module String: String
typet =
string
The type for strings.
val make : int -> char -> string
make n c
is a string of length n
with each index holding the
character c
.
Invalid_argument
if n < 0
or n >
Sys.max_string_length
.val init : int -> (int -> char) -> string
init n f
is a string of length n
with index
i
holding the character f i
(called in increasing index order).
Invalid_argument
if n < 0
or n >
Sys.max_string_length
.val empty : string
The empty string.
val of_bytes : bytes -> string
Return a new string that contains the same bytes as the given byte sequence.
val to_bytes : string -> bytes
Return a new byte sequence that contains the same bytes as the given string.
val length : string -> int
length s
is the length (number of bytes/characters) of s
.
val get : string -> int -> char
get s i
is the character at index i
in s
. This is the same
as writing s.[i]
.
Invalid_argument
if i
not an index of s
.Note. The (^)
binary operator concatenates two
strings.
val concat : string -> string list -> string
concat sep ss
concatenates the list of strings ss
, inserting
the separator string sep
between each.
Invalid_argument
if the result is longer than
Sys.max_string_length
bytes.val cat : string -> string -> string
cat s1 s2
concatenates s1 and s2 (s1 ^ s2
).
Invalid_argument
if the result is longer than
Sys.max_string_length
bytes.val equal : t -> t -> bool
equal s0 s1
is true
if and only if s0
and s1
are character-wise
equal.
val compare : t -> t -> int
compare s0 s1
sorts s0
and s1
in lexicographical order. compare
behaves like compare
on strings but may be more efficient.
val starts_with : prefix:string -> string -> bool
starts_with
~prefix s
is true
if and only if s
starts with
prefix
.
val ends_with : suffix:string -> string -> bool
ends_with
~suffix s
is true
if and only if s
ends with suffix
.
val contains_from : string -> int -> char -> bool
contains_from s start c
is true
if and only if c
appears in s
after position start
.
Invalid_argument
if start
is not a valid position in s
.val rcontains_from : string -> int -> char -> bool
rcontains_from s stop c
is true
if and only if c
appears in s
before position stop+1
.
Invalid_argument
if stop < 0
or stop+1
is not a valid
position in s
.val contains : string -> char -> bool
contains s c
is String.contains_from
s 0 c
.
val sub : string -> int -> int -> string
sub s pos len
is a string of length len
, containing the
substring of s
that starts at position pos
and has length
len
.
Invalid_argument
if pos
and len
do not designate a valid
substring of s
.val split_on_char : char -> string -> string list
split_on_char sep s
is the list of all (possibly empty)
substrings of s
that are delimited by the character sep
.
The function's result is specified by the following invariants:
sep
as a separator returns a
string equal to the input (concat (make 1 sep)
(split_on_char sep s) = s
).sep
character.val map : (char -> char) -> string -> string
map f s
is the string resulting from applying f
to all the
characters of s
in increasing order.
val mapi : (int -> char -> char) -> string -> string
mapi f s
is like String.map
but the index of the character is also
passed to f
.
val fold_left : ('a -> char -> 'a) -> 'a -> string -> 'a
fold_left f x s
computes f (... (f (f x s.[0]) s.[1]) ...) s.[n-1]
,
where n
is the length of the string s
.
val fold_right : (char -> 'a -> 'a) -> string -> 'a -> 'a
fold_right f s x
computes f s.[0] (f s.[1] ( ... (f s.[n-1] x) ...))
,
where n
is the length of the string s
.
val for_all : (char -> bool) -> string -> bool
for_all p s
checks if all characters in s
satisfy the predicate p
.
val exists : (char -> bool) -> string -> bool
exists p s
checks if at least one character of s
satisfies the predicate
p
.
val trim : string -> string
trim s
is s
without leading and trailing whitespace. Whitespace
characters are: ' '
, '\x0C'
(form feed), '\n'
, '\r'
, and '\t'
.
val escaped : string -> string
escaped s
is s
with special characters represented by escape
sequences, following the lexical conventions of OCaml.
All characters outside the US-ASCII printable range [0x20;0x7E] are escaped, as well as backslash (0x2F) and double-quote (0x22).
The function Scanf.unescaped
is a left inverse of escaped
,
i.e. Scanf.unescaped (escaped s) = s
for any string s
(unless
escaped s
fails).
Invalid_argument
if the result is longer than
Sys.max_string_length
bytes.val uppercase_ascii : string -> string
uppercase_ascii s
is s
with all lowercase letters
translated to uppercase, using the US-ASCII character set.
val lowercase_ascii : string -> string
lowercase_ascii s
is s
with all uppercase letters translated
to lowercase, using the US-ASCII character set.
val capitalize_ascii : string -> string
capitalize_ascii s
is s
with the first character set to
uppercase, using the US-ASCII character set.
val uncapitalize_ascii : string -> string
uncapitalize_ascii s
is s
with the first character set to lowercase,
using the US-ASCII character set.
val iter : (char -> unit) -> string -> unit
iter f s
applies function f
in turn to all the characters of s
.
It is equivalent to f s.[0]; f s.[1]; ...; f s.[length s - 1]; ()
.
val iteri : (int -> char -> unit) -> string -> unit
iteri
is like String.iter
, but the function is also given the
corresponding character index.
val index_from : string -> int -> char -> int
index_from s i c
is the index of the first occurrence of c
in
s
after position i
.
Not_found
if c
does not occur in s
after position i
.Invalid_argument
if i
is not a valid position in s
.val index_from_opt : string -> int -> char -> int option
index_from_opt s i c
is the index of the first occurrence of c
in s
after position i
(if any).
Invalid_argument
if i
is not a valid position in s
.val rindex_from : string -> int -> char -> int
rindex_from s i c
is the index of the last occurrence of c
in
s
before position i+1
.
Not_found
if c
does not occur in s
before position i+1
.Invalid_argument
if i+1
is not a valid position in s
.val rindex_from_opt : string -> int -> char -> int option
rindex_from_opt s i c
is the index of the last occurrence of c
in s
before position i+1
(if any).
Invalid_argument
if i+1
is not a valid position in s
.val index : string -> char -> int
index s c
is String.index_from
s 0 c
.
val index_opt : string -> char -> int option
index_opt s c
is String.index_from_opt
s 0 c
.
val rindex : string -> char -> int
rindex s c
is String.rindex_from
s (length s - 1) c
.
val rindex_opt : string -> char -> int option
rindex_opt s c
is String.rindex_from_opt
s (length s - 1) c
.
val to_seq : t -> char Seq.t
to_seq s
is a sequence made of the string's characters in
increasing order. In "unsafe-string"
mode, modifications of the string
during iteration will be reflected in the sequence.
val to_seqi : t -> (int * char) Seq.t
to_seqi s
is like String.to_seq
but also tuples the corresponding index.
val of_seq : char Seq.t -> t
of_seq s
is a string made of the sequence's characters.
val get_utf_8_uchar : t -> int -> Uchar.utf_decode
get_utf_8_uchar b i
decodes an UTF-8 character at index i
in
b
.
val is_valid_utf_8 : t -> bool
is_valid_utf_8 b
is true
if and only if b
contains valid
UTF-8 data.
val get_utf_16be_uchar : t -> int -> Uchar.utf_decode
get_utf_16be_uchar b i
decodes an UTF-16BE character at index
i
in b
.
val is_valid_utf_16be : t -> bool
is_valid_utf_16be b
is true
if and only if b
contains valid
UTF-16BE data.
val get_utf_16le_uchar : t -> int -> Uchar.utf_decode
get_utf_16le_uchar b i
decodes an UTF-16LE character at index
i
in b
.
val is_valid_utf_16le : t -> bool
is_valid_utf_16le b
is true
if and only if b
contains valid
UTF-16LE data.
val create : int -> bytes
create n
returns a fresh byte sequence of length n
.
The sequence is uninitialized and contains arbitrary bytes.
Invalid_argument
if n < 0
or n >
Sys.max_string_length
.val set : bytes -> int -> char -> unit
set s n c
modifies byte sequence s
in place,
replacing the byte at index n
with c
.
You can also write s.[n] <- c
instead of set s n c
.
Invalid_argument
if n
is not a valid index in s
.val blit : string -> int -> bytes -> int -> int -> unit
blit src src_pos dst dst_pos len
copies len
bytes
from the string src
, starting at index src_pos
,
to byte sequence dst
, starting at character number dst_pos
.
Invalid_argument
if src_pos
and len
do not
designate a valid range of src
, or if dst_pos
and len
do not designate a valid range of dst
.val copy : string -> string
Return a copy of the given string.
val fill : bytes -> int -> int -> char -> unit
fill s pos len c
modifies byte sequence s
in place,
replacing len
bytes by c
, starting at pos
.
Invalid_argument
if pos
and len
do not
designate a valid substring of s
.val uppercase : string -> string
Return a copy of the argument, with all lowercase letters translated to uppercase, including accented letters of the ISO Latin-1 (8859-1) character set.
val lowercase : string -> string
Return a copy of the argument, with all uppercase letters translated to lowercase, including accented letters of the ISO Latin-1 (8859-1) character set.
val capitalize : string -> string
Return a copy of the argument, with the first character set to uppercase, using the ISO Latin-1 (8859-1) character set..
val uncapitalize : string -> string
Return a copy of the argument, with the first character set to lowercase, using the ISO Latin-1 (8859-1) character set.
The functions in this section binary decode integers from strings.
All following functions raise Invalid_argument
if the characters
needed at index i
to decode the integer are not available.
Little-endian (resp. big-endian) encoding means that least
(resp. most) significant bytes are stored first. Big-endian is
also known as network byte order. Native-endian encoding is
either little-endian or big-endian depending on Sys.big_endian
.
32-bit and 64-bit integers are represented by the int32
and
int64
types, which can be interpreted either as signed or
unsigned numbers.
8-bit and 16-bit integers are represented by the int
type,
which has more bits than the binary encoding. These extra bits
are sign-extended (or zero-extended) for functions which decode 8-bit
or 16-bit integers and represented them with int
values.
val get_uint8 : string -> int -> int
get_uint8 b i
is b
's unsigned 8-bit integer starting at character
index i
.
val get_int8 : string -> int -> int
get_int8 b i
is b
's signed 8-bit integer starting at character
index i
.
val get_uint16_ne : string -> int -> int
get_uint16_ne b i
is b
's native-endian unsigned 16-bit integer
starting at character index i
.
val get_uint16_be : string -> int -> int
get_uint16_be b i
is b
's big-endian unsigned 16-bit integer
starting at character index i
.
val get_uint16_le : string -> int -> int
get_uint16_le b i
is b
's little-endian unsigned 16-bit integer
starting at character index i
.
val get_int16_ne : string -> int -> int
get_int16_ne b i
is b
's native-endian signed 16-bit integer
starting at character index i
.
val get_int16_be : string -> int -> int
get_int16_be b i
is b
's big-endian signed 16-bit integer
starting at character index i
.
val get_int16_le : string -> int -> int
get_int16_le b i
is b
's little-endian signed 16-bit integer
starting at character index i
.
val get_int32_ne : string -> int -> int32
get_int32_ne b i
is b
's native-endian 32-bit integer
starting at character index i
.
val get_int32_be : string -> int -> int32
get_int32_be b i
is b
's big-endian 32-bit integer
starting at character index i
.
val get_int32_le : string -> int -> int32
get_int32_le b i
is b
's little-endian 32-bit integer
starting at character index i
.
val get_int64_ne : string -> int -> int64
get_int64_ne b i
is b
's native-endian 64-bit integer
starting at character index i
.
val get_int64_be : string -> int -> int64
get_int64_be b i
is b
's big-endian 64-bit integer
starting at character index i
.
val get_int64_le : string -> int -> int64
get_int64_le b i
is b
's little-endian 64-bit integer
starting at character index i
.