.t -> t Validate.check
val validate_ubound : max:t Maybe_bound.t -> t Validate.check
val validate_bound : min:t Maybe_bound.t -> max:t Maybe_bound.t -> t Validate.check
module Replace_polymorphic_compare : sig ... end
include Comparator.S with type t := t with type comparator_witness := comparator_witness
include Interfaces.Hashable_binable with type t := t
include Ppx_hash_lib.Hashable.S with type t := t
val hash_fold_t : t Base__Ppx_hash_lib.hash_fold
val hash : t -> Base__Ppx_hash_lib.Std.Hash.hash_value
val hashable : t Core__.Hashtbl.Hashable.t
module Table : Hashtbl.S_binable with type key = t
module Hash_set : Hash_set.S_binable with type elt = t
module Hash_queue : Hash_queue.S with type key = t
val pp : Base__.Formatter.t -> t -> unit
include Interfaces.Robustly_comparable with type t := t
val (>=.) : t -> t -> bool
val (<=.) : t -> t -> bool
val (=.) : t -> t -> bool
val (>.) : t -> t -> bool
val (<.) : t -> t -> bool
val (<>.) : t -> t -> bool
val robustly_compare : t -> t -> int
include Quickcheck.S_range with type t := t
include Quickcheck_intf.S with type t := t
val quickcheck_generator : t Base_quickcheck.Generator.t
val quickcheck_observer : t Base_quickcheck.Observer.t
val quickcheck_shrinker : t Base_quickcheck.Shrinker.t
val gen_incl : t -> t -> t Base_quickcheck.Generator.t

gen_incl lower_bound upper_bound produces values between lower_bound and upper_bound, inclusive. It uses an ad hoc distribution that stresses boundary conditions more often than a uniform distribution, while still able to produce any value in the range. Raises if lower_bound > upper_bound.

val gen_uniform_incl : t -> t -> t Base_quickcheck.Generator.t

gen_uniform_incl lower_bound upper_bound produces a generator for values uniformly distributed between lower_bound and upper_bound, inclusive. Raises if lower_bound > upper_bound.

of_string supports and correctly interprets 12h strings with the following suffixes:

      "A", "AM", "A.M.", "A.M"
      "P", "PM", "P.M.", "P.M"

as well as the lowercase and space-prefixed versions of these suffixes.

of_string also fully supports 24h wall-clock times.

to_string only produces the 24h format.

val of_string : string -> t
val to_string : t -> string
val create : ?hr:Base.Int.t -> ?min:Base.Int.t -> ?sec:Base.Int.t -> ?ms:Base.Int.t -> ?us:Base.Int.t -> ?ns:Base.Int.t -> Base.Unit.t -> t
val to_parts : t -> Span.Parts.t
val start_of_day : t

Smallest valid ofday.

val start_of_next_day : t

Largest representable ofday; see notes above on how start_of_next_day behaves differently from other ofday values.

val to_span_since_start_of_day : t -> Span.t

Note that these names are only really accurate on days without DST transitions. When clocks move forward or back, of_span_since_start_of_day_exn s will not necessarily occur s after that day's midnight.

val of_span_since_start_of_day_exn : Span.t -> t
val of_span_since_start_of_day : Span.t -> t
  • deprecated [since 2018-04] use [of_span_since_start_of_day_exn] instead
val span_since_start_of_day_is_valid : Span.t -> Base.Bool.t

Reports whether a span represents a valid time since the start of the day, i.e. whether of_span_since_start_of_day_exn span would succeed.

val of_span_since_start_of_day_unchecked : Span.t -> t

of_span_since_start_of_day_unchecked does not validate that the Span represents a valid Ofday.

Behavior of other Ofday accessors is unspecified, but still safe (e.g., won't segfault), if the input does not satisfy span_since_start_of_day_is_valid.

val add : t -> Span.t -> t Base.Option.t

add t s shifts the time of day t by the span s. It returns None if the result is not in the same 24-hour day.

val sub : t -> Span.t -> t Base.Option.t
val next : t -> t Base.Option.t

next t return the next t (next t > t) or None if t = end of day.

val prev : t -> t Base.Option.t

prev t return the previous t (prev t < t) or None if t = start of day.

val diff : t -> t -> Span.t

diff t1 t2 returns the difference in time between two ofdays, as if they occurred on the same 24-hour day.

val small_diff : t -> t -> Span.t

Returns the time-span separating the two of-days, ignoring the hour information, and assuming that the of-days represent times that are within a half-hour of each other. This is useful for comparing two ofdays in unknown time-zones.

val to_string_trimmed : t -> Base.String.t

Trailing groups of zeroes are trimmed such that the output is printed in terms of the smallest non-zero units among nanoseconds, microseconds, milliseconds, or seconds; or minutes if all of the above are zero.

val to_sec_string : t -> Base.String.t

HH:MM:SS, without any subsecond components. Seconds appear even if they are zero.

val of_string_iso8601_extended : ?pos:Base.Int.t -> ?len:Base.Int.t -> Base.String.t -> t

24-hour times according to the ISO 8601 standard. This function can raise.

val to_millisecond_string : t -> Base.String.t

with milliseconds

val to_millisec_string : t -> Base.String.t
  • deprecated [since 2018-04] use [to_millisecond_string] instead
val approximate_end_of_day : t

The largest representable value below start_of_next_day, i.e. one nanosecond before midnight.

val add_exn : t -> Span.t -> t

add_exn t span shifts the time of day t by span. It raises if the result is not in the same 24-hour day. Daylight savings shifts are not accounted for.

val sub_exn : t -> Span.t -> t

sub_exn t span shifts the time of day t back by span. It raises if the result is not in the same 24-hour day. Daylight savings shifts are not accounted for.

val every : Span.t -> start:t -> stop:t -> t Base.List.t Or_error.t

every span ~start ~stop returns a sorted list of all ts that can be expressed as start + (i * span) without overflow, and satisfying t >= start && t <= stop.

If span <= Span.zero || start > stop, returns an Error.

The result never crosses the midnight boundary. Constructing a list crossing midnight, e.g. every hour from 10pm to 2am, requires multiple calls to every.

val to_microsecond_string : t -> Base.String.t
val arg_type : [ `Use_Time_ns_unix ]
  • deprecated [since 2021-03] Use [Time_ns_unix]
val now : [ `Use_Time_ns_unix ]
  • deprecated [since 2021-03] Use [Time_ns_unix]
val of_ofday_float_round_nearest : [ `Use_Time_ns_unix ]
  • deprecated [since 2021-03] Use [Time_ns_unix]
val of_ofday_float_round_nearest_microsecond : [ `Use_Time_ns_unix ]
  • deprecated [since 2021-03] Use [Time_ns_unix]
val to_ofday_float_round_nearest : [ `Use_Time_ns_unix ]
  • deprecated [since 2021-03] Use [Time_ns_unix]
val to_ofday_float_round_nearest_microsecond : [ `Use_Time_ns_unix ]
  • deprecated [since 2021-03] Use [Time_ns_unix]
module Option : sig ... end
module Zoned : sig ... end
OCaml

Innovation. Community. Security.

GitHub Discord Twitter Peertube RSS
About
Changelog Releases Industrial Users Academic Users Why OCaml
Ecosystem
Packages Community Events OCaml Planet Jobs
Resources
Install OCaml Get Started Platform Tools Language Manual Standard Library API Books Exercises Papers OCaml Playground Logo
Policies
Carbon Footprint Governance Privacy Code of Conduct