package core_kernel

  1. Overview
  2. Docs
Legend:
Library
Module
Module type
Parameter
Class
Class type
type underlying = Base.Float.t

Time of day.

t represents a clock-face time of day. Usually this is equivalent to a time-offset from midnight, and each t occurs exactly once in each calendar day. However, when daylight saving time begins or ends, some clock face times (and therefore t's) can occur more than once per day or not at all, and e.g. 04:00 can occur three or five hours after midnight, so knowing your current offset from midnight is *not* in general equivalent to knowing the current t.

(See Zone for tools to help you cope with DST.)

There is one nonstandard representable value, start_of_next_day, which can be thought of as "24:00:00" in 24-hour time. It is essentially "00:00:00" on the next day. By having this value, we allow comparisons against a strict upper bound on t values. However, it has some odd properties; for example, Time.of_date_ofday ~zone date start_of_next_day |> Time.to_date ~zone yields a different date.

Any ofday will satisfy start_of_day <= ofday <= start_of_next_day.

type t = private underlying
include Bin_prot.Binable.S with type t := t
val bin_size_t : t Bin_prot.Size.sizer
val bin_write_t : t Bin_prot.Write.writer
val bin_read_t : t Bin_prot.Read.reader
val __bin_read_t__ : (int -> t) Bin_prot.Read.reader
val bin_shape_t : Bin_prot.Shape.t
val bin_writer_t : t Bin_prot.Type_class.writer
val bin_reader_t : t Bin_prot.Type_class.reader
val bin_t : t Bin_prot.Type_class.t
include Ppx_sexp_conv_lib.Sexpable.S with type t := t
val t_of_sexp : Sexplib0.Sexp.t -> t
val sexp_of_t : t -> Sexplib0.Sexp.t
include Typerep_lib.Typerepable.S with type t := t
val typerep_of_t : t Typerep_lib.Std_internal.Typerep.t
val typename_of_t : t Typerep_lib.Typename.t
include Interfaces.Comparable_binable with type t := t
include Base.Comparable.S with type t := t
val (>=) : t -> t -> bool
val (<=) : t -> t -> bool
val (=) : t -> t -> bool
val (>) : t -> t -> bool
val (<) : t -> t -> bool
val (<>) : t -> t -> bool
val equal : t -> t -> bool
val compare : t -> t -> int
val min : t -> t -> t
val max : t -> t -> t
val ascending : t -> t -> int
val descending : t -> t -> int
val between : t -> low:t -> high:t -> bool
val clamp_exn : t -> min:t -> max:t -> t
val clamp : t -> min:t -> max:t -> t Base__.Or_error.t
type comparator_witness
val validate_lbound : min:t Base__.Maybe_bound.t -> t Base__.Validate.check
val validate_ubound : max:t Base__.Maybe_bound.t -> t Base__.Validate.check
val validate_bound : min:t Base__.Maybe_bound.t -> max:t Base__.Maybe_bound.t -> t Base__.Validate.check
module Replace_polymorphic_compare : sig ... end
include Comparator.S with type t := t with type comparator_witness := comparator_witness
module Map : sig ... end
module Set : sig ... end
include Interfaces.Hashable_binable with type t := t
val hash_fold_t : Ppx_hash_lib.Std.Hash.state -> t -> Ppx_hash_lib.Std.Hash.state
val hash : t -> Ppx_hash_lib.Std.Hash.hash_value
val hashable : t Core_kernel__.Hashtbl.Hashable.t
module Table : sig ... end
module Hash_set : sig ... end
module Hash_queue : sig ... end
val pp : Base__.Formatter.t -> t -> unit
include Interfaces.Robustly_comparable with type t := t
val (>=.) : t -> t -> bool
val (<=.) : t -> t -> bool
val (=.) : t -> t -> bool
val (>.) : t -> t -> bool
val (<.) : t -> t -> bool
val (<>.) : t -> t -> bool
val robustly_compare : t -> t -> int

of_string supports and correctly interprets 12h strings with the following suffixes:

      "A", "AM", "A.M.", "A.M"
      "P", "PM", "P.M.", "P.M"

as well as the lowercase and space-prefixed versions of these suffixes.

of_string also fully supports 24h wall-clock times.

to_string only produces the 24h format.

val of_string : string -> t
val to_string : t -> string
val create : ?hr:Base.Int.t -> ?min:Base.Int.t -> ?sec:Base.Int.t -> ?ms:Base.Int.t -> ?us:Base.Int.t -> ?ns:Base.Int.t -> Base.Unit.t -> t
val to_parts : t -> Core_kernel__.Span_float.Parts.t
val start_of_day : t

Smallest valid ofday.

val start_of_next_day : t

Largest representable ofday; see notes above on how start_of_next_day behaves differently from other ofday values.

val approximate_end_of_day : t

A time very close to the end of a day. Not necessarily the largest representable value before start_of_next_day, but as close as possible such that using this ofday with Time.of_date_ofday and Time.to_date should round-trip to the same date. With floating-point representations of time, this may not be possible for dates extremely far from epoch.

The clock-face time represented by approximate_end_of_day may vary with different time and ofday representations, depending on their precision.

val to_span_since_start_of_day : t -> Base.Float.t

Note that these names are only really accurate on days without DST transitions. When clocks move forward or back, of_span_since_start_of_day_exn s will not necessarily occur s after that day's midnight.

val of_span_since_start_of_day_exn : Base.Float.t -> t
val of_span_since_start_of_day : Base.Float.t -> t
  • deprecated [since 2018-04] use [of_span_since_start_of_day_exn] instead
val add : t -> Base.Float.t -> t Base.Option.t

add t s shifts the time of day t by the span s. It returns None if the result is not in the same 24-hour day.

val sub : t -> Base.Float.t -> t Base.Option.t
val next : t -> t Base.Option.t

next t return the next t (next t > t) or None if t = end of day.

val prev : t -> t Base.Option.t

prev t return the previous t (prev t < t) or None if t = start of day.

val diff : t -> t -> Base.Float.t

diff t1 t2 returns the difference in time between two ofdays, as if they occurred on the same 24-hour day.

val small_diff : t -> t -> Base.Float.t

Returns the time-span separating the two of-days, ignoring the hour information, and assuming that the of-days represent times that are within a half-hour of each other. This is useful for comparing two ofdays in unknown time-zones.

val to_string_trimmed : t -> Base.String.t

Trailing groups of zeroes are trimmed such that the output is printed in terms of the smallest non-zero units among nanoseconds, microseconds, milliseconds, or seconds; or minutes if all of the above are zero.

val to_sec_string : t -> Base.String.t

HH:MM:SS, without any subsecond components. Seconds appear even if they are zero.

val of_string_iso8601_extended : ?pos:Base.Int.t -> ?len:Base.Int.t -> Base.String.t -> t

24-hour times according to the ISO 8601 standard. This function can raise.

val to_millisecond_string : t -> Base.String.t

with milliseconds

val to_millisec_string : t -> Base.String.t
  • deprecated [since 2018-04] use [to_millisecond_string] instead
OCaml

Innovation. Community. Security.