The type for block errors.

pp_error is the pretty-printer for errors.

The type for write errors.

pp_write_error is the pretty-printer for write errors.

The type representing the internal state of the block device

Disconnect from the device. While this might take some time to complete, it can never result in an error.

Query the characteristics of a specific block device

read device sector_start buffers reads data starting at sector_start from the block device into buffers. Ok () means the buffers have been filled. Error _ indicates an I/O error has happened and some of the buffers may not be filled. Each of elements in the list buffers must be a whole number of sectors in length. The list of buffers can be of any length. Some implementations may further require that each element in buffers is exactly sector_size long.

write device sector_start buffers writes data from buffers onto the block device starting at sector_start. Ok () means the contents of the buffers have been written. Error _ indicates a partial failure in which some of the writes may not have happened.

Once submitted, it is not possible to cancel a request and there is no timeout.

The operation may fail with: `Is_read_only: the device is read-only, no data has been written.

Each of buffers must be a whole number of sectors in length. The list of buffers can be of any length. Some implementations may further require that each element in buffers is exactly sector_size long.

The data will not be copied, so the supplied buffers must not be re-used until the IO operation completes.