package fmlib_parse

'a t Type of a parse combinator returning an 'a.

p >>= f

Parse first the input according to the combinator p. In case of success, feed the returned value of p into the function f to get the combinator to parse next.

let* x = p in f x is equivalent to p >>= f

The let* combinator let us express parsing sequences conveniently. Example:

let* x = p in       (* parse [p], result [x] in case of success. *)
let* y = q x in     (* parse [q x], result [y] ... *)
let* z = r x y in   (* ... *)
...
return f x y z ...

The wildcard let* _ = ... can be used to ignore results of intermediate parsing steps.

map f p

Try combinator p. In case of success, map the returned value x to f x. In case of failure, do nothing.

map f p is equivalent to let* x = p in return (f x).

map_and_update f p

Try combinator p. In case of success, map the returned state state and value a to f state a. In case of failure, do nothing.

succeed a

Succeed immediately without consuming token. Return object a as result.

return a is equivalent to succeed a.

unexpected expect triggers a syntax error signalling the expectation expect.

• deprecated

  Don't use this function. It will be removed in future versions.

clear_last_expectation p Clear last failed expectation.

This is useful e.g. after stripping whitespace. Since stripping whitespace means skip_one_or_more ws or skip_zero_or_more ws, after skipping whitespace the parser can still expect more whitespace. Therefore there is a failed expectation *whitespace* on the stack. However you rarely want this expectation to be reported.

• deprecated

  Use no_expectations

fail error triggers a semantic error.

p </> q

Try first combinator p. In case of success or failure with consumed token, p </> q is equivalent to p.

If p fails without consuming token, then p </> q is equivalent to q.

choices p [q r t ...] is equivalent to p </> q </> r </> t </> ....

p <?> expect

Try combinator p. In case of success or failure with consumed token, p <?> expect is equivalent to p.

If p fails without consuming token, then the failed expectations are replaced with the failed expectation expect.

Usually p is a combinator implementing a choice between various alternatives of a grammar construct. The <?> combinator allows to replace the set of failed grammar alternatives with a higher abstraction of the failed expectation. E.g. instead of getting the failed expectations identifier, '(', -, ... we can get the failed expectation expression.

no_expectations p

Parse the combinator p.

• p fails: no_expectations p fails with the same error.

• p succeeds without consuming tokens: no_expectations p succeeds without any added expectations.

• p succeeds and consumes some token: no_expectations p succeeds without any expectations.

Many combinators can succeed with expectations. E.g. the combinator optional p expects a p and succeeds if it does not encounter a construct described by p. All repetitive combinators like one_or_more try to consume as many items as possible. At the end they are still expecting an item.

This combinator allows to clear such unneeded expectations. It is particularly useful when removing whitespace. The expectation of whitespace is not a meaningful error message to the user.

Get the current user state.

Set the user state.

update f Update the user state using f.

get_and_update f Get the current user state and then update the user state. The returned value is the old state.

state_around before p after

If s0 is the initial state, then execute p with the start state before s0 and set the update the final state s1 by after s0 a s1 where a is the returned value in case of success and s1 is the final state after executing p.

optional p

Try combinator p.

• Success: Return Some a where a is the returned value.
• Failure without consuming token: Return None
• Failure with consuming token: Remain in the error state.

zero_or_more_fold_left start f p

Try the combinator p as often as possible. Accumulate the results to the start value start using the folding function f.

one_or_more_fold_left first f p

Try the combinator p at least once and then as often as possible. Put the first value returned by p into the function first returning a result and accumulate the subsequent values as often as possible and accumulate the results to the start value returned by first using the folding function f.

zero_or_more p Parse zero or more occurrences of p and return the collected result in a list.

zero_or_more p Parse one or more occurrences of p and return the collected results as a pair of the first value and a list of the remaining values.

skip_zero_or_more p Parse zero or more occurrences of p, ignore the result and return the number of occurrences.

skip_one_or_more p Parse one or more occurrences of p, ignore the result and return the number of occurrences.

one_or_more_separated first next p sep

Parse one or more occurrences of p separated by sep. Use first to convert the first occurrence of p into the result and use next to accumulate the results.

counted min max start next p

Collect between min and max numbers if elements recognized by the combinator p and accumulate them with the folding function next into the start value start.

parenthesized make lpar p rpar

Parse an expression recognized by the combinator p enclosed within parentheses. lpar recognizes the left parenthesis and rpar recognizes the right parenthesis. The value returned by lpar is given to rpar. With that mechanism it is possible to recognize matching parentheses of different kinds.

After successful parsing the function make is called with the final value (and the parentheses).

The combinator p is entered as a thunk in order to be able to call it recursively. In the combinator parenthesized the combinator p is called only guardedly. Therefore the combinator p can contain nested parenthesized expressions.

Precondition: The combinator lpar has to consume at least one token in case of success.

operator_expression
    primary         (* Parse a primary expression *)
    unary_operator  (* Parse a unary operator *)
    binary_operator (* Parse a binary operator *)
    is_left         (* Is the left operator binding stronger? *)
    make_unary      (* Make a unary expression from the operator and
                       its operand *)
    make_binary     (* Make a binary expression from the operator
                       and its operands *)

Parse an operator expression by using the following combinators:

• is_left o1 o2 decides, if the operator o1 on the left has more binding power than the operator o2. I.e. if the unary operator u has more binding power than the binary operator o, then u a o b is parsed as (u a) o b. If the binary operator o1 has more binding power than the binary operator o2, then a o1 b o2 b is parsed as (a o1 b) o2 c.

• make_unary u a makes the unary expression (u a).

• make_binary a o b makes the binary expression (a o b).

• primary parses a primary expression.

• unary_operator parses a unary operator.

• binary_operator parses a binary operator.

Precondition: primary, unary_operator and binary_operator have to consume at least one token in case of success. Otherwise infinite recursion can happen.

backtrack p expect

Try the combinator p. In case of failure with consuming token, push the consumed token back to the lookahead and let it fail without consuming token. Use expect to record the failed expectation.

Backtracking reduces the performance, because the token pushed back to the lookahead have to be parsed again. Try to avoid backtracking whenever possible.

followed_by p expect

Parses p and backtracks (i.e. all tokens of p will be pushed back to the lookahead). In case p succeeds, the followed_by parser succeeds without consuming token. Otherwise it fails without consuming tokens.

not_followed_by p expect

Parses p and backtracks (i.e. all tokens of p will be pushed back to the lookahead). In case p succeeds, the not_followed_by parser fails without consuming token. Otherwise it succeeds without consuming tokens.

step expect f

Elementary parsing step.

expect describes the expectation in case the parsing step fails.

Failure can happen in 3 cases:

• The end of input has been reached.
• The next token is not indented properly.
• The function f indicates an unexpected token by returning None.

The function f is called with two arguments.

• The current state.
• The start and end position of the next token.
• The next token.

f has to return an object of type 'a and a new state, if it accepts the token. Or it returns the expectation, if the current token does not satisfy its expectation.

expect_end a

Parse the end of input and return an a in case of success.

If p is a parser which parses some construct then p >>= expect_end succeeds if p succeeds and is immediately followed by the end of input.

CAUTION: This combinator should almost never be used. It might be useful in partial parsers (see Partial Parsing for details). Usually the Token_parser handles the end of input internally.

Never ever backtrack over this combinator.

located p Parse p and return the parse value together with its location in the file.

indent i p

Parse p indented at least i columns relative to its parent.

Precondition: 0 <= i

The indentation of p is defined by the indentation of its leftmost token. The leftmost token has to be indented at least i columns relative to the parent of p.

align p

Use the start position of the first token of p to align it with other constructs.

In an aligned construct the first token is the leftmost token.

Alignment makes sense if there are at least two combinators which are aligned and indented. E.g. suppose there are two combinators p and q. Then we can form

indent 1 (
    align (
        let* a = align p in
        let* b = align q in
        return (a,b)
))

This combinator parses p whose first token has to be indented at least one column relative to its parent. And then it parses q whose first token must be aligned with the first token of p.

The indentation decouples the alignment of p and q with other aligned siblings or parents. indent 0 ... can be used to make the indentation optional.

Like align but the leftmost token have to be at the lowest allowed column.

If a whole sequence of aligned constructs have to be left aligned, then at least the first item of the sequence has to be left aligned.

detach p Parse p as if there were no indentation and alignment requirements.

make s p Make the parser from the combinator p and start it in state s.

The parser parses a construct described by the combinator p followed by the end of input. Note that there must not be any combinator generated from expect_end within the combinator p. The function make adds the corresponding expect_end for you.

make_partial s p Make a partial parser from the combinator p and start it in state s.

The generated partial parser ends whenever it encounters an error or it has recognized a construct described by the combinator p even if after the construct the input does not end. An end of input after the construct is not consumed by the parser. See section Partial Parsing for details.